Lawn Mower Gasket & Seal

This cylinder head gasket is an original OEM part sourced directly from the manufacturer, Tecumseh. It is sold individually. A cylinder head gasket is an important piece of hardware designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as a lawn mower, a snow blower, a generator, and a wood chipper. It is compatible with products by brands such as Briggs & Stratton, Craftsman, Toro, Tecumseh, and Simplicity.The cylinder head gasket part is crucial because it serves as the seal between the engine block and cylinder head or heads. Its purpose is to seal the combustion gases within the cylinders, thereby avoiding leaking of coolant or engine oil into the cylinders. Leaks in the head gasket can be problematic because they prevent the engine from running properly and often lead to overheating.The replacement or repair process of the cylinder head gasket should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

This breather gasket is made of durable but flexible plastic, designed to seal the cylinder block and the breather body. A breather is a pipe that enables internal combustion in the engine to properly vent any crankcase pressure out of the engine. It is essentially a venting pipe or system and ensures that the engine's piston rings seal tighter against the cylinder walls (however many there are in that engine). When this gasket dries out, that pressure and seal cannot be created effectively and the engine may malfunction. Replacing the breather gasket means using a wrench to disassemble the breather, clean the surfaces, remove the original gasket, and use this authentic replacement part before reassembling This is an OEM replacement part designed for Toro, Tecumseh, Lawn-Boy, MTD, and Husqvarna equipment, including snowblowers and other small engine systems. This item ships individually.

This head gasket is designed for use in the engine of lawnmowers and snow blowers. It is created to separate the engine block from the cylinder head and acts as a regulator to keep the mower in good working order. The head gasket prevents oil and coolant from mixing together by sealing in the internal combustion process. If the seals of the gasket weaken or the gasket head blows, the lawn and garden tool will no longer operate at the appropriate power level. Having low engine power in a lawnmower or snow blower is one indication that the head gasket is damaged or no longer working. This can be caused by lack of maintenance, wear and tear, worn seals, or insufficient amounts of oil. A compression test will need to be done to determine whether this is the problem. If the head gasket has a crack, loose bolts, or compromised seals, it will need to be replaced. This head gasket is designed for use with engines, lawnmowers, and snow blowers manufactured by Husqvarna, Tecumseh, Craftsman, and Toro. This is an individual genuine OEM component that comes directly from the manufacturer.

This is an authentic oil pan gasket replacement that has been sourced from the manufacturer. It can be used with many types of lawn and garden machines. The gasket is used as a means to help seal the oil pan to the bottom of the engine block. This helps to ensure that there is no oil leakage when the oil moves back and forth from the pan to the engine. Oil leaks are a major sign of a problematic oil pan gasket. Although the gaskets are made from quality material, they will need to be replaced on occasion. Over time, the gaskets can start to stretch or wear thin. They may start to dry out or crack and break away. This would allow for oil leaks to start. Small leaks could start to degrade the gasket further. The gasket should be replaced whenever the owner is performing maintenance on the machine and changing out the oil and the oil filter. The genuine OEM oil pan gasket is sold individually. It can be used with more than 150 models of snowblowers, generators, wood chippers, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Tecumseh, Lawn-Boy, and MTD.

This is a replacement crankcase gasket that can be used for a range of outdoor power equipment and small engines including lawn mowers. The crankcase gasket helps to provide a seal between the crankcase and the crankcase cover. It will help to ensure that there are no oil leaks, which could cause performance problems with the engine. The crankcase gasket should be checked on when owners do regular maintenance to their machines. The gaskets can start to have problems the longer they are used. They can start to dry out and crack, and they may even break. These kinds of issues could then cause an oil leak. This not only causes a mess, but it will waste oil. The replacement is relatively easy to perform. The crankcase gasket is made from durable material, and it is a genuine OEM part right from the manufacturer. It can be used with many types of small engines including those found on pressure washers and lawn mowers. Brands with compatible models include Tecumseh, Lawn-Boy, Toro, and Briggs & Stratton.

This replacement cylinder head gasket is a genuine part manufactured by Tecumseh for use in select lawn and garden engines. The cylinder head gasket is designed to fit between the cylinder head and the crankcase, sealing the flow of air and fuel through the engine and preventing oil from getting into the fuel. The gasket is exposed to high heat and constant pressure and will become brittle and worn over time. This could affect the seal and lead to bigger problems, so an immediate replacement is necessary. This OEM cylinder head gasket is manufactured to exact standards by Tecumseh and can be used in select models from the brand, as well as those from Toro and Lawn-Boy. The gasket fits certain models of pressure washers, lawnmowers, and chippers. It is sold as an individual unit and doesn't include any hardware or accessories. Replacing the cylinder head gasket should only be done when the engine is cool. Wear gloves and work in a well-ventilated space when doing this kind of work for safety. When replacing gaskets, always use care with the new part so that it doesn't get broken or damaged during installation.

This genuine OEM intake manifold gasket is found on lawnmowers, snowblowers, and other lawn and garden equipment. The intake manifold gasket protects the carburetor from debris and containments that would affect the engine performance. If the engine misfires, surges, won't start, or is running hot; the intake manifold gasket could be causing the problem. Normal wear and tear can cause the gasket to tear or have debris buildup and need to be replaced.The manifold intake gaskets need to be inspected and replaced on a regular basis even when there is not an engine issue. If the motor is misfiring or overheating, the intake manifold gasket is one place to check. Empty the fuel tank and make sure there is no fuel in the carburetor. Disconnect the spark plug and remove it from the engine. Make repairs in a well-ventilated area. Remove the old gasket and clean the area to ensure a tight fit when the new ones are installed. This manifold intake gasket is sourced directly from the manufacturer and sold as an individual part. It is compatible with lawnmowers, snowblowers, tillers, and pressure washers manufactured by Craftsman, Toro, and Tecumseh.