Tom December 31, 2012 for Model Number jvm1431ba 001 I am lookin for a magnatron for this model. Do you have the parts for this? How much is the cost including shipping? SEC PARTS NO. DC03-30033A, GEA CAT.NO. WB27X10017
1 Answer Tom, the magnetron is part number WB27X10735. You may click on the part number to view the price and parts information. You may use the following link to view our shipping options. Thanks! http://www.appliancepartspros.com/customerservice/shipping.aspx Read More...
Lance December 31, 2012 Have a GE - JVM 1650 BH02 microwave - the magentron is a samsung - om75p(10) what is the cost/ also high voltage diode - Ge #wb27x1160HV - its a $3.00 diaide - how can each be tested and I see prices like $56 for the diode - is this nuts or what its a $ 3 diode.
1 Answer Hello Lance. WP13091701 is the diode and TJ2M217JB is the magnetron for the unit. The magnetron should read less than 1 ohm, have no cracked magnets, and should not smell burnt. The diode should only read in one direction. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Lance December 30, 2012 for Model Number ge spacemakert jvm 1650 bh02 How do you test the the magnetron?
1 Answer Hello Lance. The magnetron should read less than 1 ohm on a meter. And should be open to ground. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Art December 29, 2012 for Model Number GE spaceemker Microwave jvm16sobb0011 Will this work? I believe mine says OM75P10) nothing else.
Renegade December 25, 2012 for Model Number JVM1651WB003 I am a little confused on p/n cross referencing for the magnetron for microwave model JVM1651WB003. I found the parts list along with the schematic inside of unit when removing the part. The parts list has 2 numbers for the magnetron: SEC p/n DE03-30033A and GE p/n WB27X10017. The part removed is a Samsung OM75P (10). Your part AP4245180 (OM75P910)ESHL replaces the DE03-30033A but not the WB p/n. This doesn't make sense. Will your part work OK?
1 Answer Hello Renegade! If manufacturer part number DE03-30033A is on your current magnetron, yes, the replacement OM75P(10)ESHL (OM75P(10)ESGN) will work on your product. Thanks! Read More...
Mike December 13, 2012 for Model Number GE Spacemaker JVM3670SK02 I bought this microwave new 6 years ago at Sears. According to the schematics the magnetron should be WB27X10017; however, the magnetron in the microwave says Samsung OM75P. I have two questions: 1. Was this sold to me with the wrong magnetron? 2. Do I have the option of using either the OM75P or the WB27X10017? Thanks. Mike
1 Answer Hello Mike. The only cross referrence for the model number you provided is TJ2M217JB and 5304408930. The magnetron in the unit is correct. Read More...
Al November 27, 2012 for Model Number rem25sj01 Bob, I need a magnatron for the above microwave. The on e in it says OM75S(31). Is there any sub for this or are they no longer available.Thanks Al
1 Answer Hello AL. Based on the model number provided, WB27X10585 is the correct magnetron assembly. Read More...
Mike September 12, 2012 for Model Number samsung smh7177ste Will your magnetron, part number AP4245180, work in the above listed model microwave?
1 Answer Hello Mike, The only magnetron that will work as per the manufacturer without causing a fire hazard is W10126785. Read More...
Sunny September 09, 2012 for Model Number JVM1440BD 001 -- GE Spacewalker Microwave (Serial RA907655S) Can I use this part insted of Item Number: AP2025937 Manufacturer's Number: WB27X10017? I have taken out the part from Microwave, it has sticker on it, which says Samsung OM75P(10) on it.
1 Answer Hello Sunny! Unfortunately, the manufacturer does not offer the magnetron OM75P(10)ESGN as a cross reference to your replacement WB27X10735. We can not guarantee that the requested magnetron will fit your unit. Sorry about that! Read More...
Jenny M. June 05, 2012 for Model Number Samsung Microwave Model #smh7178std Hello! Our Samsung Microwave (Model # SMH717STD) will turn on but sparks and makes a VERY loud popping noise. If we replaced the MAGNETRON Part # OM75P(10), will this theoretically fix the problem? Thank you!!
1 Answer Hello Jenny. If the sparking is coming from the magnetron then yes, you will need to replace the magnetron in the unit. Check and make sure the stir assembly DE97-00367A is not bad. If so, you will need to replace it as well. Read More...