Parts for Whirlpool WEG730H0DS0: 02 - Cooktop Parts

The burner orifice spud meters gas flow to your range's top burner. Replace worn, clogged, or incorrect orifices to restore proper flame output and combustion.

LP orifice kit for gas range bake and broil burners. Includes conversion orifices to switch from natural gas to liquid propane. Replace when missing.

Replace worn or chipped range burner caps to restore proper flame distribution and heating efficiency. Set of 5 caps in Wetstone finish. Verify fit with your model number before ordering.

Black burner cap for gas range cooktops. Covers the burner base and directs flame. Replace if cracked, chipped, discolored, or missing. Set of 5 caps.

Black control panel for gas ranges. Replaces the front panel housing display and controls when original is cracked, chipped, discolored, or missing.

This electronic control panel replaces a worn or damaged front user interface to restore reliable oven/range control and display feedback. It provides the buttons and display elements that let you select and monitor cooking functions. What it does:

• Houses the push buttons/touch controls and display used to select cycles, temperatures, and timers
• Registers user input and communicates commands to the range/oven control system
• Shows status, time, and error messages on the built-in display
• Common symptom fix for unresponsive buttons, missing/blank display segments, or intermittent control feedback

What's included: One control panel assembly Install notes:

• Disconnect power at the household breaker before starting any repair
• Handle the panel and ribbon/connector carefully to avoid damage to the display and electronics
• Installation typically requires removing the front trim/screws and reconnecting the existing wiring harness

Distributes gas through ports to create an even cooking flame. Replace if cracked, clogged, or worn to restore proper ignition and consistent heat output.

Burner head sits on the burner base to distribute gas evenly through ports. Replace if cracked, warped, clogged, or missing to restore proper flame distribution.

Burner head for gas ranges and cooktops. Distributes gas evenly for stable flame. Replace if cracked, warped, or damaged to restore proper burner operation.

Complete cooktop assembly for your range. Replaces cracked, damaged, or worn cooktop surfaces. Includes burner openings and mounting hardware.

White control knob for range stovetop. Replaces cracked, broken, or missing knobs. Mounts directly onto the control panel stem for temperature selection.

Black control knob for range burner or oven settings. Replaces cracked, broken, or missing knobs. Installs on the front control panel for operation.

Replace broken, cracked, or worn burner control knobs on your range. This knob installs on the control panel to adjust heat settings for cooktop burners.

White control knob for range stovetop. Installs on control panel to adjust burner heat settings. Replace if cracked, faded, or missing.

Control knob mounts on the range control shaft for selecting settings. Replace if cracked, stripped, or broken to restore precise adjustment and factory appearance.

Replace a cracked, broken, or missing control knob on your range. This knob installs on the control panel shaft to adjust burner settings and oven temperature.

Replacement grate kit for gas range cooktops. Supports pots and pans over burners. Install when original grates are cracked, warped, or missing.

Replace worn, cracked, or damaged burner grates on your range. This grate kit provides a stable cooking surface and installs on the cooktop.

Torx screw secures burner assemblies, igniters, and internal components in gas cooktops and ranges. Replace rusted, stripped, or broken screws.

Support bracket for electric and gas ranges. Replaces broken, bent, or missing brackets that secure range components. Direct fit replacement hardware.

Support bracket for electric and gas ranges. Secures internal components in place. Replace if bracket is bent, cracked, or broken during repair work.

Supports and guides your range drawer for smooth opening and closing. Replace when drawer sticks, drags, or derails. Verify fit with your model number.

End cap panel for electric and gas ranges. Covers the exposed side edge of the range for a finished look. Replace if cracked, chipped, or missing.

Replacement end cap panel that covers and protects the outer edge of your range cabinet. Restores a finished look when original trim is cracked or missing.

White vent trim for gas ranges. Replaces cracked, discolored, or missing trim pieces around range vents. Restores clean appearance to your cooktop.

Black powder-coated rear vent trim cover for gas ranges. Installs above the oven cavity. Replace if cracked, chipped, or missing for a clean finish.

Fix blank displays, F1E0 errors, or unresponsive controls. This range electronic control board restores oven timing and reliable operation.

Range won't respond to controls or shows relay error codes? This electronic control board manages oven and cooktop functions. Moderate DIY repair.

Secures range components to cabinet or chassis. Replace this bracket if cracked, broken, or missing to restore proper alignment and reduce vibration.

Control panel buttons not responding after spill? This range membrane switch restores keypad function. Common fix for unresponsive touch controls.

Control panel buttons not responding? This range membrane switch touch pad restores button function and lets you enter cooking settings again.

Fix unresponsive buttons or stuck key error codes with this range membrane switch touchpad. Restores control panel functionality for reliable operation.

Replace cracked or missing rubber bumpers on your range. This protective pad cushions and stabilizes components, typically securing with a screw.

Support bracket for electric and gas ranges. Secures internal components in place. Replace if bracket is bent, cracked, broken, or missing.

Small insert component that fits into a specific location on your range to secure, align, or finish an assembly. Replace when worn, damaged, or missing.

Secures components or panels to your range frame. Replace if cracked, bent, or missing to eliminate rattling, looseness, or shifting parts.

Replace missing or stripped screws for your range anti-tip bracket. This 2-piece hardware set secures the bracket to the wall or floor for stability.

Fix a washer agitator that slips or won't turn. This anchor tip secures the agitator to the drive shaft, restoring proper rotation during wash cycles.

Bushing sleeve that fits inside range control knobs to reduce friction and ensure smooth turning. Replace if knob feels loose, wobbly, or damaged.

Secures wire harness connections in your washer. Replace if clip is broken, cracked, or missing to prevent loose wiring. Verify fit with your model number.

Ground wire for gas ranges. Connects electrical components to ensure proper grounding. Replace if wire is frayed, damaged, or disconnected during repairs.

Fix intermittent power, control failures, or burned wiring in your range. This main wire harness assembly restores electrical connections between components.

Replacement clip for dishwashers. Secures components and panels in place. Replace if cracked, broken, or missing to restore proper assembly and fit.

Wire harness for gas ranges. Connects electrical components inside the range. Replace if wires are damaged, frayed, cracked, or connections are loose or worn.

Display not working or showing error codes? This wire harness connects your range control panel to the main board. Moderate DIY repair with basic tools.

Fix F2:E0 error codes with this range keypad wire harness. Connects keypad to control board for proper communication. Moderate DIY repair task.