Joe January 18, 2023 for Model Number MFD2561HEB Hi, I have a slow drip coming from the water dispenser and I have already replaced the water filter, the filter head, and just now the dual valve inlet. There was no problem with dripping until I replaced the water filter so it seems odd that it would randomly start dripping. What might be causing this? Thank you so much!
1 Answer Joe, Have you ran at least a gallon of water through the filter to remove the air from the lines? Read More...
Paul March 15, 2022 for Model Number JFC2089HES Filler tube to icemaker keeps freezing up. Ice in the tray freezes up like a block.
1 Answer Paul, Thanks for the question!!! This is likely due to a slow leak from a faulty valve WP67005154. Read More...
Sal June 03, 2020 for Model Number KSBS25FKBL01 Hi, looking for a dual water inlet valve for Kitchen Aid refrigerator model KSBS25FKBL01. what part # should I order? thanks. Sal
1 Answer Hello, Sal. Unfortunately this part is no longer available from manufacturer. The part number is 2199838. Try to find it online from private party. Thank you. Read More...
Lou February 01, 2020 for Model Number 253.70312214 The ice maker is making the noise like it is filling up with water but no water is in the tray. We can still get water out of the door.
1 Answer Lou, Check to make sure the fill line has not become frozen and blocking the water from filling the ice mold. Other than that the water valve would be the only other option especially since you hear it being energized and not filling. 242253002 Read More...
Hamish September 16, 2019 for Model Number JFC2089HES A month or so ago, my ice maker started dripping water into the ice cube catch bucket/tray so that a big block of ice forms in the far back corner of the ice bucket. The drip does not happen when the ice maker is off (arm up), only when it's actively making ice (arm down). The freezer drain was clogged and I cleared that, but the problem still persists. The ice tray Fill Funnel looks fine, but clearly it's leaking from somewhere near it, but there is no visible crack. Lastly, sometimes when I am filling up a glass from the water dispenser, the solenoid pulses on and off intermittently. With all of that info, do you think I need to replace the Dual Water inlet valve? What about any part of the ice maker itself, like the Fill Funnel (again, this doesn't appear to be cracked at all) or any other part? The drip only happens when the ice maker is actively making ice. This appliance is about 14 years old. Thanks in advance for any help you can offer!
1 Answer Hamish, The molding of the icemaker could be deteriorating causing the leaking issue. Poor water pressure to the icemaker could cause this as well. Make sure that you have a good filter. This could also cause the hammering noise when dispensing water. If the filter is good you may have a faulty filter head assembly that would need to be replaced. Read More...
Kerry June 18, 2019 for Model Number WP67005154 We just installed a brand new dual water inlet valve. We did exactly how the video shows it. Once the refrigerator water line is pushed into the valve, there is a slow drip. (From where white tube connects to blue valve). It is pushed. It was checked for tightness. What is causing this drip? Thank You
1 Answer Kerry, you will want to check the tubing for any burs or scratches as these can cause a break in the seal and allow water to flow through. You may also want to check to ensure that the tube end is flat and not angled as this can cause an improper seating not allowing the tubing to seat all the way in. Read More...
Joe October 11, 2018 for Model Number MSD2651HEW Looking for the correct water valve for this refrigerator. Your web site shows two schematics and that it could be either 67005154 or 67006531. I will give you the serial number in case its needed. Please Advise. Serial number 53903109LV thanks for your help.
Ken Y. September 13, 2017 for Model Number MFC2061HEB Upon installing the new 12544118 I messed up the tubing Locks when removing the tubing from all three lines anchors. Upon installing the line into the new one, can I use the old color-coded serrated lock washer on them? If so can I buy the new parts from you?
1 Answer Hello Ken, You can use the old tubing locks with the new part and there is no problem with buying the water valve WP67005154 from us. Read More...
Heidi G April 01, 2017 for Model Number 59676529500 Hi we are having issues with getting filtered water and ice. We checked the water line and there is water. It makes the noise like it is going to make ice but nothing. What could this be?
1 Answer Heidi, The part number that would most likely cause this would be the filter head assembly WP67004106. Read More...
Heidi G March 31, 2017 for Model Number 59676529500 My water dispenser is not getting water nor the ice maker. Its making a noise like ice will dispense but no ice. We checked the water line and there is water from the wall to the fridge (valve). What would we need to order?
1 Answer Heidi, You will want to put the water filter bypass into the filter head and see if water or ice works. If it does then the filter is bad and if not then the filter head will be the issue. The bypass cap is W11395888. Read More...