Parts for Ge PVM9215DK2WW: Oven Cavity Parts

Bottom base panel for microwaves and microwave/hood combos. Replaces cracked, warped, or missing base panels. Structural support component.

A replacement bottom lamp bracket that secures the refrigerator light assembly so the bulb and socket stay properly positioned. Restores a stable lamp mount for reliable interior lighting. What it does:

• Holds the lamp housing or socket at the bottom of the compartment so the bulb stays aligned
• Prevents the light assembly from shifting or rattling when the door opens and closes
• Helps ensure the bulb makes proper contact with the socket for consistent illumination
• Useful when the original bracket is cracked, broken, or missing

• Disconnect power to the appliance before servicing to avoid electrical shock
• Remove the bulb and any trim panels needed to access the bracket
• Replace bracket using existing screws or clips; do not overtighten fasteners
• If the light still fails after bracket replacement, inspect the bulb and socket for damage

Glass light cover for microwave cooktop lights. Shields and diffuses bulb from heat, grease, and splatter. Replace if cracked, broken, or missing.

Replacement glass lens cover for microwave interior or cooktop lights. Protects bulb from food splatters. Needed when cracked, broken, or shattered.

This halogen lamp socket provides a safe connection point for the oven/stove halogen light, restoring interior illumination for cooking and inspection. It secures the lamp and transfers power so the bulb can operate reliably. What it does:

• Holds the halogen bulb and provides the electrical contacts needed for the lamp to light
• Restores oven interior light when the old socket is burnt, loose, or corroded
• Helps stop intermittent lighting and flicker caused by poor contacts
• Compatible with in-oven halogen style lamps that use a matching socket connection

• One halogen lamp socket

• Disconnect power to the appliance at the breaker before servicing to avoid shock
• Allow the appliance and bulb to cool completely before touching the socket or lamp
• Inspect wiring and connectors; replace damaged wiring per manufacturer guidance
• After installing, restore power and confirm the lamp operates; use only the specified bulb type and wattage

This spring blade is a small metal tension spring that restores proper tension and movement in the appliance's linkage or latch assembly. It replaces worn or broken blades to help restore normal door or component action. What it does:

• Provides tension and return force in linkage, latch or lever assemblies
• Helps stop sagging, slipping or loose movement in the affected mechanism
• Can reduce related rattling or binding caused by a worn spring blade
• Restores reliable engagement where a broken or fatigued blade allowed failure

• Unplug the appliance or shut off power before starting any repair
• Verify orientation and engagement of the blade before final assembly
• Use proper hand tools; the blade may be under tension—wear safety goggles and gloves
• If the assembly uses multiple springs, replace all worn parts to ensure balanced function

Base plate for microwave ovens. Mounts at the bottom of the unit to provide structural support. Replace if cracked, warped, or damaged during installation.

Microwave stopped working or won't turn on? A faulty thermostat often causes complete power failure. This repair typically takes 20-30 minutes with basic tools.

Fix a microwave that stopped heating or made a loud noise. This high voltage transformer powers the magnetron. Moderate DIY repair for experienced users.

Wire holder clip secures internal wiring in your microwave. Replace if wires are loose or rattling. Verify fit with your model number before ordering.

Fix uneven cooking or loud fan noise with this convection fan motor. Restores proper heat circulation in your microwave for consistent results.

Fixes microwaves with no power or that stop mid-cycle. This thermostat switch monitors temperature and protects against overheating. Simple repair.

Microwave not heating? The magnetron generates the microwaves that heat food. Common repair for units that run but don't warm. DIY-friendly repair.

Support plate that mounts and secures the power control module inside your microwave. Replace if cracked, broken, or missing to properly hold the control board.

If your microwave won't power on or has intermittent electrical issues, a damaged power cord may be the cause. This replacement cord restores safe operation.

Microwave won't heat food? The magnetron thermal cut-off prevents overheating damage. This safety component stops the magnetron when temperatures get too high.

Fixes microwaves with motors that start slowly or make abnormal noise. This run capacitor stores electrical energy to help motors start and run smoothly.

Microwave turntable not turning? The turntable motor rotates the glass tray for even heating. Simple DIY repair with basic tools in under an hour.

Microwave won't heat or shuts off randomly? This thermostat regulates temperature and prevents overheating. Direct replacement part for most models.

If your microwave runs with the door open or won't start when closed, this door latch body holds interlock switches in position for safe operation.

Replacement door latch lever bracket for microwaves. Installs behind the control panel to hold interlock switches. Needed when bracket is cracked or broken.

Microwave won't start or heat but light works and timer counts down? A faulty monitor switch is often the cause. DIY repair typically under 30 minutes.

Microwave won't stop running or starts when door closes? A faulty door switch is likely the cause. This safety switch is a 45-minute DIY fix.

Mounting bracket for microwave ovens. Secures the unit to the wall or cabinet. Replace if bent, broken, or missing during installation or repair.

Fix a microwave that won't heat or hums but doesn't start. This capacitor stores energy for the high-voltage circuit. Moderate DIY repair, 30-60 minutes.

Microwave not heating or humming loudly? The high-voltage diode converts AC to DC for the magnetron. Repair takes 30-45 minutes with basic tools.

If your microwave vent fan isn't working or is noisy, this ventilation motor restores proper airflow. Replaces a worn or failed fan motor assembly.

Rear exhaust duct for over-the-range microwaves. Directs air from the microwave to the outside vent. Replace if cracked, damaged, or missing.

Fix a wobbling or scraping microwave tray with a new turntable roller ring. Supports the glass tray for smooth rotation and even heating. Easy DIY fix.

Replacement glass turntable tray for microwaves. Rotates during cooking to heat food evenly. Order a new tray if yours is cracked, chipped, or broken.

Secures microwave to wall cabinet mounting bracket. Replace if cracked, stripped, or missing to restore proper cabinet installation and stability.

Microwave stirrer blade distributes heat evenly during cooking. Replace if food heats unevenly or blade is damaged. Verify fit with your model number.

Stirrer blade holder for microwave ovens. Mounts inside the cavity to secure the waveguide stirrer fan. Replace if cracked, broken, or missing.

Fix poor venting or back-drafts in your over-the-range microwave with this hood damper assembly. Opens for exhaust airflow, closes to block drafts.

Fix uneven heating in your microwave with this stirrer cover. Protects the stirrer assembly and ensures consistent cooking results. Easy DIY install.

Connects the turntable motor to the glass tray in your microwave. Replace if cracked, broken, or worn to restore smooth rotation and prevent slipping.

Protective cover that shields the control assembly and internal wiring from dust and debris. Replace if cracked, broken, or missing to protect components.

Filters grease, smoke, and odors from your microwave's ventilation system. Replace when clogged or every 6 months. Confirm fit with your model number.

Vent air guide for microwaves and microwave/hood combos. Directs airflow through the ventilation system. Replace if cracked, broken, or missing.

Microwave not working or displays flickering? This wire harness restores electrical connections between control and components. Moderate DIY repair.

Secures the temperature sensor in your microwave. Replace if sensor is loose, misaligned, or causing erratic heating. Confirm fit with your model number.

Fix sensor cook cycles that won't adjust properly or show sensor errors. This humidity sensor monitors moisture levels for automatic cooking adjustments.

Microwave lamp socket holds the interior bulb. Replace if the light flickers, doesn't turn on, or shows burn marks. Confirm fit with your model number.

Replace burned-out halogen bulbs to restore bright interior or cooktop lighting. Essential when lights flicker, dim, or stop working. Verify fit with your model.

Secures microwave components and mounting brackets. Replace this hardware assembly if screws are stripped, bolts are missing, or fasteners are damaged.

Rear wall mounting plate bracket that supports over-the-range microwaves during installation. Replace if bent, broken, or missing for secure wall mount.

Charcoal filter removes smoke, odors, and grease in over-the-range microwaves with recirculating vents. Replace every 6-12 months for optimal performance.

White vent grille for over-the-range microwaves. Replaces damaged, cracked, or discolored front grilles. Installs over the exhaust vent opening.

Microwave won't turn on or is completely dead? A blown fuse is often the cause. This safety fuse protects against power surges. Easy 5-minute DIY fix.