Parts for Kenmore Elite 79575075910: Refrigerator Parts

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.

Leveling leg for refrigerators. Installs at bottom corner to elevate and stabilize the appliance. Replace if broken, compressed, or no longer secure.

Connects air ducts in your refrigerator's cooling system. Replace if cracked, broken, or missing to restore proper airflow between compartments.

Ice not dispensing or spilling? This refrigerator ice storage bucket collects and holds ice from your ice maker. Simple DIY install in 10 minutes.

Small protective cap covers component connections or openings in your refrigerator. Replace when cracked, missing, or worn to protect against dirt and moisture.

Supports the dryer drum for smooth, even rotation during cycles. Replace when you hear squealing or notice drum wobble. Confirm fit with your model number.

Refrigerator shelf roller assembly that attaches to pull-out shelves for smooth gliding. Replace if rollers are cracked, broken, or wheels no longer spin freely.

Platform that supports and guides refrigerator storage drawers along slides. Replace if cracked, damaged, or broken to restore smooth drawer operation.

Replacement supporter cover for bottom-mount refrigerators. Secures internal panels and restores proper alignment. Needed when original is cracked or missing.

Outer cover that protects the tray area in your bottom-mount refrigerator. Replace if cracked, broken, or missing to restore proper fit and appearance.

Reduces food odors in your refrigerator's fresh-food compartment by neutralizing smells at the source. Replace when odor control becomes less effective.

Replace worn drawer rail guides to restore smooth sliding and proper alignment in your refrigerator. Fixes sticking or misaligned drawers. Verify fit by model.

Fix refrigerator door misalignment or poor sealing with this door alignment magnet. Restores magnetic retention to keep panels and components secure.

Seals freezer door to maintain proper temperature. Replace if cracked, torn, or not sealing properly causing frost buildup. Confirm fit with your model.

Replaces a broken, cracked, or missing freezer door handle on your bottom-mount refrigerator. Restores secure grip and clean appearance.

Replace a cracked or missing door stopper on your bottom-mount refrigerator. This plastic component prevents the door from overextending and damaging hinges.

Seals the refrigerator door to maintain proper temperature and reduce energy loss. Replace if worn, torn, or not sealing tightly. Verify fit with your model.

Seals your refrigerator door to prevent air leaks and maintain temperature. Replace when torn, cracked, or loose to restore efficiency. Verify fit.

Replaces the flap panel between French doors that seals the center gap. Order when original is cracked, broken, or won't stay closed properly.

Plastic slide that supports and guides refrigerator or freezer drawers for smooth opening and closing. Replaces worn, broken, or cracked guides.

Replacement door basket assembly for bottom-mount refrigerators. Installs on inner door liner to organize bottles, jars, and condiments. Replace if cracked or broken.

Replacement door basket for refrigerator inner door. Holds bottles, jars, and condiments securely. Replaces cracked, broken, or missing baskets.

Replacement door basket assembly for refrigerator doors. Restores storage for bottles, jars, and condiments. Replaces cracked, broken, or missing bins.

Replace a cracked, broken, or missing refrigerator door basket. This bin mounts to the inner door to organize and hold bottles, condiments, and small items.

Replacement door basket for bottom-mount refrigerators. Mounts inside the door to hold bottles and jars. Replace if cracked, broken, or missing.

Door stopper assembly for bottom-mount refrigerators. Prevents door from swinging too far or slamming. Replace if cracked, broken, or missing.

Stabilizes rotating assemblies in your refrigerator to reduce wobble, wear, and noise. Replace when you notice excessive movement or grinding sounds.

Mounts at the hinge to limit your refrigerator door's opening angle. Replace if cracked, broken, or missing to prevent over-swing and protect the hinge.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

Rail holder secures door shelves in your refrigerator. Replace this part if it's cracked, broken, or missing and shelves won't stay properly aligned.

Slide rail that guides and supports refrigerator drawers for smooth opening and closing. Replace if worn, bent, cracked, or causing noisy operation.

Drawer rail connector for refrigerators. Secures and aligns the drawer slide rails to the cabinet frame. Replace if cracked, broken, or missing.

Restores smooth drawer operation in your refrigerator. Replace when drawers stick, sag, or don't glide properly. Verify fit with your model number.

Replacement door bar for bottom-mount refrigerators. Installs on the interior door to hold items in place. Order a new one if cracked or broken.

Ice maker grinding or not ejecting cubes? This gear drives the ejector blades to push ice from the tray into the bin. Restores harvest cycles quickly.

Replace a cracked or broken cover support bracket in your bottom-mount refrigerator. Secures the internal cover panel in place. Direct fit part.

Center hinge assembly for bottom-mount refrigerators. Supports and aligns the middle door. Replace if cracked, broken, or door sags. Direct fit.

Connects refrigerator doors and enables smooth opening and closing. Replace if hinge is cracked, broken, or worn from normal use or accidental damage.

Secures components inside your refrigerator. Replace if broken or missing to prevent rattling and ensure proper part alignment. Confirm fit with model.

Spanner wrench tool for adjusting refrigerator door hinges. Enables precise up-and-down door alignment in tight spaces. Replace if lost or damaged.

Fix doors that won't close properly or mechanisms that stick with this tension spring. Restores correct alignment in refrigerator components.

Secures and guides your refrigerator door for smooth opening and closing. Replace if door sags, rubs, or won't seal properly. Confirm fit by model number.

Upper hinge assembly supports your refrigerator door and ensures smooth opening. Replace when door sags or gaps appear. Verify fit with your model number.

Duct cap assembly for bottom-mount refrigerators. Covers and secures ductwork in the air circulation system. Replace if cracked, broken, or missing.

Restores tension to lever mechanisms in refrigerators. Replace when lever sticks, slips, or fails to return properly. Verify fit with your model number.

Lever won't return or latch securely? This tension spring restores proper lever movement and engagement. Small repair that fixes loose or non-functioning levers.

Fix unresponsive controls or blank display with this refrigerator display power control board. Restores electronic functions and temperature settings.

Microwave door won't latch or release properly? This lever holder bracket secures the door lever assembly to restore smooth door operation. Easy DIY fix.

Refrigerator display cover assembly protects control panel electronics. Replace if cracked, broken, or discolored. Installs over user interface.

Replacement wire harness connector for refrigerators. Restores secure electrical connections between wiring and control components. Needed when damaged or worn.

Connector link between refrigerator door and cabinet. Replace if original is broken, cracked, or worn. Essential for smooth door operation and alignment.

Refrigerator not cooling or running constantly? The compressor circulates refrigerant to maintain proper temperature. This repair requires expertise.

Fix a refrigerator that's not cooling properly or has ice buildup with this evaporator assembly. Moderately difficult repair requiring basic tools.

Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

Vibration-isolating grommet that mounts between the compressor and chassis. Replace if cracked, worn, or missing to restore proper cushioning.

Replacement drip tray for bottom-mount refrigerators. Installs beneath the unit to catch condensation. Replace if cracked, missing, or worn out.

If your refrigerator has uneven cooling or fan noise, the fan guide may be damaged. This part channels airflow properly and prevents blade rubbing.

Refrigerator not cooling or making unusual noises? This compressor sealing pipe restores proper refrigerant flow. Moderate difficulty repair part.

Water pooling inside your refrigerator? This drain tray assembly collects defrost water and prevents leaks. Fits in the base to maintain proper drainage.

Protective front cover panel for refrigerators. Installs on the exterior to conceal components. Replace if cracked, broken, or missing.

Replaces broken or missing refrigerator door stop. Limits door travel to prevent over-extension and maintain proper alignment and smooth operation.

Drier assembly for refrigerators. Installs in the sealed refrigerant system to remove moisture and contaminants. Replace if damaged or worn during repair.

Secure loose internal components with this refrigerator mounting clip. Replace if parts shift or become misaligned. Verify fit with your model number.

Fix a refrigerator that won't cool, has display errors, or temperature control issues with this electronic control board. Moderate DIY repair for bottom-mount models.

Fridge won't cool or evaporator coil freezing over? The defrost control assembly regulates cooling and defrost cycles. Moderate DIY repair.

If your refrigerator light stays on or interior won't cool properly, the door switch may have failed. This magnetic switch detects door position.

Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.

Fixes warm or cool spots in your refrigerator. This fan guide assembly directs proper airflow in the compartment. Compatible with multiple models.

Cracked or missing light cover causing dim fridge lighting? This interior light lens protects the bulb and restores even illumination. Easy 5-minute fix.

Controls ice dispenser door opening and closing. Replace if door won't open, stays open, or motor makes no sound when dispensing. Mounts behind dispenser trim.

Fix freezer light staying on or not turning on when door opens. This magnetic reed switch detects door position. Located on freezer wall, easy DIY.

Interior light won't turn off when door closes? This refrigerator door switch cover protects and aligns the switch for proper operation. Simple DIY fix.

Fix a refrigerator that won't run or operates erratically with this DC motor assembly. Restores powered movement and control in bottom-mount models.

Fix frost buildup in your bottom-mount refrigerator with this defrost heater. Restores proper defrost cycles. Moderate DIY repair, takes 1-2 hours.

Fix frost buildup in your refrigerator with this defrost heater. Melts ice from evaporator coils to maintain proper cooling and prevent excessive frost.

Illuminates refrigerator interior when door opens. Replace when light dims, flickers, or fails to restore bright visibility. Verify fit by model number.

If your refrigerator won't power on or has intermittent electrical issues, the power cord assembly may need replacement. Simple plug-in repair.

Fix a refrigerator that won't cool, stops running, or has temperature control issues with this power control board assembly. Restores proper operation.

If your refrigerator display is dead, shows error codes, or behaves unpredictably, this sub PCB assembly processes inputs and controls specific functions.

Display not lighting up or buttons unresponsive? This control board assembly powers and controls your refrigerator's user interface and touch controls.

Ice maker overflowing or not stopping? This shut-off arm lever controls ice production by sensing bin levels. Simple plug-and-play repair.

Ice maker stopped making ice or won't shut off when bin is full? This assembly automates the fill, freeze, and harvest cycle to restore ice production.

Fix a refrigerator that stopped making ice or produces slow, irregular ice cycles. This ice maker assembly restores automatic ice production. Moderate DIY.

Ice not dispensing or slow to fill? This auger motor controls ice movement from the icemaker to the dispenser. Fixes clumping and jamming issues.

Secures water supply line connections in your refrigerator. Replace if leaking, loose, or damaged to restore proper ice and water dispenser function.

Secures water tubing to prevent leaks and disconnections in your refrigerator's water line system. Replace if clip is broken, missing, or tubing moves freely. Confirm fit with your model number.

Fix inaccurate temperature readings or sensor errors with this refrigerator sensor control board. Restores proper sensor communication and feedback.

Fan grill assembly houses the circulating fan in your refrigerator. Replace if the plastic grille is cracked, broken, or damaged from normal wear.

Ice bin cracked, warped, or causing weak dispensing and jams? This ice bucket assembly stores and delivers ice to your dispenser. Easy DIY repair.

Ice maker stopped making ice or dispenser not working? This ice dispenser assembly includes the complete ice maker unit. Fixes inconsistent ice production.

Fix water leaking from your refrigerator door with a new water tank reservoir. Located behind the bottom door panel, this tank supplies your dispenser.

Plastic water supply tube for bottom-mount refrigerators. Connects water line to dispenser or ice maker. Replace if cracked, leaking, or broken.

Plastic tube for refrigerator water or drain systems. Replace if cracked, broken, or leaking. Installs inside refrigerator cabinet or door assembly.

Secures and routes the water tube along the cabinet or door. Replace if cracked, broken, or missing to prevent kinks and keep tubing properly positioned.

Connects water tubing inside your refrigerator to supply the ice maker and water dispenser. Replace if cracked, leaking, or unable to hold tubing securely.

Plastic water supply tube that connects the main water line to your refrigerator's dispenser and ice maker. Replace if cracked, leaking, or damaged.

Water supply line connects reservoir to dispenser and ice maker. Replace if cracked, leaking, or damaged at connection points. Installs inside refrigerator.

Ice maker not making ice or water dispenser weak? This water inlet valve assembly controls water flow to restore ice production and dispensing.

Fix poor water taste or slow flow with this refrigerator water filter assembly. Includes activated carbon blocks and internal water valve components.

Fix ice maker overflows, water leaks, or no water to dispenser. This inlet valve controls water flow from your supply line. DIY-friendly repair.

Fix no ice, slow water flow, or leaking issues with this refrigerator water inlet valve. Controls water supply to ice maker and dispenser.

Fix refrigerator cooling issues with this gas valve assembly. Direct replacement part for bottom-mount and side-by-side models. Moderate DIY repair.

Fix no water or ice issues with this refrigerator water valve assembly. Controls water flow to icemaker and dispenser. Moderate DIY repair in 30-45 minutes.

Plastic trim cap that snaps over exposed fasteners and mounting posts on your refrigerator. Replace if cracked, broken, missing, or discolored.

Fix water dispenser leaks or no ice with this inline water connector tube. Joins refrigerator water lines to restore secure flow. Simple repair.

Water line tube connector for bottom-mount refrigerators. Replaces cracked, leaking, or broken connectors that secure water supply tubing connections.

Fix water leaking from your refrigerator's filter area with a new filter head assembly. Solves filter connection issues and slow water flow. DIY repair.

Removes impurities and contaminants for clean, fresh-tasting water and ice. Replace every 6 months or when water flow decreases. Verify fit with your model.

Plastic clip secures tubing and pipes inside your refrigerator. Replace if cracked, broken, or missing to keep lines properly routed and organized.

Molded door shelf cover for the home bar compartment. Replaces cracked, broken, or missing covers. Installs on the refrigerator door for a finished look.

Replacement door hinge assembly for your refrigerator. Installs on the cabinet to support the door. Replace if cracked, bent, or worn for proper alignment.

Secures and supports refrigerator door pivot for proper alignment and smooth operation. Replace when door sags, seals poorly, or binds. Confirm fit with model.

Replaces a cracked, broken, or missing ice dispenser door handle on your refrigerator. Installs on the exterior dispenser for easy ice access.

Roller component for the ice dispenser door handle on bottom-mount refrigerators. Replaces broken, worn, or missing rollers. Ensures smooth handle operation.

Seals the ice bank door to prevent warm air from melting ice and causing clumping. Replace if ice melts, refreezes into clumps, or frost forms around the bin.

Air filter assembly removes odors and contaminants from your refrigerator. Replace every 6 months for optimal freshness. Verify fit by your model number.

Replaces worn air filter in your bottom-mount refrigerator to reduce odors and maintain fresh air in the food compartment. Replace when filter is clogged or every 6 months. Check model compatibility before ordering.