Kenmore Washer Dryer Combo 110.94972300 (11094972300, 110 94972300) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10145155
Secures suspension springs to the washer tub assembly. Replace if cracked, worn, or missing to prevent tub instability during wash and spin cycles.
Do-It-Yourself Stories from Customers like You
Tub out of alignment violent wobbling during spin cycle Stephani W. • Folsom , CA • January 29, 2018
When I removed the cabinet, all of the springs appeared in tact, I had already replaced the counter balance spring so I knew that was not the issue. None of the suspension springs or brackets were broken but they did look worn/rusty so I replaced all of the brackets (2 in front and 1 large in back), all of the suspension spring retainers, and all of the suspension springs and it fixed the issue! I plan to also replace the Self leveling leg spring which is an easy fix since it's on the back of...
Read more
More
$6.95
- Compare At:
-
$8.20
- You Save:
-
$1.25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3355458
Fix a washer that won't drain, spin, or stops mid-cycle. This lid switch is a common fix for stackable laundry centers. DIY repair in 20-60 minutes.
Do-It-Yourself Stories from Customers like You
My whirlpool thin twin washer would fill and agitate and then stop without emptying or spinning John Z. • St. Charles , MO • August 01, 2014
I did some online research at this website and others and decided that the lid switch was bad. I checked the local appliance parts suppliers and they were all higher than APP and no one had it in stock. When I ordered the lid switch from APP at a big savings even with shipping, I received it the next afternoon and could have had it earlier if I had not been at the end of the drivers route. I received it in 27 hours. The whole job took less than an hour and it fixed the problem. I can't...
Read more
More
$45.95
- Compare At:
-
$54.68
- You Save:
-
$8.73
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3360977
Washer slowly filling or dripping when off? A faulty vacuum break allows water to siphon back into the drum. Takes 30 minutes with our video guide.
Do-It-Yourself Stories from Customers like You
My washer was rotting away Robert L. • Fulton , NY • October 04, 2014
My 15 year old whirlpool washer top was rotting away and my wife was about to buy a new one. a 1 min search on google brought me to this site and within 5 mins found all the parts I needed, Received my order in 3 days and now we're back in business for a total cost of $159 instead of $500 to $600. Will use this site again and have told a few people already.
Thanks
Rob
Read more
More
$46.95
- Compare At:
-
$55.40
- You Save:
-
$8.45
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8546127
Secures the drain pump to the motor in direct drive washers. Replace if cracked, broken, bent, or missing to properly mount the pump and prevent misalignment.
Do-It-Yourself Stories from Customers like You
Water leak Steven K. • New City , NY • August 10, 2018
Took off cover, installed new parts.
Read more
More
$10.43
- Compare At:
-
$12.52
- You Save:
-
$2.09
Genuine Whirlpool part
By: Whirlpool
Part Number: 285751
Fix a washer that won't agitate or makes grinding noises during wash. This cam kit with dogs restores proper agitation. DIY repair takes 10-20 minutes.
Do-It-Yourself Stories from Customers like You
Agitator top stopped spinning Denis S. • Houston , TX • May 05, 2015
Very easy fix! Order shipped fast and received the item in a couple of days with a 10 minute fix! The step by step video helped most! Thank you so much for this website as it probably would of cost me at least $125 to fix!
Read more
More
$19.95
- Compare At:
-
$23.74
- You Save:
-
$3.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP688805
Secures the control knob to your dryer's control panel. Replace if the clip is broken, cracked, or missing and the knob won't stay firmly attached.
More
$10.43
- Compare At:
-
$12.31
- You Save:
-
$1.88
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3362952
Cracked or broken bleach dispenser cup causing leaks or improper dispensing? This replacement cup restores proper bleach delivery. Easy 10-minute fix.
Do-It-Yourself Stories from Customers like You
Worn out contact in the timer not allowing it to spin/ Norman W. • Bismarck , ND • May 18, 2020
The washer would work fine except it wouldn't spin unless you opened the lid and waited a split second for it to stop. You would hear a bang, then when you closed the lid, it would spin. Since it made that bang noise, I thought the transmission was going bad, so I replaced that. Nope, still the same. So, after a little more research, I found out that the motor has to come to a complete stop for the transmission to go into spin mode. After pulling out the timer and inspecting it, I noticed...
Read more
More
$8.95
- Compare At:
-
$10.74
- You Save:
-
$1.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3363892
Is your washer not draining or leaving water in the tub? A faulty drain pump is often the cause. This repair takes about 30 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
Water leak Steven K. • New City , NY • August 10, 2018
Took off cover, installed new parts.
Read more
More
$51.30
- Compare At:
-
$70.63
- You Save:
-
$19.33
Genuine Whirlpool part
By: Whirlpool
Part Number: W11129408
Houses and secures the lint filter in your dryer. Replace if cracked, warped, or broken to prevent lint bypass and maintain airflow. Verify fit by model.
Do-It-Yourself Stories from Customers like You
Dryer lint screen housing was warped. Michael D. • Reno , NV • January 29, 2022
Bought a new lint screen housing and top flapper. Probably didn’t need the flapper but I didn’t want to set into the repair and find out I did need it.
Read more
More
$43.95
- Compare At:
-
$51.86
- You Save:
-
$7.91
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488729
Secures the handle end cap to the center of your refrigerator door. Replace if missing, stripped, or lost during handle repairs. 8-18 x 1/2 inch size.
Do-It-Yourself Stories from Customers like You
The lint catch was broken Misti P. • Spokane , WA • January 18, 2019
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one.
Read more
More
$8.36
- Compare At:
-
$9.95
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP285655
Secures washing machine hoses to prevent leaks in the water system. Replace if damaged, corroded, or connections are loose. Verify fit by part number.
Do-It-Yourself Stories from Customers like You
Syphonbreak was leaking James O. • Bryant , AL • September 04, 2015
We ordered parts from appliance parts pros and I fixed it.
Read more
More
$9.95
- Compare At:
-
$11.74
- You Save:
-
$1.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387242
Prevents water and air leaks at the dryer front panel. Replace if worn, cracked, or causing moisture issues. Verify fit with your model number.
Do-It-Yourself Stories from Customers like You
Squeaking kenmore dryer that stopped working Paul M. • Norcross , GA • November 28, 2016
First I watched videos about squeaking Kenmore dryers. Then I used that information to open the dryer, diagnosing the fact that the roller on the drum belt tension arm had broken and actually fallen off the arm. The dryer was filled with lint and dust/dirt, so I also saw that the seals on the dryer had deteriorated greatly. AppliancePartsPros website is outstanding, far better than its competitors. This made it easy to find the parts and videos that I needed. It took hours to pull everything...
Read more
More
$19.95
- Compare At:
-
$23.54
- You Save:
-
$3.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP358684
Washer won't spin or drain? A broken lid strike prevents the lid switch from detecting when the lid is closed. Easy 10-minute DIY fix with basic tools.
This part fixes the following symptoms
-
Will not agitate
-
Will not drain
-
Won't start
-
Timer will not advance
See more...
Do-It-Yourself Stories from Customers like You
The spin cycle would not initiate pump to drain tub Douglas B. • Skull Valley , AZ • January 21, 2017
Ordered new lid switch and plunger. Watched help videos and installed new parts, Washer works like new.
Read more
More
$9.95
- Compare At:
-
$11.74
- You Save:
-
$1.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3976308
Maintains watertight seal between outer tub and tub ring, preventing leaks during wash and spin cycles. Replace if leaking from top of drum or spin issues.
Do-It-Yourself Stories from Customers like You
My washing machine smelt horrible Bryan W. • Ogdensburg , NY • August 20, 2018
First off I have to say that Appliance Parts Pro's saved me from hiring a repair person, and quite possibly just getting rid of my washing machine. Their video's helped out SOOOOOOOO much and the advice one of their agents gave me over their online chat helped me trouble shoot something when I got stuck. On top of this they shipped my parts fast enough that less than 12 hrs later they arrived, which allowed me to get my machine up and running way faster than the other options I had available....
Read more
More
$19.95
- Compare At:
-
$23.94
- You Save:
-
$3.99
Genuine Whirlpool part
By: Whirlpool
Part Number: W11095997
Seals the washer shaft to prevent water leaks from the tub during wash cycles. Replace if you notice water pooling under your machine. Verify fit.
Do-It-Yourself Stories from Customers like You
Agitator would not work David W. • Murfreesboro , TN • November 19, 2014
Used the parts and youtube video from your company.
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36
Genuine Whirlpool part
By: Whirlpool
Part Number: W11236646
Metal washer for dryer drum roller support shaft. Replace when you hear tapping, thumping, or squealing noises during operation. Confirm fit with model.
Do-It-Yourself Stories from Customers like You
Roller broke Art M. • Danville , CA • September 23, 2014
Replaced the roller, shaft, rings and washer. After removing the back, reverse threading the nut off, discarding the old hardware and installing the new hardware back in business in about 20 minutes.
Read more
More
$21.95
- Compare At:
-
$25.90
- You Save:
-
$3.95