Mark H January 08, 2018 for Model Number MVWX500XW2 Do you have a Seal and Bearing Kit for this model Maytag. Thank You
1 Answer Hello Mark. No, you will need to replace the gearcase W11454372 to replace the seal and bearings. Thank you. Read More...
John January 06, 2018 for Model Number Kenmore 119.28002011 Is this part compatible with the Kenmore 119.28002011? Thank you for the help. John
1 Answer Hello John. No, you will need to order W11132267 for the bearings needed. Thank you. Read More...
Robert January 05, 2018 for Model Number WTW8900BC0 Will this bearing kit fit my model? According to Whirlpool, I have to replace the entire outer drum.
1 Answer Hello Robert, You will need to order the Bearing and Tub Seal Kit W10435302 for the model provided. You will also have to get the tool W10447783 for the parts installation into the plastic outer tub. This is necessary to prevent damage to the tub during the removal/installation of the parts required for this repair. Read More...
Gerry December 07, 2017 for Model Number wtw8240yw0 To replace the seal, bearing, and the shaft, is it the pretty much the same to replace it on my unit, or is there a different way? Thanks
1 Answer Hello Gerry, The repair video listed under part W10435302 and W10447783 is the procedure used to perform this repair. The alternative to this procedure is to order the tub assembly W10381078 which has the shaft, bearings and seal pre-installed by the manufacturer. Read More...
1 Answer Hello Steve, yes bearing and tub seal kit part number W10435302 is compatible with your unit. The manufacturer recommends you use tool part number W10447783 for installation. Thanks! Read More...
John November 04, 2017 for Model Number WTW6600SW2 I have the correct kit and followed the how to video step by step to replace bearings and shaft on washer except when I got to the upper bearing removal. The upper bearing was rusted and had disintegrated and only the inner race and ball bearings came out , how do I remove the outer race? It's stuck and currently soaked with WD 40 to loosen. Don't want to damaged plastic tub being to aggressive, options/guidance?!?!
1 Answer John, In order to get the outer racer out try tapping it out with a punch working your way around the racer to get it out evenly. Read More...
Sam September 28, 2017 for Model Number MVWX700XW0 Do you have the bearing kit for this model Maytag Bravos?
1 Answer Hello Sam, The spin bearing for this models' design is actually a part of the Gearcase Assembly W11132267. Read More...
Nicholas September 21, 2017 for Model Number WTW5640XW2 Will the bearing kit W10435302 work for fixing the model WTW5640XW2?
1 Answer Hello Nicolas. No, you will need to order and install part number W11132267 for the gearcase for the unit. It comes with the bearings needed. Thanks. Read More...
Chuck August 12, 2017 for Model Number MVWB400VQ0 I just replaced the bearing shaft on my Maytag Bravos MVWB400VQ0. It is now leaking. Upon inspection, There was a piece of seal laying on the bottom of the tub that I thought might have been sealant at first. How could that have happened? (To avoid in the future) Can I buy just the rubber seal from this kit? I don't want to spend another 100 bucks for a small rubber ring. Thanks.
1 Answer Chuck, Unfortunately a replacement tub seal is not available as a separate part. You'll need to replace the complete kit, if you can't get the seal to seat and seal properly. Sorry. Read More...