Parts for Lg LMXS30776D/04: Ice Maker & Ice Bin Parts

This is a genuine replacement screw used to secure appliance panels and components. It restores proper fastening so panels and assemblies stay aligned and operate safely. What it does:

• Fastens panels, brackets, and small assemblies to maintain structural integrity
• Replaces missing or stripped screws that cause rattling or loose parts
• Helps stop vibration-related noise when used in its original mounting locations
• Matches the OEM fit to ensure proper alignment and clearance

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten to prevent thread or component damage
• Disconnect power to the appliance before working on electrical components
• Replace all matching fasteners for even fit

A single mounting screw used to secure panels, brackets, or components in place so assemblies stay stable during normal appliance use. Simple replacement for stripped or missing fasteners. What it does:

• Secures panels, trim, brackets or interior components to prevent rattling or movement
• Restores proper fit and alignment after service or accidental damage
• Helps reattach parts removed during maintenance or part replacement
• Small, durable fastener designed for appliance interior mounting applications

• Use the correct screw driver or bit to avoid stripping the head
• Match screw length and thread engagement to the original location before tightening
• Tighten until snug—do not overtighten to avoid cracking plastic or damaging threads
• Disconnect power and follow appliance safety procedures before performing repairs

This replacement mounting screw secures appliance panels and components to restore proper fit and reduce rattling or loose parts. Simple, direct replacement when a worn or missing screw causes loose panels or intermittent contact. What it does:

• Fastens panels, brackets, or small components to maintain proper alignment and reduce vibration
• Prevents loose trim, covers, or assemblies that can cause noise or improper sealing
• Replaces missing, stripped, or corroded screws that interfere with reliable operation
• Works wherever the OEM screw specification is required for secure mounting

• Use the matching screw hole and tighten until snug; avoid over-torquing to prevent stripping
• Disconnect power to the appliance if accessing electrical or moving parts near the work area
• If multiple screws are missing or panels are damaged, replace all fasteners for even support

This screw is a direct-fit replacement fastener that secures panels, brackets, and internal components. Replacing a missing or stripped screw helps stop rattling and keeps parts aligned for reliable operation. What it does:

• Secures panels, trim, brackets, or internal components to restore proper fit
• Replaces missing or damaged hardware that can cause rattling or loose parts
• Restores alignment so doors, shelves, or assemblies operate smoothly
• Provides a straightforward hardware fix without replacing larger assemblies

• Use the matching screwdriver or driver bit to avoid stripping the head
• Do not overtighten — snug until seated to avoid damaging threads or plastic parts
• Disconnect power or follow appliance safety instructions before servicing electrical areas
• Keep removed hardware organized and save any damaged parts for inspection

The Handle Mounting Stud is an OEM replacement part for LG refrigerator doors. It provides a sturdy mounting point for the door handle assembly. Reliable handle connection and support is crucial for dependable door function and access. 

Causes of a faulty stud can include damage from excess weight or impact over time rendering the stud loose or unstable.

Symptoms of a bad stud include:

• Loose or sagging door handle  
• Difficulty opening and closing the refrigerator door  
• Potential for the handle to detach completely
• Safety concerns if the handle connection fails

This OEM LG replacement stud is also compatible with Sears/Kenmore models. 

This is a replacement screw used to secure appliance panels, trim, and small components so damaged or missing fasteners don't leave parts loose. It restores proper fit and reduces rattling and movement. What it does:

• Secures panels, trim pieces, or internal components to restore proper fit
• Stops panels from shifting or vibrating during use
• Replaces stripped, corroded, or missing screws that prevent proper assembly
• Helps eliminate rattling noises caused by loose fasteners

• One replacement screw as pictured

• Unplug the appliance or shut off power before installing
• Use the correct screwdriver or bit to avoid stripping the head
• Hand-start the screw, then snug—do not overtighten to avoid cracking plastic parts
• If screw threads are damaged, replace with the exact OEM screw to ensure proper fit

This is a customized screw used to secure components in LG appliances. It replaces a worn or missing fastener to restore proper assembly and reduce rattling or loose panels. What it does:

• Secures panels, brackets, or small components in the appliance chassis
• Helps stop vibration-related noise caused by loose fasteners
• Replaces missing or stripped screws to restore safe, stable assembly
• Matches OEM fit for the specific mounting point it was made for

• Use the correct screwdriver or driver bit to avoid stripping the head
• Tighten until snug; avoid over-torquing which can damage threads or parts
• Disconnect power and follow appliance-specific safety procedures before servicing

This is a replacement drain tube assembly that directs water from the appliance tub to the drain pump or household drain, helping restore proper water removal and reduce leaks. It's a direct-fit service part used in the drainage system. What it does:

• Channels wastewater away from the tub to the drain pump or drain line
• Helps prevent pooling or slow draining caused by a damaged or disconnected tube
• Restores a sealed path to reduce leaks at the tub-to-pump connection
• Suitable when the original drain tube is cracked, split, collapsed, or leaking

• One drain tube assembly as shown

• Disconnect power and water before beginning any repair to avoid shock or flooding
• Inspect and clean mating surfaces and clamps; replace clamps if corroded or damaged
• Ensure correct routing and secure connections to prevent kinks and leaks

The Leveling Leg is an OEM part for LG refrigerators. It is one of the four legs at the bottom corners that elevate and provide stability to the entire appliance.

Causes of failure can be broken mounting points that no longer provide secure elevation, full compression of the built-in cushioning, or damage from impact on an unlevel floor.

Symptoms of a faulty leveling leg include:

• Excessive shaking or vibrating of the refrigerator
• Door alignment issues where doors are difficult to open or close fully
• Visible leaning or misalignment of the refrigerator cabinet

This OEM LG part is also compatible with some Kenmore models.

This replacement duct assembly routes exhaust air and restores proper airflow in compatible dryer units. It helps maintain efficient venting and reduces airflow restrictions that cause longer cycle times or overheating. What it does:

• Channels dryer exhaust to the vent to maintain airflow
• Replaces damaged, crushed or disconnected ducting that can restrict airflow
• Helps reduce extended drying times and poor drying performance linked to vent issues
• Addresses vent noise or vibration caused by loose or misaligned duct components

• Disconnect power and unplug the appliance before starting any repair
• Access may require removing the dryer rear panel or cabinet
• Ensure all hose clamps and seals are tight and the duct path is free of lint or obstructions
• If venting runs outdoors, the exterior vent is clear for proper exhaust

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components

This drum roller replaces a worn support wheel that helps the dryer drum spin smoothly, reducing noise and preventing drum wobble. Restores quieter operation and proper drum alignment. What it does:

• Supports the dryer drum so it rotates evenly during a cycle
• Reduces squealing, scraping, or grinding noises from the drum area
• Helps stop drum wobble and uneven spinning that can cause wear
• Can reduce rubbing or burning smells caused by a seized or worn roller

• Disconnect power before starting any repairs; electric shock hazard.
• Typically accessed by removing the dryer front panel and drum—use care to support the drum.
• Inspect adjoining idler, belt, and rear rollers when replacing for complete repair.

The Shelf Assembly is an OEM replacement part for LG refrigerators. It provides a movable shelf surface for organizing and storing items in the refrigerator or freezer compartment. 

Symptoms of a bad shelf assembly include:

• Sagging or bowing of the shelf surface 
• Difficulty in moving or removing the shelf
• Damage or cracks in the frame or wire grid
•  Inability to bear weight as intended

Causes of failure can be repeated overloading, accidental impacts, or normal wear and tear over time. 

This authentic LG shelf assembly is also compatible with refrigerators by Kenmore models.

This Drawer Tray Assembly replaces a damaged or worn crisper/produce drawer to restore storage and organization in your refrigerator. It provides a stable surface for fruits and vegetables and helps keep produce contained and ventilated. What it does:

• Replaces a cracked, warped or broken crisper/produce drawer tray
• Restores smooth sliding and proper seating in the refrigerator drawer cavity
• Helps contain spills and keeps produce organized
• Supports normal airflow/venting designed for the drawer area

• Unplug the refrigerator or disconnect power before servicing
• Remove the old drawer by pulling out and lifting to disengage; align new tray with rails and slide into place
• Check for proper seating and smooth operation after installation

This drawer tray assembly replaces a damaged or worn refrigerator storage drawer to restore stable storage and smooth operation. It supports food storage and helps the drawer open and close as designed. What it does:

• Replaces cracked, warped, or broken drawer tray that no longer supports items
• Restores proper seating and alignment so the drawer slides smoothly
• Prevents items from falling through or catching on damaged edges
• Helps maintain internal organization and usable refrigerator space

• Disconnect power to the appliance before servicing to avoid injury
• Handle the tray carefully to avoid damage to plastic edges or clips
• Remove any contents and existing drawer components before installing
• If the drawer uses mounting clips or rails, inspect and replace damaged hardware as needed for proper fit

This drawer tray assembly replaces a damaged or worn refrigerator/freezer drawer tray to restore stable storage and proper sliding action. It keeps contents contained and helps the drawer open and close smoothly. What it does:

• Replaces a broken, cracked, or warped drawer tray that no longer holds items securely
• Restores smooth sliding and proper alignment of the drawer
• Prevents items from shifting or falling when the drawer is opened
• Helps stop scraping noises or rubbing caused by a damaged tray

• Disconnect power and empty the drawer before removing the old tray
• Handle the replacement carefully to avoid damage to plastic tabs or mounting clips
• Use basic hand tools; support the drawer while removing and installing the tray
• If any mounting clips or slides are damaged, inspect and replace them separately

Replacement drawer tray assembly that restores stable support and containment for an interior refrigerator drawer. Helps keep stored items organized and restores proper seating of the drawer. What it does:

• Provides the molded support surface for a refrigerator drawer so contents sit level and secure
• Replaces cracked, warped or damaged trays that cause items to tip or fall
• Helps the drawer seat and align properly in the cabinet
• Common symptoms: visible cracks or breaks, drawer sagging, contents sliding or falling, tray detached from drawer frame

• One drawer tray assembly

• Remove food and slide the drawer out to access the tray; installation is typically a simple align-and-seat replacement
• Use gentle pressure to snap the tray into place; avoid forcing broken plastic parts
• Wear gloves to protect hands from sharp edges on broken pieces
• Unplug the appliance or disconnect power before beginning work

This rail guide assembly restores smooth, supported movement for a refrigerator drawer or shelf that binds, falls, or slips. It replaces broken or worn guide hardware so the drawer opens and closes reliably. What it does:

• Guides and supports the drawer along the cabinet track for smooth sliding motion
• Prevents the drawer from sagging, sticking, or detaching during use
• Reduces scraping, grinding, or noisy operation caused by damaged rails
• Aligns the drawer for proper sealing and even weight distribution

• One rail guide assembly as shown

• Disconnect power to the appliance before service and remove stored items from the drawer
• Remove the drawer and any trim to access the rail
• Inspect mounting clips and fasteners; reuse or replace only the items explicitly specified by the manufacturer

This rail guide assembly restores smooth, stable sliding and alignment for a refrigerator drawer. It replaces worn or damaged drawer rails to help drawers open and close evenly and prevent sticking or dropping. What it does:

• Supports and guides the refrigerator drawer along its track for consistent movement
• Keeps the drawer aligned to prevent rubbing, sticking, or uneven closure
• Helps prevent the drawer from disengaging or falling out when pulled
• Reduces noise and binding caused by worn or damaged rails

• Disconnect power to the appliance or unplug before starting any repair
• Remove the drawer per your model's service instructions to access the rails
• Align the new rail assembly and secure with existing fasteners; do not force parts
• If you encounter damaged mounting points or broken fasteners, stop.

This right-side Freezer Basket Support Rail is an OEM part for LG refrigerators. Located inside the freezer compartment, it provides elevated storage shelves for ice cream, frozen vegetables, meats, and more above the freezer floor.

Causes of a bad support rail can include damages such as cracks or breaks that compromise its load-bearing ability over years of use. Sharp freezer temperatures cause constant contraction and expansion.

Symptoms of a bad support rail include:

• Baskets or containers unstable and prone to tipping
• Reduced storage capacity within the freezer
• Safety concerns if a cracked rail were to fully collapse

This OEM LG part can also be used on Kenmore/Sears appliances. 

The Freezer Basket Support Rail is an OEM part for LG refrigerators. This component is essential for supporting and guiding the freezer basket, allowing it to slide in and out smoothly. The rail measures approximately 13 x 2 inches.

Symptoms of a failing Freezer Basket Support Rail include:

• Difficulty sliding the freezer basket in and out
• Unusual noises such as grinding or squeaking when moving the basket
• The basket becoming misaligned or tilting when pulled
• Visible wear or damage to the rail

Causes of a bad support rail often include mechanical stress from overloading the basket, frequent use which can wear down the material, or accidental damage during cleaning or rearranging items within the freezer.

This OEM LG part is also compatible with Sears/Kenmore.

This holder assembly bracket secures and aligns a small appliance component so it stays in place during normal use, restoring reliable fit and reducing noise or movement caused by a loose part. What it does

• Provides a stable mounting point for the associated component to prevent shifting or detachment
• Restores correct alignment for doors, panels, or internal modules that rely on the bracket
• Helps stop rattling, vibration noise, or intermittent contact caused by a broken or bent bracket
• Supports safe operation by keeping parts properly positioned within the appliance

• Basic hand tools are usually all that's required; follow the appliance service manual for access steps
• Disconnect power (and water, if applicable) before starting any repairs to avoid shock or injury
• Inspect adjacent fasteners and mounting surfaces; replace any stripped screws or damaged clips for a secure fit

This cover assembly is a molded exterior panel that shields and finishes the appliance. Replacing a cracked or missing cover restores proper fit and protection for internal components, and keeps the unit looking the way it should.

• Protects internal components by covering and sealing the opening
• Helps maintain proper alignment with adjacent parts and trim
• Reduces gaps where dust and debris can enter
• Common signs of failure: cracks, broken tabs, loose fit, rattling, or visible damage

• Disconnect power; for appliances with water connections, shut off the water supply
• Note screw locations and take photos before removal for reference
• Transfer any clips, gaskets, badges, or lenses from the original as needed
• Align tabs and mounting holes; snug fasteners without overtightening and confirm clearances before restoring power

This replacement drawer guide helps the freezer/refrigerator drawer slide smoothly and stay aligned for reliable opening and closing. It restores stable support and reduces sticking or noisy movement. What it does:

• Guides the drawer along its track so it opens and closes smoothly
• Supports the drawer weight to prevent sagging or misalignment
• Helps eliminate binding, catching, or uneven movement
• Reduces scraping or rattling noises caused by a worn guide

• Disconnect power to the appliance or unplug before beginning any work
• Remove the drawer and any contents to access the guide mounting points
• Align the guide with the existing track and secure using the original screws or fasteners
• If mounting hardware is damaged or missing, replace with OEM-specified fasteners; do not force parts into place

This vegetable tray assembly replaces a damaged or worn crisper drawer to restore storage for fresh produce and help maintain proper organization in the refrigerator. Designed as a direct-fit replacement identified by the OEM part number. What it does:

• Holds fruits and vegetables to keep them separated from main shelves
• Slides on rails for easy access to stored produce
• Replaces cracked, chipped, or warped crisper trays that no longer seal or slide smoothly
• Restores proper fit and alignment within the refrigerator's drawer cavity

• Remove all food from the drawer area before beginning installation
• Lift out the old tray by disengaging the drawer from its rails; reverse to install the new tray
• Handle with care to avoid damage; inspect rails and catches for wear before reinstalling

A replacement vegetable tray assembly that restores the crisper drawer storage area so produce stays organized and contained. Fits into the lower refrigerator storage compartment to replace cracked, warped or missing trays. What it does:

• Provides a dedicated bin for storing fruits and vegetables to keep the compartment tidy
• Replaces cracked, broken, or warped trays that can leak or fail to hold items
• Slides into existing drawer rails for normal open/close operation
• Helps prevent produce from spilling onto lower shelves and improves usable storage space

• Remove all food from the drawer area before installing
• Slide out the old tray and align the new tray with existing rails; seat fully until it moves smoothly
• Handle edges carefully to avoid cuts from broken plastic; wear gloves if needed
• No electrical disconnection required, but unplug the appliance before performing other service

Restore the produce storage in your refrigerator with this vegetable tray assembly. It replaces a damaged or missing crisper so fruits and vegetables stay organized and the drawer slides correctly in its tracks for everyday use.

• Provides dedicated storage for fruits and vegetables in the fresh food compartment
• Slides in and out smoothly when properly seated on the crisper rails
• Replaces drawers that are cracked, warped, stained, or missing
• Can help resolve issues like jamming, falling off track, or not closing flush

• Remove all items from the old drawer before servicing
• Pull the drawer straight out to the stop, lift the front, and remove
• Inspect and clear any debris from the slides/rails before installing
• Align the rear of the new drawer on the rails and push straight in—do not force

This cover assembly replaces a damaged or missing TV cabinet panel to restore the set's appearance and protect internal electronics from dust and debris. It provides a secure mounting surface for internal modules and keeps the chassis enclosed. What it does

• Replaces cracked, warped, or broken cabinet panels that expose TV internals
• Protects circuit boards, power supply, and connectors from dust and accidental contact
• Restores a finished, factory appearance and helps reduce panel rattling or vibration
• Secures internal components by providing factory mounting points

• Unplug the TV and let capacitors discharge before starting any repairs
• Handle the cover gently to avoid scratches; wear gloves to prevent fingerprints on finished surfaces
• Use the proper screwdrivers and retain all screws; some fasteners may be reused

The Temperature Sensor is an OEM part for LG refrigerators. It monitors the internal temperature and sends this information to the control board, ensuring that the refrigerator maintains the correct temperature for optimal food preservation.

Over time, temperature sensors can fail due to electrical issues, exposure to moisture, or wear and tear from continuous use. 

Symptoms of a bad temperature sensor include:

• Inaccurate temperature readings
• The refrigerator or freezer being too warm or too cold
• The refrigerator running constantly or not running at all
• Error codes displayed on the control panel

This OEM LG part is also compatible with Sears/Kenmore models.

This roller assembly supports and helps the dryer drum turn smoothly, reducing noise and wear for consistent drying. Replace a worn roller to restore steady drum rotation and reduce squeaks or rubbing sounds. What it does:

• Supports the drum while it spins to maintain proper alignment
• Reduces friction and prevents uneven drum movement or scraping
• Commonly replaces worn or noisy rollers that cause squealing or thumping
• Helps prevent premature wear to the drum and support shafts

• One roller assembly

• Disconnect power (and gas supply, if applicable) before starting any repairs
• Access typically requires opening the dryer cabinet; basic hand tools are usually sufficient
• Inspect other drum support components (other rollers, axles, and bearing pads) and replace if worn

This guide assembly positions and secures the TV's front-panel or bezel components to keep controls and trim aligned for a clean fit and reliable button access. Replaces a worn, cracked, or misaligned guide to restore proper panel seating. What it does

• Aligns and supports the TV front panel/bezel so edges meet evenly
• Holds control board/buttons or trim in the correct location
• Prevents rubbing, rattling, or gaps between bezel and chassis
• Helps maintain consistent button feel and keypad alignment

• One guide assembly

• Unplug the TV and place on a soft, stable surface before beginning
• Remove bezel or trim per service manual to access guide locations
• Keep small screws and clips organized; compare old part orientation to new

This guide assembly lines and supports the TV's internal guide or track, helping keep the display aligned and stable for smooth operation and reduced noise. It replaces a worn, broken, or misaligned guide to restore proper panel movement. What it does:

• Provides a stable channel for the TV panel or internal components to slide or rest
• Restores proper alignment to reduce rubbing, scraping, or uneven movement
• Helps eliminate rattles or vibration caused by a loose or damaged guide
• Supports consistent operation of any sliding or guided TV mechanisms

• Disconnect power and remove the TV from its stand or wall mount before starting
• Handle the display and internal components carefully to avoid damage and ESD-sensitive parts
• Follow the manufacturer's service manual for disassembly and reassembly steps and proper fastener torque

A replacement guide rail assembly that supports and guides the appliance drawer or shelf for smooth, stable sliding and proper alignment. Restores reliable movement and helps prevent sticking or binding. What it does:

• Guides the drawer or shelf along its track for consistent, even movement.
• Keeps the sliding component aligned to prevent tilting, binding, or uneven wear.
• Provides structural support for the drawer under normal load.
• Helps restore smooth operation when worn, bent, or damaged rails cause sticking or misalignment.

• Disconnect power and remove stored items before beginning any repair.
• Use basic hand tools; avoid forcing components and do not overtighten mounting hardware.

This ferrite magnet is a replacement magnetic element used in compatible appliance assemblies to help secure components and maintain proper alignment. It restores magnetic retention and reduces shifting or misalignment during operation. What it does:

• Provides magnetic retention for panels, assemblies or components that rely on ferrite magnets
• Helps maintain proper alignment and secure closure where magnets are used
• Can reduce noise and vibration related to loose magnetic components
• Useful when a brittle, cracked or weak magnet no longer holds parts in place

• Disconnect power and follow the appliance manufacturer's safety instructions before servicing
• Handle the magnet carefully; ferrite material is brittle and can chip or shatter if dropped or struck
• Keep magnets away from sensitive electronics and credit cards; avoid pinching fingers between strong magnets
• If the original magnet is bonded or embedded, some adhesive or light trim may be needed for proper fit.

Restore a tight, reliable seal on your refrigerator door with this Door Gasket Assembly. Replacing a worn or damaged gasket helps the unit hold temperature, reduce energy loss, and minimize condensation and frost around the door opening. What it does:

• Seals the door perimeter to keep cold air in and warm air out
• Helps maintain stable internal temperatures and efficiency
• Reduces moisture/condensation around the door area
• Limits frost or ice buildup caused by air leaks
• Common symptoms include tears, gaps, hardening, or a door not closing flush

• 1 door gasket assembly

• Unplug the refrigerator and clear door bins for easier access
• Let the new gasket relax flat; warm gently with a hair dryer or warm water to smooth kinks
• Press the gasket fully into the retainer/channel, starting at the corners and working evenly
• Close the door and check the seal all around; allow up to 24 hours for the gasket to conform

Restore a tight door seal and stop air leaks. This door gasket assembly forms the perimeter seal around the cabinet opening, helping maintain correct temperatures, reduce frost and condensation, and support efficient operation.

• Creates an airtight seal between the door and cabinet to keep conditioned air in
• Helps maintain stable internal temperatures and humidity
• Reduces frost/ice buildup and condensation around the door area
• Common symptoms of a failed gasket include tears, warping, gaps, doors not closing fully, moisture inside, or longer run times

• Disconnect power before servicing the appliance
• Let the new gasket warm and relax (room temperature or warm water); use low heat only if needed to smooth folds
• Start at the corners and press the gasket lip fully into the door's retainer channel, working evenly around
• Adjust door alignment if needed and allow time for the gasket to conform

A decorative door trim handle that restores the look and grip of your appliance door. Replaces scratched, cracked or worn trim so the door looks finished and is easier to open. What it does

• Provides the exterior trim/handle piece used to open and close the appliance door.
• Restores a secure grip when original trim is cracked, broken or loose.
• Improves appearance by replacing scratched or dented decorative trim.
• Works with the factory mounting points for a direct-fit replacement.

• One decor handle (trim) piece as shown.

• Disconnect power (and water supply for refrigerators with water/ice) before starting.
• Remove any trim covers or screws holding the old handle; handle may snap or screw off depending on model.
• Align replacement trim to factory mounting points and secure with original fasteners.

This hinge cap covers and protects the door hinge, keeping the hinge assembly clean and improving the appliance's appearance. It replaces a cracked, missing, or worn hinge cover to help doors operate smoothly and look finished. What it does:

• Covers the door hinge to protect mating surfaces from dirt and damage
• Hides hinge hardware for a cleaner, finished look
• Helps prevent debris from interfering with hinge movement
• Can resolve cosmetic issues and reduce risk of snagging on exposed hinge parts

• One hinge cap

• Remove power and open the door to a safe, supported position before starting
• Typically snaps or screws onto the hinge—retain original fasteners unless replacement required
• Inspect hinge and fasteners while installing; replace any damaged hardware

This hinge cover assembly replaces a damaged or missing trim piece that protects and conceals the appliance hinge, restoring a clean appearance and preventing fabric or items from catching. It's a direct-fit cosmetic and protective cover. What it does:

• Covers and protects the hinge area to prevent snagging and wear on clothing or items
• Conceals hinge mechanisms for a finished appearance
• Helps keep dirt and debris out of the hinge area
• Restores proper alignment of exterior trim when the original is cracked or broken

• One hinge cover assembly

• Disconnect power (and gas/water if applicable) before starting any repair
• Typical installation requires removing the outer panel or door access screws to reach the hinge; keep track of fasteners
• Handle plastic trim carefully to avoid cracking; use non-marring tools where possible

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

This refrigerator door foam assembly restores the insulating core inside the door to help reduce heat transfer and maintain cabinet temperature. Replacing a damaged or compressed foam assembly can improve cooling consistency and reduce frost or condensation on the door. What it does:

• Replaces the insulating foam core inside the refrigerator door to help preserve cold air and energy efficiency.
• Helps eliminate cold spots, condensation, or frosting that can occur when door insulation is damaged or compressed.
• Provides structural support behind the door liner to keep shelves and components aligned.
• Reduces audible rattles or vibration caused by loose or missing insulation.

• One refrigerator door foam assembly.

• Disconnect power to the appliance before starting work to prevent electrical shock.
• Access typically requires removing the door liner or inner panel; retain all fasteners and gaskets for reassembly.
• Handle the foam and inner liner carefully to avoid tearing the liner or damaging door seals.
• If you encounter wiring, lights, or switches behind the liner, disconnect connectors gently and note their locations for correct reconnection.

This replacement home bar case is the molded compartment that fits into the refrigerator door to hold the home-bar area. It restores proper storage and support for bottles and accessories behind the home-bar door. What it does

• Serves as the molded housing/shelf for the refrigerator's home-bar compartment.
• Supports bottles and small items stored behind the home-bar door.
• Helps align and secure the home-bar door and internal components.
• Cracked or damaged cases can cause items to shift, rattle, or fall from the home-bar area.

• One home bar case

• Disconnect power to the appliance before beginning any repair.
• Remove the refrigerator door panel or inner liner as required to access the home-bar case; keep fasteners organized.
• Handle the plastic housing carefully to avoid further cracking; use correct OEM screws and clips for reassembly.
• Test the home-bar door operation and inspect for proper fit before returning the refrigerator to service.

This is the door handle mounting bracket assembly that secures the handle firmly to the door. It replaces a damaged or stripped bracket to restore a solid, wobble-free grip and reliable handle attachment.

• Mounts and secures the door handle to the door/frame
• Maintains alignment to prevent handle wobble or looseness
• Replaces cracked, broken, or stripped brackets to restore proper attachment
• Typical symptoms: loose or wobbly handle, handle pulls off, visible damage at the handle mount, rattling at the handle area

• Disconnect power before servicing and work carefully to avoid damaging the door surface
• Support the handle while loosening and tightening set screws or fasteners
• Retain and reuse original mounting hardware if it's in good condition
• Align the new bracket in the original location; do not overtighten fasteners

This door stopper cushions and limits a refrigerator or appliance door's movement to reduce slamming and protect the cabinet and hinge. It restores smooth, quiet door closing and helps keep the door aligned. What it does

• Absorbs impact when the door is opened or closed to prevent slamming and wear.
• Limits door travel to protect hinges and adjacent cabinet surfaces.
• Helps maintain proper door alignment for a better seal and quieter operation.
• Commonly replaced when the stopper is worn, cracked, or missing.

• One door stopper

• Disconnect power to the appliance or follow manufacturer safety guidance before servicing.
• Typically attaches at the door or frame with a screw or snap fit; remove trim or access panels if needed.
• Inspect surrounding mounting area and replace any worn fasteners or brackets.

Replace a worn home bar door gasket to restore a tight seal and maintain proper cooling in the home bar compartment. This replacement gasket helps prevent cold air loss, reduce condensation, and improve temperature consistency. What it does:

• Creates an airtight seal around the home bar door to keep cold air in and warm air out.
• Helps reduce frost buildup, interior condensation, and uneven temperatures.
• Restores proper door contact to improve cooling performance and reduce strain on the compressor.
• Recommended when the gasket is cracked, torn, warped, or no longer seals evenly.

• Disconnect power to the appliance before beginning any service.
• Clean the door frame and mating surface before installing the new gasket for a proper seal.
• Remove the old gasket and press the new gasket into place evenly; check that the seal is continuous around the door.

This refrigerator door gasket seals the door to the cabinet to keep cold air in and humid air out. Replacing a worn or torn seal restores proper temperatures, reduces frost and condensation, and helps the unit run efficiently.

• Creates an airtight seal between the door and cabinet perimeter
• Helps maintain internal temperature stability and energy efficiency
• Reduces frost/ice buildup and moisture around the door opening
• Common symptoms: visible tears or warping, gaps, door not sealing, warm spots, frost or condensation near the door

• Unplug the appliance before servicing
• Let the new gasket relax flat at room temperature, or gently warm it to make it more pliable
• Clean the sealing surfaces; seat corners first, then work evenly along the sides
• Close the door and check for uniform contact all around; adjust as needed for a consistent seal

This refrigerator door gasket assembly restores a tight, even seal around the door. A proper seal keeps cold air in and moisture out, helping maintain temperature, reduce frost and condensation, and prevent warm spots around the perimeter.

• Forms a continuous seal between the door and cabinet to prevent air leaks
• Helps maintain stable internal temperature and humidity
• Reduces frost/ice and condensation near the door area
• Replace if the gasket is torn, cracked, deformed, or won't sit flat
• Symptoms include gaps around the door, moisture on the gasket, frost buildup, or a door that won't close/seal properly

• Unplug the refrigerator before servicing
• Let the new gasket relax; use warm water or low heat to remove shipping creases
• Insert the gasket lip fully into the door's channel, starting at the corners, then work along the sides
• After installation, close the door and check for uniform contact all around; adjust the gasket as needed

This front plate assembly is the exterior trim piece that restores the appliance's front surface and protects internal components from dirt and damage. It improves appearance and helps maintain a proper seal and alignment. What it does:

• Replaces a cracked, dented, or missing front plate to restore the unit's exterior finish
• Shields controls and internal components from dust, spills, and everyday wear
• Helps maintain proper fit and alignment of adjacent panels and trim
• Returns the appliance to a finished, factory appearance

• Disconnect power to the appliance before beginning any repair.
• Installation typically requires removal of adjacent trim or the control bezel; keep all screws and fasteners for reinstallation.
• Handle the plate carefully to avoid scratching the finish during installation.

This cover lever replaces a damaged or worn dispenser lever cover to restore a clean, functional surface for pressing the dispenser. Helps keep debris out of the lever area and supports reliable lever actuation. What it does:

• Covers and protects the dispenser lever mechanism from chips, cracks, and debris.
• Provides a smooth contact surface for pressing the dispenser to activate water/ice dispensing.
• Helps prevent leaks or improper actuation caused by broken or warped lever covers.
• Restores cosmetic appearance at the dispenser area when the original cover is cracked or missing.

• Disconnect power and shut off the water supply before beginning any work.
• Removal typically requires accessing the dispenser bezel or door panel—use basic hand tools and retain all fasteners.
• Handle clips and tabs carefully to avoid breakage; test dispenser function after reassembly.

This door basket replaces a damaged refrigerator door bin to restore secure storage for bottles, jars and small items. It keeps door contents organized and prevents items from falling when opening or closing the door. What it does:

• Holds bottles, jars and small containers on the refrigerator door for convenient access.
• Replaces cracked, chipped or broken door shelves that allow items to fall or shift.
• Restores a secure snap-fit when the original bin no longer stays attached to the door rails.
• Helps eliminate rattling or loose door storage caused by worn or damaged bins.

• Remove all items from the door shelf before replacing the basket.
• Lift the old basket up and out of the door rails (or tilt as needed) to remove.
• Align the new basket with the door rails and press until it snaps securely into place; tools are rarely required.
• Handle carefully and wear gloves if edges are sharp; verify fit before refilling.

Restore organized, secure door storage. This replacement door bin/basket mounts on the refrigerator door to hold bottles, condiments, and small items so they stay contained, easy to reach, and off the main shelves. What it does

• Attaches to the refrigerator door to provide additional shelf storage
• Helps organize jars, bottles, and condiments for quick access
• Replace when cracked, warped, or with broken mounting tabs
• Symptoms include the bin falling off, not seating level, or items tipping/spilling

• One refrigerator door bin/basket

• Remove all items, then lift the old bin straight up to release from the door tabs
• Align the new bin with the mounting guides and press down until fully seated
• Verify it locks in place before loading; avoid overloading
• Handle plastic carefully; wear gloves if old parts have sharp edges

Replace a cracked or missing door basket to restore organized, secure storage on your refrigerator door. This bin mounts to the inner door to hold bottles and condiments so items stay put when you open and close the door. What it does:

• Mounts to the door to hold beverages, condiments, and small containers
• Replaces a broken, loose, or missing bin to restore proper fit
• Helps keep items upright and seated on the door tabs when properly installed
• Refreshes the interior appearance with an intact, clean bin

• Includes: 1 refrigerator door basket

• Remove contents, lift the old bin up and off the door mounts
• Align the new basket with the door tabs and press down until fully seated
• Confirm the basket is level and secure before loading items
• Close the door slowly to verify clearance and proper engagement

The Refrigerator Door Shelf is an OEM part for LG refrigerators. It provides additional storage space on the door of the refrigerator, allowing for the organization and easy access of frequently used items such as condiments, beverages, and small containers. It measures approximately 14" x 4" x 4".

Causes of a bad refrigerator door shelf can include general wear and tear from repeated use, overloading the shelf with heavy items, or accidental damage during cleaning or reorganization. Cracks or breakage in the plastic material can also render the shelf unusable.

Symptoms of a bad refrigerator door shelf include:

• Cracked or broken shelf
• Items not staying securely on the shelf
• The shelf not fitting properly into the door brackets
• Difficulty in attaching or removing the shelf

This OEM LG part is also compatible with Sears/Kenmore refrigerators.

This door stopper cushions and limits the appliance door's movement to help prevent slamming, misalignment, and wear. A small replacement part that restores smoother, quieter door operation. What it does:

• Absorbs impact when the door closes to reduce noise and shock
• Keeps the door from over-travel that can cause misalignment or rubbing
• Helps the door latch and seal properly by stabilizing movement
• Stops rattling or binding caused by a worn or broken stopper

• Disconnect power to the appliance before starting any repair
• Access may require opening or removing the door or a trim panel; use basic hand tools
• Remove the old stopper and install the replacement in the same position and orientation

This Door Stopper is the hinge-mounted stop that limits your refrigerator door's swing. Replacing a worn or broken stopper restores smooth, controlled movement and helps protect hinges and nearby cabinetry from overextension. What it does:

• Controls the door opening angle on the hinge to prevent overextending
• Helps maintain door alignment for a reliable seal and smooth closing
• Reduces clunking or clicking at the hinge caused by a worn stop
• Replace if the door swings too far, binds, won't close smoothly, or the stopper is cracked/missing

• 1 door stopper

• Disconnect power and support the door to relieve hinge load before service
• Remove hinge cover/fasteners as needed and note the old stopper's orientation
• Install the new stopper on the hinge/bracket, reassemble, and check door travel
• Verify the door seals fully and opens within the normal range

The Lower Refrigerator Door Hinge is an OEM part for LG refrigerators. This hinge supports the refrigerator door, allowing it to open and close smoothly while maintaining proper alignment. It is designed to handle the weight of the door and ensure a secure and stable operation over time.

Causes of a bad lower refrigerator door hinge can include regular wear and tear, physical damage from overloading or impacts, and gradual loosening over time. A faulty hinge can lead to misalignment, difficulty in opening or closing the door, and potential damage to the door seal.

Symptoms of a bad lower refrigerator door hinge include:

• The door not closing properly or staying open
• Sagging or misaligned door
• Unusual noises when opening or closing the door
• Gaps in the door seal, causing cooling inefficiency

This OEM LG part is also compatible with Sears/Kenmore models.

This connector rail secures a wiring harness to the appliance chassis so electrical connections stay stable during normal use. It helps prevent loose plugs and intermittent power at the harness connection. What it does:

• Holds the wiring harness or plug assembly to the appliance rail or frame for a firm connection
• Prevents strain on connectors that can cause intermittent operation or loss of power
• Keeps wires routed and positioned to avoid pinching or rubbing against other parts
• Useful when a loose or wobbly harness plug causes intermittent symptoms

• One connector rail as shown

• Disconnect power to the appliance before beginning any repair
• Remove panels or trim as needed to access the harness rail; keep track of fasteners
• Re-seat the harness fully into the retainer until it clicks or is secure
• If wiring or connectors are damaged, replace the damaged component rather than relying on the retainer alone

This replacement drive gear restores mechanical motion in the appliance's drive assembly so parts rotate or advance smoothly. It's a direct-fit component used where a worn or broken gear prevents normal operation. What it does

• Transfers torque from the motor or drive shaft to the driven components
• Restores proper rotation and timing in the drive train
• Common symptom: loud grinding or clicking from the drive area
• Common symptom: parts failing to advance, rotate, or engage
• Common symptom: visible wear, missing or stripped teeth

• One replacement drive gear

• Disconnect power (and water, if applicable) before servicing
• Use appropriate hand tools and keep track of small fasteners and retaining clips
• Inspect mating shafts and bearings for wear; replace if damaged

Right side rail.

The Rail, Slide is an OEM part for LG refrigerators. These rails are responsible for allowing shelves and drawers to smoothly glide in and out of the refrigerator compartment. They are designed with precise tolerances and durable materials to withstand frequent use while retaining their smooth operation over time. 

Causes of bad rails can include dents, scratches, or damage accumulated from years of use and repeated opening and closing of shelves/drawers. Wear and tear of moving parts can also cause rails to malfunction. 

Symptoms of bad rails include:

• Shelves or drawers that don't slide smoothly
• Items getting stuck or jammed when trying to remove them from the fridge 
• Gapping or misalignment of shelves/drawers in their tracks
• Noisy or grinding sounds coming from rail areas

This OEM LG part is also compatible with Kenmore models.

Replacement wiring harness that connects power and control signals between appliance components to restore reliable electrical connections and reduce intermittent operation, error codes, or complete component loss of power. What it does:

• Routes power and signal wires between control boards, motors, sensors, and other components.
• Restores reliable electrical continuity when a damaged harness causes intermittent operation or no power to a component.
• Can stop symptoms such as appliance not starting, error codes tied to wiring faults, or components that run intermittently.
• Replaces harnesses with visible damage, burned connectors, or broken/loose terminals.

• Disconnect power (and water, if applicable) before attempting any service.
• Inspect connectors and routing; replace damaged clips or grommets to prevent chafing.
• Match connector shapes and pin counts; do not force connectors together.

This ice maker drive gear replaces the small plastic gear that turns the ice tray and advances the ice maker. Restores reliable rotation so the ice maker can harvest and eject ice properly. What it does

• Drives the ice tray/arm assembly so the ice maker can cycle and eject ice.
• Replaces worn or broken gear teeth that cause slipping or grinding.
• Helps stop intermittent or complete failure of the ice maker to produce ice.
• Useful when the ice tray spins slowly, stalls, or makes unusual noises.

• Disconnect power to the appliance before beginning any repair.
• Inspect surrounding gears and the motor shaft for damage; replace additional parts if worn.
• Handle small plastic parts carefully to avoid damaging gear teeth during installation.
• Follow the refrigerator service manual for proper removal and reassembly procedures.

This ice maker gear drives the ejector blades that push ice from the tray into the bin. Replacing a worn or broken gear restores proper harvest cycles and stops grinding or slipping during ejection. What it does:

• Turns the ice maker ejector to release ice cubes during the harvest cycle.
• Stops or reduces grinding noises and slipping when the gear teeth are stripped or damaged.
• Helps restore regular ice production when the ejector no longer rotates.
• Works as the replacement driven gear in compatible LG ice maker gear trains.

• Disconnect power before servicing the ice maker to avoid shock or injury.
• Remove the ice maker assembly to access the gear; follow OEM instructions for disassembly.
• Inspect the mating gear, motor shaft, and ejector assembly for wear—replace additional damaged parts as needed.
• Use the matching part number to ensure fit.

This wiring harness assembly is the factory bundle of wires and connectors that links key components inside your appliance. Replacing a damaged harness restores reliable power/signal paths and brings affected features back to normal operation.

• Distributes power and control signals between control boards, sensors, motors, heaters, valves, and lights per the original design
• Helps address symptoms such as a component not operating, intermittent or dead functions, error codes, or visible burned/melted connectors
• Replaces broken, pinched, shorted, or corroded wiring that can interrupt circuits
• OEM-style connectors and lengths support proper plug-in fit and correct routing

• Disconnect power before servicing; do not rely on the appliance's power button
• Photograph/label each connection and note the original wire routing before removal
• Route the new harness exactly along the original path and secure in clips to prevent pinching, chafing, or heat contact
• Fully seat connectors; avoid pulling on wires when disconnecting or installing

This lower door hinge assembly supports and pivots the appliance door for smooth opening and reliable closing. Replacing a worn or damaged lower hinge restores proper door alignment and sealing. What it does:

• Provides the pivot point for the bottom of the door so it opens and closes correctly
• Stabilizes door alignment to prevent sagging or uneven gaps
• Helps maintain a consistent seal to preserve internal temperature
• Stops grinding, scraping, or noisy hinge movement when worn

• One lower hinge assembly

• Disconnect power and remove contents as needed; support the door before removing the hinge
• Remove mounting fasteners and transfer any pins or bushings if they remain reusable; install the new hinge in the original orientation
• Reinstall and tighten mounting fasteners, then check door alignment and operation; adjust as needed
• If the door is heavy, have a second person assist to avoid injury or damage

This turntable roller ring sits under the glass tray and allows it to rotate smoothly for even heating. Replace a worn, warped, or broken ring to restore stable rotation and consistent cooking performance.

• Supports the glass turntable and rides on built-in rollers for smooth, quiet movement
• Keeps the tray level and centered to promote even heating
• Common symptoms: tray not turning, uneven cooking, scraping/grinding noises, or a wobbly/slipping turntable
• Restores proper interaction between the turntable, drive coupling, and motor

• Unplug the microwave or switch off the breaker before servicing
• Remove the glass tray; lift out the old ring and clean the track
• Place the new ring with the rollers facing down on the track; reseat the tray on the center drive coupling
• Test rotation with a microwave-safe cup of water

The Spanner Wrench is an OEM replacement part for LG refrigerators. This tool allows you to adjust the door hinges to ensure the doors are level and aligned properly. A well-aligned door is crucial for maintaining the internal temperature and efficiency of the refrigerator, preventing energy loss and ensuring food is stored under optimal conditions.

Symptoms that you might need to adjust the door hinges and potentially need this wrench include:

• Doors not closing properly or sealing tightly
• Visible gaps between the door and the main body of the refrigerator
• The refrigerator tilting or not sitting level

This spanner wrench is also compatible with some Sears/Kenmore refrigerators. 

This upper hinge assembly secures and guides the appliance door at the top, restoring correct door alignment and smooth opening. Replace a worn or damaged hinge to stop door sagging and improve sealing and operation. What it does:

• Supports the top of the door and keeps it aligned on the cabinet
• Allows the door to pivot smoothly during opening and closing
• Prevents or corrects door sag, rubbing, or uneven gaps that can affect sealing
• Stops grinding, squeaking, or binding caused by a damaged hinge

• One upper hinge assembly

• Unplug the appliance or disconnect power before starting work
• Support the door while removing and installing the hinge to prevent dropping or injury
• Use basic hand tools; follow the appliance service manual for torque and alignment steps

This upper hinge assembly secures and allows the refrigerator door to pivot smoothly, restoring proper door alignment and sealing. It replaces worn or damaged upper hinge hardware to stop sagging or uneven door movement. What it does:

• Supports the top of the refrigerator door and provides the pivot point for opening and closing
• Restores proper door alignment and helps the door form a tight seal when closed
• Stops symptoms such as a sagging or tilted door, door rubbing, or uneven movement
• Durable metal/plastic construction resists wear from regular use

• One upper hinge assembly

• Unplug the appliance or disconnect power before starting work
• Support the door before removing the hinge to prevent it from falling
• Reuse any original screws/fasteners only if undamaged; replace damaged fasteners

The Ice Dispenser Door Assembly is an OEM part for LG refrigerators. This assembly includes the door and the necessary components that control the opening and closing of the ice dispenser chute. It plays a vital role in maintaining the efficiency of the ice dispensing system by ensuring that the ice chute remains sealed when not in use, preventing warm air from entering the freezer compartment.

Causes of a bad ice dispenser door assembly can include wear and tear from frequent use, damage from ice buildup, or issues with the mechanical or electronic components that control the door.

Symptoms of a bad ice dispenser door assembly include:

• Ice dispenser door not opening or closing properly
• Frost or ice buildup around the ice chute
• Warm air leaking into the freezer, affecting its temperature
• The ice dispenser not functioning efficiently

This OEM LG part is also compatible with Sears/Kenmore.

This lever holder is the replacement mounting bracket that secures the door lever so the microwave door operates smoothly and reliably. It restores proper lever alignment to help the door latch and release as intended. What it does:

• Secures the door lever assembly so the door can latch and release properly
• Keeps the lever aligned to prevent binding, sticking, or loose movement
• Helps restore normal door operation and user access to the oven cavity
• Common symptom: door feels loose, lever moves freely, or door will not latch

• Disconnect power before beginning any repair to avoid shock or injury
• Remove the outer cabinet or door trim only as needed to access the lever area
• Handle door components and glass carefully to avoid damage or injury

This holder bracket replaces a damaged or missing mounting support. It secures an internal component so it stays aligned and stable, helping your appliance operate smoothly without looseness or rattling.

• Provides a rigid mounting point to hold a component or assembly in place
• Maintains alignment to reduce vibration, rubbing, and intermittent operation
• Restores support when the original bracket is cracked, warped, or missing
• Common symptoms include a loose/wobbly part, rattling noises, or visible broken tabs

• Disconnect power to the appliance before servicing
• Note the original bracket's orientation and transfer any clips or screws from the old part
• Use existing hardware and tighten fasteners evenly—do not overtighten
• Verify proper fit and alignment before restoring power

The Right Ice Door Spring is an OEM part for LG refrigerators. This part provides the necessary tension to ensure the ice door opens and closes smoothly, maintaining the seal to keep the ice compartment cold and efficient.

Causes of a bad ice door spring can include wear and tear over time, loss of tension due to repeated use, or physical damage from accidental mishandling.

Symptoms of a bad Right Ice Door Spring include:

• Ice door not staying closed
• Difficulty in opening or closing the ice door
• Unusual noises when the ice door operates
• Increased frost buildup around the ice compartment

This OEM LG part is also compatible with some Kenmore models.

The Dispenser Lever Retainer is an OEM part for LG refrigerators. This part secures the dispenser lever in place, this part ensures the smooth operation of the water and ice dispenser. 

Causes of a bad Dispenser Lever Retainer can include normal wear and tear from repeated use, accidental damage, or deterioration of the material over time.  

Symptoms of a bad Dispenser Lever Retainer include:

• The dispenser lever is loose or wobbly
• Difficulty in dispensing water or ice
• The lever does not return to its original position after use
• Unintended activation or difficulty in activating the dispenser

This OEM LG part is also compatible with some Kenmore models.

The Left Ice Door Spring is an OEM part for LG refrigerators. It is responsible for providing the necessary tension to ensure the ice door closes properly after dispensing ice. This spring helps maintain an airtight seal, preventing warm air from entering the ice compartment and ensuring efficient operation of the ice maker.

Over time, the ice door spring can become worn out, lose tension, or break due to repeated use or accidental damage. A faulty spring can result in the ice door not closing correctly, which can lead to issues with ice production and storage.

Symptoms of a bad left ice door spring include:

• The ice door not closing or sealing properly
• Warm air entering the ice compartment
• Excessive frost buildup around the ice dispenser
• The ice door feeling loose or not springing back into place

This OEM LG part is also compatible with Sears/Kenmore models.

This replacement funnel channels flow cleanly through the dispenser/fill area, guiding it into the correct passage to help prevent spills, drips, and messes when the original piece is cracked, warped, or missing.

• Guides flow into the correct passage within the dispenser or fill area
• Helps reduce drips, leaks, and misdirected flow caused by damage or wear
• Restores clean, accurate dispensing and a tidy appearance
• Common symptoms include leaking/dripping at the dispenser, misdirected stream, visible cracks, or a loose/missing funnel

• Disconnect power; shut off water supply if applicable
• Remove surrounding trim or fasteners carefully and retain hardware for reuse
• Clean the mounting area before installing the new funnel
• Ensure tabs/locks fully seat; secure fit before restoring power and water

The Ice Dispenser Door Lever is an OEM part for LG refrigerators. This part is responsible for operating the ice dispenser door, allowing ice to be dispensed from the ice maker when the lever is pressed.

Causes of a bad part can include mechanical wear and tear from repeated use, physical damage or impact, or issues with the internal mechanisms that control the lever's motion.

Symptoms of a bad Ice Dispenser Door Lever include:

• Failure of the ice dispenser door to open when the lever is pressed
• The door opening erratically or becoming stuck
• Difficulty in dispensing ice due to the improper operation of the door

This OEM LG part is also compatible with some Kenmore models.

This button assembly replaces a worn or unresponsive control panel button to restore reliable tactile input and control responsiveness. It's a direct-fit replacement designed to match the original button shape and feel. What it does:

• Replaces a damaged or stuck control panel button so you can select cycles and settings as intended
• Restores tactile feedback when pressing the front panel controls
• Helps eliminate intermittent or unregistered button presses that affect normal operation
• Designed to fit into the existing control panel and interface with the original switch mechanism

• One button assembly

• Disconnect power (unplug or shut off breaker) before starting any repair to avoid shock
• Access may require removing the control panel or console; refer to your model's service manual for panel removal steps
• Handle fragile plastic tabs and electrical connectors carefully to avoid breakage

This button assembly replaces a damaged or unresponsive control-panel button cluster to restore reliable button operation and user control. It fits into the appliance's front control panel and connects to the main control board. What it does:

• Replaces cracked, worn, or missing control-panel buttons
• Restores button responsiveness and reliable input to the control board
• Helps resolve symptoms like sticking, intermittent, or non-working buttons
• Maintains the original panel layout and tactile feedback

• Disconnect power (unplug appliance or switch off breaker) before beginning
• Access may require removing the control-panel trim or console—keep fasteners organized
• Handle the assembly carefully to avoid damage to the button contacts or wiring
• Test button function before reassembling the entire console

The Cover Assembly, Display is an OEM replacement part for LG refrigerators. As the interactive interface between the user and refrigerator, the display cover assembly aids the navigation of settings and provides important information such as temperature readings, alarms, and cycle statuses.

Causes of a bad display cover assembly can include cracks, scratches or damage to the tough material from accidental impacts over time. The thin film coatings and integrated circuit boards are also susceptible to faults and malfunction.

Symptoms of a bad display cover assembly include:

• Unresponsive or glitchy touch controls  
• Faulty or inaccurate temperature displays
• Inoperative dispensing functions
• Blind spots or discoloration on the screen

This OEM LG part is also compatible with select Sears/Kenmore models

The Water Dispenser Button is an OEM part for LG refrigerators. This part allows users to easily dispense water with a simple press. It's directly connected to the electronic control system of the refrigerator, ensuring that when pressed, it signals the refrigerator to activate the water dispenser. 

Causes of damage to the Water Dispenser Button often involve repeated use, which can wear down the mechanical components, or impact damage from objects hitting the button.  

Symptoms of a bad Water Dispenser Button include:

• The button sticking or failing to spring back after being pressed.
• No water being dispensed when the button is pressed, indicating a possible fault in the signal transmission to the control system.
• The button feeling loose or falling off, suggesting that the mounting or connecting components may be damaged.

This OEM LG part is also compatible with some Kenmore models.

NOTE: This part also requires software update kit CJT30000002. DO NOT INSTALL WITHOUT UPDATING SOFTWARE. Call for more information.

The Compressor is an OEM part for LG refrigerators. As the primary component that circulates refrigerant to chill the refrigerator and freezer compartments, it is crucial for proper cooling operation. The compressor works with the condenser fan and evaporator coil to regulate temperatures inside the refrigerator. 

Causes of a faulty compressor can include gradual breakdown of motor windings, loss of refrigerant pressure over time, or failure of electrical components vital to operation.

Symptoms of a bad compressor are:  

• Elevated fridge/freezer temperatures unable to be maintained
• Frost patterns indicating poor or insufficient cooling 
• Abnormal vibrations or sounds upon compressor cycling
• Error codes displayed regarding cooling performance

It is also compatible with Sears/Kenmore refrigerator models.  
 

This evaporator assembly circulates refrigerant to absorb heat from the refrigerator/freezer compartment so your appliance can maintain cold temperatures. It restores the core cooling surface that removes heat and supports frost control. What it does:

• Provides the evaporator coil surface where refrigerant absorbs heat from the cabinet air
• Works with the evaporator fan and defrost system to maintain proper cooling and help prevent excessive frost buildup
• Commonly used when the evaporator is corroded, leaking, or severely iced-over and no longer cooling effectively
• Supports overall system cooling performance

• One evaporator assembly

• Disconnect power before starting any repair to avoid shock or injury
• Allow the system to fully defrost and dry before removing or replacing the assembly
• Inspect surrounding insulation, gaskets, and mounting hardware and replace if damaged

This evaporator assembly replaces the freezer evaporator coil and housing to restore proper cold-air circulation and frost control in the freezer compartment. It helps re-establish normal cooling and defrost performance when the evaporator is damaged or leaking. What it does:

• Contains the evaporator coil and housing that absorb heat from the freezer compartment
• Enables proper airflow and heat transfer for consistent freezer temperatures
• Restores defrost cycle effectiveness when a cracked or corroded evaporator causes frost build-up
• Addresses symptoms like excessive frost/ice on the coil, reduced cooling, or water leaking inside the freezer

• Disconnect power to the appliance before starting any repair; follow manufacturer safety instructions
• Replacement typically requires removing interior liners and thawing any ice; handle fins and tubing carefully to avoid damage
• Use proper sealing/insulation when reinstalling the housing to prevent air leaks and frost issues

The HARNESS ASSEMBLY is an OEM part for LG refrigerators. It is a collection of wires bundled together into a single integrated unit, electrically connecting major fridge components like lights, temperature controls, and more. A properly functioning harness is vital for signal transmission throughout the appliance.

Causes of a bad harness assembly can include wear-and-tear damage from repeated door openings, exposed wires snagging on other parts, or potential water damage degrading insulation qualities over time. 

Symptoms of a bad harness assembly include:

• Lights, temperature controls, or other features failing to work properly  
• Intermittent or unreliable operation of connected components
• Loose or disconnected wires that may cause electrical issues
• Error codes related to sensor or control board failures

This part is also compatible with Sears/Kenmore models.

A small retaining pin used to secure moving parts and keep components aligned for smooth operation. Replacing a worn or broken common pin can stop rattling and restore proper fit between linked parts. What it does:

• Holds or aligns two parts together so they move correctly and stay in position
• Helps prevent rattling, looseness, or parts slipping out of place
• Works as a simple mechanical fastener—no electronics involved

• One common pin

• Disconnect power to the appliance before beginning any service
• Keep track of small parts; lay out components in order to aid reassembly
• May require removal of trim or a hinge/retainer to access the pin—use basic hand tools
• If the pin is difficult to seat, do not force; inspect mating parts for damage

This cabinet roller supports the refrigerator and lets the unit roll in and out of place for cleaning or service. Replace a worn or broken roller to restore smooth movement and help keep the appliance properly positioned.

• Supports the base of the refrigerator and enables rolling movement
• Helps with safe positioning and service access without dragging
• Common failure signs: appliance is hard to move, scraping or rolling noises, a flat-spotted/cracked wheel, or a wheel that won't turn
• Replace when the roller is damaged, seized, or missing

• Disconnect power and shut off water supply; protect flooring before moving the appliance
• With help, pull the refrigerator forward and safely support it to access the roller
• Remove mounting fasteners, install the new roller, and reuse original hardware
• Confirm level and smooth movement before returning the unit to its location

This compressor damper is a vibration-isolating mount that sits between the sealed-system compressor and the chassis. It cushions the compressor to reduce noise, limit vibration transfer, and help keep refrigerant lines from being stressed.

• Isolates the compressor from the frame to absorb start/stop shock and vibration
• Helps reduce humming, rattling, or buzzing from the back/bottom of the appliance
• Replaces a damper that's cracked, flattened, hardened, or missing
• Can help if the compressor rocks or the unit vibrates excessively

• Disconnect power and pull the unit forward for access; remove rear/service panel if present
• Support the compressor to relieve load on the mounts before removing fasteners
• Match orientation; transfer any sleeves/spacers from the old damper to the new one
• Ensure the compressor sits level and that tubing is not strained before restoring power