D February 11, 2023 for Model Number WED8500SRO I have watched your excellent video on how to install the Whirlpool repair kit (AP3109602) and I think I should be able to make the repair. Our dryer did not show any symptoms other than maybe being a tad bit noisier. Today it would not tumble at all. Power is good and panel display seems normal. My question to you is: is the repair kit going to fix the problem or might there be something else involved?
1 Answer It will likely solve the issue as any one of the parts may be the issue for the dryer not tumbling. There are other parts that may also be the cause but these are the most likely. Read More...
Dwight January 27, 2023 for Model Number 110.67092600 I need to replace the idler / tension pulley. What do I need to order? Thanks
Mark January 06, 2023 for Model Number MEDX500W After replacing parts, now the drum is slow to start and will not turn if more than a few items are loaded. Why?
1 Answer Mark, the rollers would need to be checked to see if they rotate freely. If they do not, it is likely that residue had built up on the roller shafts that would need to be cleaned. The felt seal would also need to be checked to see if a portion had rolled, causing tension and preventing the drum from rotating properly. Read More...
Bob September 24, 2022 for Model Number Kenmore Elite 110.85081400 Dryer Thank you for the fantastic repair video. I bought the WHIRLPOOL Dryer Repair Kit (27 Inch Wide Dryers, Thin Twins) Part #: AP3109602 (4392067) and performed the installation of all the parts with no issues. The two questions I have are: Upon re-installing the drum the video says to ensure the silver metal tab is facing the front of the dryer, is this correct? When I did this, the new belt does not line up with the track from the old belt. I turned my drum around so the belt and the old track line up. Why does the metal tab need to be facing the front of the dryer?
1 Answer Install so the belt is lined up with the old track. This ensures that it is assembled the same as before. Read More...
Ebeth June 02, 2022 for Model Number GEW9200LQ8 My dryer is intermittently not turning on, unable to change options for different settings. Thinking control panel. Opinions before I order. TY!
1 Answer Ebeth, the control on button would need to be tested using the wires found at connection P3 after the dryer power cord is unplugged. From the wire at pin 12 to the wire at pin 9, there should be continuity when the button is pressed. If there is not, the user interface control WP8530589 has failed. If there is continuity, it would be likely that the main control WP8546219 has failed (main control has been discontinued by the manufacturer). Read More...
Chad March 12, 2022 for Model Number WGD9200SQ1 What is the correct belt size for this dryer thanks chad
1 Answer Chad, the belt 661570V for the model provided is about 93 1/2" long and 4 ribbed. Read More...
Ken February 21, 2022 for Model Number MEDB725BW0 Order repair kit (AP3109602) based on exact Maytag dryer model number. The belt in the kit did not fit and Customer Service said there is a disclaimer saying parts may not fit. The CS person said I need to order a new belt and I could not return the incorrect one. No fault on my part, but its my problem. Makes me second guess ordering from them in the future. Not the best experience, but still hoping for a simple resolution. Order number: #13671306
Dani February 09, 2022 for Model Number MED8200FW0 My dryer wont tumble with more than one or two pieces of clothing in it. I figure its probably the tensioner spring or the belt is stretched. Cannot find a video on the repair for my model. I am worried that the repair kit 4392067 won't fit since my dryer looks a little different than that in the video. I know I would need to purchase the spring separate, but will this fit my model of maytag MED8200FW0? Also, do you know of a video that will show how to repair my machine?
1 Answer Dani, Thanks for the question!!! We do not have videos for your exact model. There are more videos listed under each part that is in the kit that may provide more help. And yes this is the correct kit for your model. Read More...
Paul February 07, 2022 for Model Number MEDE300VF1 Will everything in the kit fit a mede300vf1? How many rollers does this model have?
1 Answer Paul, the idler pulley, and the 4 rollers will work with the model provided. The belt in the kit is 1" longer than the manufacturer recommended belt WPW10112954 and might not work. Read More...
Nelson December 22, 2021 for Model Number WED9270XW1 Is there a dryer repair kit for Whirlpool Duet WED9270XW1?
1 Answer Nelson, Based on the model number provided the kit number requested should be 4392067 Read More...