Damien June 20, 2016 for Model Number WM2901HVA washer is not draining. Pump motor is running, i've checked the trap, checked the hoses, all good. The impeller on the pump doesnt turn freely at all. Can't seem to find the parts for this specific model anywhere. Need a pump motor for an LG WM2901HVA. Do you have this part and can you ship to Canada? Thank you!
1 Answer Damien, Unfortunately, AppliancePartsPros.com doesn't ship to Canada. But the part number you need for the drain pump motor for the model number you supplied is 4681EA2001S/ EAU61383518. Good Luck, and Thanks Read More...
Jared June 20, 2016 for Model Number WM2101HW LG front end washer will shut down on rinse cycle and flash error code. It also will leak water near the pump. "oe" error message and occasional "ie" error message. How do I know to order a pump assembly vs drain pump motor?
1 Answer Jared, The IE error would be representative of a water inlet error and the OE is a drain error. With this issue it would sound like either the pressure switch is bad or the pressure hose is clogged or damaged and the unit is not sensing that the water is full or that the unit has finished draining. Read More...
Denise June 10, 2016 for Model Number LG WM2301H Washer I want to make sure I"m ordering the correct drain pump for my LG washer. Model WM2301H, also do you have touch-up paint ?
Bc2116 June 08, 2016 for Model Number LG WM3988HWA Hi, we're doing this repair, but we seem to have an extra o-ring in the box. Do we need to put that on the pump or is it extra? Thanks!
1 Answer Hello bc2116. You will need to check and make sure the o-ring is on the pump. If so, then it sounds like they shipped it with an extra one in the box. Read More...
Bernard April 07, 2016 for Model Number LG wm2240cw I need a drain pump for my LG washer. What is the part #
Joe March 24, 2016 for Model Number LG TROMM WM2077CW The washer will not start. When I start the washer all lights come on. I select the cycle but the light keeps flashing. Several months ago I had a drainage problem. I cleaned the filter and the washer worked intermittently. If the drain moter is defective could it cause the washer to not start?
1 Answer Joe, With the unit not starting or bringing in water then the best option would be to put the unit into a diagnostic and see if there are any stored error codes. This will direct you to which part needs to be replaced. Read More...
Steve March 21, 2016 for Model Number WF-T1122TP I have an LG Washer model WF-T1122TP. I don't think it is sold in the US. I am pretty sure it need a new drain pump motor. In order for the washer to drain I have to tap on the motor to get it started. My meter shows 115-120 volts going to the motor. Does it sound like the motor is going bad? Do you sell a motor that will work in my washer?
1 Answer Steve, The drain pump motor does sound like it would be the correct part to replace for your issue but unfortunately we would not have parts for this unit since it is an international use model. Read More...
Lilly March 14, 2016 for Model Number WM3455HS Hi my washer is making an awful noise and it will wash clothes but will not drain and spin them. It keeps coming up with an OE error code. I tried cleaning out the drain pump but it wasn't clogged and the propeller turns freely so I'm not sure what the problem is. I called tech support and was told the drainage pump might need to be replaced he gave me the part number 4621AE200T1 but I can't find it anywhere. It is a front loading LG direct drive washer/dryer combo washer that is at least about 4-5 years old. What exactly would be all the parts I need to fix the drainage pump? Or could it be another problem?
1 Answer Lilly, With the issue that you are having of the unit not draining you will want to first check to make sure that the drain pump is getting 120 vac to it. If it is and the water is not pumping then you would want to replace the pump motor 4681EA2001T. If the pump is not getting power to it then the issue will be the wiring between the drain pump and control board or will be a faulty control board. Read More...
Phil March 11, 2016 for Model Number Maytag Atlantis washer Hello, my washer has been intermittent working and a burnt smell is coming from the machine. I can do a load , fills, spins, drains but has the burnt smell. It has completely stopped working before drain and had to wait a few hours before it started working again. Doesn't matter if load is small or large the burnt smell is there. First time it happened, I heard a weird noise from the washer, and then it cut power. Had to wait next day for it to work again. I'm not sure if it's a motor issue, or something else. I would appreciate if someone could direct me to the right fix so I can get the parts ordered. Thanks
1 Answer Hello Phil. It sounds like the bearings are bad or the motor is bad and will need to be replaced on the unit. Read More...
Jorge January 11, 2016 for Model Number WM2487HWM Don't you have to add some grease or sealant between the water pump and the case before you put the screws to avoid water leaking?