Alan August 25, 2013 for Model Number RGA 720 EK1WH Recently my wife had the igniter in our Hotpoint range replace. The service company used a GE WB2X9998 igniter, however the oven seems to take too long to ignite ( approximately) up too 1 minute from the time you turn the oven temp knob. Additionally when I look at the glow it seems to be yellow/orange not white as you not in your video.
1 Answer Alan, That is accurate for the oven to take between 60 and 90 seconds for the oven to ignite after you turn the knob for the igniter to get hot enough to open the safety valve. Read More...
Paul July 21, 2013 for Model Number Model 501A I was about to order part #WB2X9998, a stove igniter for the one I removed labeled as 223C3381G003 Model 501A.
1 Answer Hello Paul, This ignitor should work if your old one was a flat style and the wires on this one are long enough. Read More...
Joe S. July 06, 2013 for Model Number hot point rga724ek1wh I have a Hot Point rga724ek1wh oven that will not light so the glow bar is bad. I just want to be sure does (AP2634719) will work for this model and make.
1 Answer Hello Joe, The part recommended for your unit is (AP3875557). The part you are looking at (AP2634719) will work but you will have to use the ceramic wire nuts to wire it in, since it includes no connector. Read More...
Bob June 29, 2013 for Model Number JGBS23AEW3AA I have a GE XL44 gas range, model #JGBS23AEW3AA. The ignitor has burnt out. I ordered a replacement and received a Norton ignitor, part #WB2X9998. Is this replacement ignitor compatible with my gas range? thanks
1 Answer Bob, This part WB2X9998 igniter will work for your unit. The part number that your unit calls for is part number WB13K21 but the one received will work. Read More...
Frank March 09, 2013 for Model Number DR2009WGLP I have a Dandy 20 inch gas stove. The glow igniter is burning orange and needs to be replaced. It is a flat style igniter. Can I use this one--or do you have a universal igniter that would fit? I'm having difficulty locating a replacement part. Thanks for the help.
1 Answer Frank, according to your model the replacement igniter is part number 614295. Thanks! Read More...
Rob December 19, 2012 for Model Number Bosch HGS5042UC Is this the correct igniter for my oven? I'm assuming I will have to splice the two lines and use the wire nuts to make my connections, right? Thanks.
1 Answer Hello Rob! No, part number WB2X9998 is not the correct igniter for your model. For your product the correct replacement is part number 00492431. Thanks! Read More...
Robert September 03, 2012 for Model Number JGBP30WEA6WW My landlord gave me a GE WB2X9998 igniter for my oven? On your website it references ignitor GE WB2X9154 as the correct replacement for my GE JGBP30WEA6WW oven. Can I use it or should I order another one?
1 Answer Hello Robert. If you model calls for the round igniter, you will need to order and replace the old one with the round igniter WB2X9154. Read More...
Eric May 21, 2012 for Model Number JGB908CEK2CC What is the correct replacement ignitor for my GE oven model # JGB908CEK2CC? The norton tag on the ignitor says model # 501 A 0516.
1 Answer Hello Eric! The replacement oven ignitor is part number WB13K21. The replacement broil ignitor is part number WB13X25261. Thanks! Read More...
Joe D. February 15, 2012 for Model Number Older model Magic Chef 24" Gas Wall Oven I'm not sure of the model #, but its at least 15 years old. The old igniter looks exactly like this one, and I understand these are 'standard' in many ovens. Can I assume this will work as a replacement?
1 Answer Joe, without the model number to the appliance we are unable to verify if this part will work. You are more than welcome to try the part and return it if it does not fit. Here is the link to our return policy for you to view, thanks! http://www.appliancepartspros.com/customerservice/returns.aspx Read More...
George February 06, 2012 for Model Number tappan model#72-3981-00/02 Will this replace igniter for Tappan Model # 72-3981-00/02 bottom oven lower burner (bake)?
1 Answer Hello George! The oven igniter used on your Tappan model 72-3981-00/02 is part number 5303935066. Oven igniter part number WB2X9998 is a cross reference to the Tappan igniter and may require adjustments to fit your appliance since it is not called directly for your unit from the manufacture. Thanks! Read More...