Souriya January 08, 2017 for Model Number 110.42936200 Will this washer rear tub support part# 4434er0003c fit with Kenmore elite HE3t Model:110.42936200. Thank you.
1 Answer Hello Souriya. No, this part is not compatible with the model number you provided. Read More...
Cathy S November 28, 2016 for Model Number WF338AAW/XAA I have a Samsung front load washer that has been working fine until this morning...or so I thought. This morning I started a load of clothes, looked down, and my floor was soaked. I have now on two occasions found what I was thinking was rocks (I'm not sure why I would have even thought rocks possible) but now know it is pieces of metal in the little filter thing on the bottom right side. Visually: when I watch the water come in from the upper left side, through the door window, it looks like it shoots the water toward the glass not inside the drum. The floor gets wet, and twice when messing with it today after a short time the machine dinged and signaled nF (washer tried to fill but was unsuccessful (the water was on the floor)). Everything looks dry as far standing above and looking down the sides of the tub and checking after removing the back panel. There are no obvious hoses leaking. I also cleaned the hose screens which had a little sediment in them. I don't see that there was much talk of flooding going on when initially filling but it sounds like the deteriorating Spider Arm Assembly could be the culprit that is causing it. If the Spider Arm Assembly needs to be replaced, is it best to pull it apart prior to ordering so one would know if any other parts should be replaced?
1 Answer Cathy, The spider would certainly cause the metal material in the drain filter and a leaking door boot could be causing the issue with the leaking. It would be recommended to pull the unit apart to make sure that there is nothing else needed. Read More...
Nate November 27, 2016 for Model Number WM2016CW Replacing spider on back of drum. Need new mounting hardware. Need the part number please?
1 Answer Nate, presumably you mean the six(6) spoder mounting bolts that hold the spider to the back of the spin basket. The part number should be 4011FA4353E / 4011FA4353E . They are sold separately, so you will need to order six(6) (two per arm). The parts are in stock and available at this time. Thanks Read More...
Connor October 26, 2016 for Model Number LGWM2016CW Do I need to replace the outer tub seal? It seems to be ok. What is the risk if not changed?
1 Answer Connor, By not changing the tub seal the unit could develop a leak around the seal. It is best that you would replace it at the same time as replacing the spider. Read More...
1 Answer Hello Rob. You will need to replace the tub seal 4036ER2003A when you replace the spider. Read More...
Collin September 09, 2016 for Model Number LG WM2010CW I'd like to confirm that this will work on LG WM2010CW. The screws' head holding the spindle on the tub are conic. It means that the spindle are also conic where the screws attach. The tub also protrude a bit inside the spindle. Is this item compatible to that? Do you ship to Canada?
1 Answer Hello Collin, I'm sorry but the part 4434ER0003C recommended for the model provided has been discontinued by the manufacturer and no satisfactory substitutions have been provided. The part you were viewing is not listed for this model and we cannot guarantee it will fit properly. You could order 3045ER0021E which is listed as a satisfactory replacement part for your model and includes the spinner support assembly, (spider). We are sorry but we are not set up to ship to Canada. We can only ship inside the United States. Read More...
David September 05, 2016 for Model Number kenmore 110.45962400 Will this part work for our washing machine. The original kenmore part #8540457 was replaced with Whirlpool part #WHW10202464.
1 Answer David, Unfortunately part number 4434ER0003C will not work for this model and the only way to get the spider is to get the spin basket WPW10250573. Read More...
Kwan September 02, 2016 for Model Number 970-C42072-00 is part # 4434ER003C Spider fit my washer model 970-C42072-00
1 Answer Kwan, The only way to get the spider on this unit would be to get the inner tub which is part number 131618500. Read More...
Jer August 05, 2016 for Model Number WM2010CW Do you have the bolts that fasten this spider arm? Mine were damaged removing them. They had too much lock tight on them.
1 Answer Hello Jer, 4011FA4353E is a part number for LG spinner assembly bolts but since they are not on the parts list for the model provided, you may have to order the spin basket assembly 3045ER0021E to get the correct bolts if these do not fit. Read More...
David July 24, 2016 for Model Number 11045986400 Can I order just the spider support arm for my kenmore elite instead of buying the whole drum assembly?
1 Answer Hello David. Unfortunately the only way to get the spider is to purchase the basket assembly part number WPW10269756 Read More...