Need Help?
Call or text
Show parts
Replacement gas tubing for gas ranges. Routes natural or propane gas between range components. Replaces worn, damaged, or cracked tubing. Direct-fit.
Secures and aligns small components inside your gas range. Replace this retainer if the original is cracked, broken, or missing to prevent rattling.
Replace a cracked, damaged, or missing burner holder on your gas range. This structural part secures the burner assembly in place on the cooktop.
Mounting clip that secures ORF assembly and trim panels on gas ranges. Replaces worn, broken, or missing clips to restore proper fit and eliminate rattling.
Replaces cracked, broken, or missing holder retainer in your gas range. Secures and positions internal components for reliable operation and alignment.
If your gas range burner has weak flames or uneven heating, the orifice holder may be damaged. This part secures the gas orifice valve for proper flow.
Gas smell when burner is off? A faulty valve solenoid may be causing gas to leak. This part controls gas flow to burners. Moderate DIY repair.
Fix an oven that won't ignite or maintain temperature with a new gas valve. Controls gas flow to bake and broil burners. Moderate DIY repair.
Fix intermittent power loss, electrical shorts, or component failures in your range. This wire harness assembly restores electrical connections between parts.
Oven won't heat or takes too long to preheat? This gas range igniter creates the spark to light your burner. Common fix for worn metallic coils.
The Manifold is an OEM component for Whirlpool gas ranges. It serves as the main conduit routing gas from the supply line to each burner via individual brass valves. Rugged steel construction ensures durability under appliance pressures and heat.
Causes of a bad manifold can include cracks in welding, damage to gas valves preventing proper flow control, or corrosion from prolonged gas exposure compromising safety.
Symptoms of a bad manifold include:
This OEM Whirlpool replacement part is compatible with kitchen ranges from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore models. Replacing the manifold restores optimal gas flow and functionality.
Burner won't light or flame is too high/low? This gas range burner valve controls fuel flow to restore proper flame height and consistent heat output.
Fix weak or uneven flames on your gas range with a new burner valve. Controls gas flow to each burner for consistent heat. Moderate DIY repair.
Fix a burner that won't ignite, has weak flames, or won't turn off with this gas range burner valve. Moderate DIY repair typically takes 30-45 minutes.
Hand-tighten wing nut secures panels, brackets, and components in ranges and ovens for tool-free adjustment. Replace when lost, stripped, or broken.
Usually ships within 4 - 14 days
Oven not broiling or browning food evenly? This broil burner restores high, direct heat for proper broiling. Straightforward repair for most DIYers.
Oven won't heat or bakes unevenly? This bake burner restores the main flame in gas ovens for reliable baking temperatures. Easy DIY installation.
Supplies gas from manifold to burner assembly. Replace if cracked, corroded, kinked, or leaking to restore safe fuel delivery to your gas range burners.
Replacement gas tubing for ranges. Installs between gas components to restore secure fuel routing. Needed when original tubing is cracked, corroded, or leaking.
Oven won't heat or stays at 100°? A weak igniter fails to light the gas. This gas range igniter typically takes 45 minutes to replace with basic tools.
Heat shield for gas ranges. Protects internal components from heat damage. Replace if cracked, warped, or missing to maintain proper insulation.
Connects the water supply line to your range's internal plumbing. Replace if cracked, leaking, or damaged to restore a secure watertight seal.
Secures the gas orifice to the burner valve assembly on gas ranges. Replace if worn, stripped, or damaged to restore proper orifice positioning.
Secures panels, brackets, and trim pieces on ranges and cooktops. Replace if stripped, corroded, or missing to eliminate rattles and looseness.
Burner baffle that sits under the burner cap on your gas range cooktop. Replace if cracked, damaged, or missing to restore proper burner appearance.
Burner baffle directs heat and flame away from sensitive components on your gas range. Replace if cracked, warped, or missing to protect internal parts.
If your gas burner won't light or sparks weakly, corroded igniter screws may be the cause. These mounting screws secure the igniter to the burner assembly.
If you smell gas or notice weak flames, this gas supply tubing restores safe fuel flow from inlet to burner. Replaces corroded or damaged lines.
Replacement mounting screw for washer drum baffles. Secures baffles to drum interior. Order if original screw is stripped, lost, or corroded during repair.
Fix gas leaks or weak flames with this range gas tubing. Routes fuel from valve to burner assembly. Moderate DIY repair restores safe gas flow.
Gas range won't light or clicking but not igniting? This igniter creates the spark to light your burners. Common fix for burner ignition issues.
Fix continuous clicking or no-ignite issues on gas range burners. This spark module controls ignition timing and generates sparks to light surface burners.
Replacement mounting screw for ranges and ovens. Secures panels, brackets, and internal components. Order a new screw if yours is stripped or missing.
Replacement mounting screw for securing handles, panels, and internal components. Needed when original screws are stripped, lost, or broken during repairs.
Fix burners that won't light or have weak spark with this surface ignitor electrode. Creates the spark needed to ignite gas burners reliably.
Burner not igniting or clicking but not lighting? This gas range surface igniter creates the spark to ignite gas burners. Common DIY repair.
Fastening screw for securing components inside appliances. Replaces lost, stripped, or damaged screws during repairs or part installations.
Fix uneven flames or poor ignition with this gas range burner orifice spud. Secures the gas orifice in the burner tube for consistent fuel flow.
Gas range burner won't light or flame is uneven? A damaged orifice spud may be blocking gas flow. This fitting directs fuel to the burner for safe cooking.
Fix weak flames or ignition issues with this burner orifice spud. Restores proper gas flow from valve to burner for even cooking. DIY-friendly repair.
Weak or uneven flames? This burner orifice holder secures the gas orifice in place for stable ignition and consistent heat across all burners.
Secures the burner orifice to the gas valve and directs fuel flow to the burner. Replace if damaged, corroded, or stripped to restore proper fit.