Dishwasher Control Panel Lcd Parts

Inner door panel replaces the interior face of the appliance door, restoring a clean surface and proper support for door components so the door can close and seal as intended. Ideal when the door liner is cracked, dented, or visibly worn. What it does:

• Serves as the interior surface of the door and supports the inner glass or window.
• Provides a mounting surface for latches, seals, and related hardware to help maintain a proper door closure.
• Reduces rattling, visible damage, or interior door gaps that can affect operation.
• Protects internal door components from debris and normal wear.

• Disconnect power and unplug the appliance before starting any repair.
• Use basic hand tools to remove door trim or screws; keep all fasteners for reassembly.
• Handle inner glass and sharp edges carefully—wear gloves and eye protection.
• Refer to the appliance's service manual or OEM instructions for model-specific removal and reinstallation steps.

Replacement keypad assembly that restores the front control interface on compatible GE appliances, giving reliable button response and straightforward entry of settings when the original keypad is worn, damaged, or unresponsive. What it does:

• Provides the user interface for selecting cycles, temperatures and timer settings by transmitting button presses to the appliance control.
• Replaces worn, cracked, or non-responsive buttons and membrane surfaces that no longer register inputs.
• Can resolve symptoms like unresponsive or intermittent buttons, erratic control behavior, or failure to accept commands from the front panel.
• Works with the appliance's electronic control to return normal keypad operation when the control board itself is functioning.

• Always disconnect power to the appliance (unplug or switch off circuit breaker) before starting any repair.
• Handle the keypad and any attached ribbon cable carefully to avoid damaging contacts; avoid touching circuit traces.
• Follow the appliance service manual for removal/replacement steps and torque values for fasteners.

This genuine OEM part is a touchpad control panel assembly for dishwashers. The touchpad control panel assembly is the plastic piece that houses the selection buttons of the dishwasher that control the desired setting of the washer. If the touchpad control panel assembly is no longer responsive to touch, it will need to be replaced.To replace this part, start by turning off the power to the appliance. Then take a screwdriver or putty knife to release the control panel from its locking tabs. Pull up gently to pry the control panel out of its place. Once removed set it to the side, and remove the wire harness and any individual wires that are attached to the control panel. Once removed, place the wires into the new unit in their correct terminals. Snap the new control panel assembly into its proper position and restore power to the dishwasher. This authentic replacement part is sourced directly from the manufacturer and is sold individually. It is compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand dishwashers.

This is a Bosch dishwasher control board. The dishwasher's control board ensures that the various cycles and settings can be properly managed, such as the washing and draining cycles. If the user notices issues with dishes not coming out clean after a full cycle, the control board should be checked for error codes or signs of visible wear and tear that may indicate it needs to be replaced. Make sure that the dishwasher is turned off, unplugged, and completely disconnected from its power and water sources. It's recommended that work gloves are worn to prevent injury. This is a genuine OEM part and has been sourced directly from the manufacturer. This is an authentic part and as such is sold individually and made from durable, high-quality, non-corrosive materials to ensure the highest possible quality. This part is compatible with dishwashers that have been manufactured by Bosch, Thermador, Gaggenau, and various other brands.

This electronic control board is the appliance's main control (PCB) that coordinates programmed functions and powers key components. Replacing a failed board restores accurate cycle timing and responsive controls for reliable, consistent operation. What it does

• Manages the timing and sequencing of appliance operations
• Interprets inputs from the user interface, sensors, and switches
• Controls power to loads such as motors, valves, heaters, and fans
• Common symptoms of failure: won't start or complete a cycle, unresponsive or erratic controls/display, error codes/alarms, or intermittent operation

• 1 electronic control board

• Disconnect power (unplug or switch off the circuit breaker) before servicing
• Use ESD protection and handle the board by its edges to avoid static damage
• Note/photograph wire locations; transfer connectors one at a time and seat them fully
• Run diagnostics/self-test after installation if available

This control panel mounts on the appliance's door and provides the push-button interface for selecting cycles and options. Replacing a cracked or unresponsive console restores reliable button operation and a clean, factory look. What it does:

• Houses the user-interface buttons and indicator windows used to select cycles/options
• Provides a rigid mounting surface for the door's UI components
• Helps protect internal wiring at the top of the door
• Typical symptoms: buttons don't respond or work intermittently, unit won't start when Start/Resume is pressed, selections change unpredictably, or the console is cracked/loose

• One console assembly

• Disconnect electrical power; turn off the water supply if needed
• Open the door and remove the inner-door perimeter screws to separate the console from the inner panel
• Note and transfer any reusable parts from the old console as required; make secure, straight ribbon/harness connections
• Reassemble the door, restore power, and run a quick function check before final tightening

This electronic control module replaces the oven/range control board that manages user inputs, timers/clock and heating cycles so the appliance responds correctly and restores control functions. What it does:

• Receives inputs from the front console and controls bake, broil, timers and display functions
• Regulates oven cycles and relays commands to power components (elements, ignitors, fans)
• Common symptoms of failure: unresponsive touchpad/controls, blank or erratic display, oven not heating or not following selected cycles
• Replacing a faulty module often resolves intermittent operation and control-related error codes

• Disconnect power to the appliance before starting any service to avoid shock or injury
• Access typically requires removing the console or control panel; handle the board and connectors carefully
• Avoid touching circuitry or terminals; ground yourself to reduce static risk
• Follow the appliance service manual and wiring diagrams

The Timer is an OEM part for GE dishwashers. It regulates the various cycles of the dishwasher, such as washing, rinsing, and drying, ensuring each phase occurs for the appropriate amount of time.

Causes of a bad timer can include electrical failures, wear and tear over time, or mechanical issues that disrupt the timer's ability to accurately control the dishwasher's cycles. A malfunctioning timer can result in incomplete washing or rinsing, affecting the dishwasher's overall performance.

Symptoms of a bad timer include:

• Dishwasher cycles running too long or too short
• Dishwasher not advancing to the next cycle
• Dishwasher stopping mid-cycle
• Inconsistent cleaning results

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Color: Black includes touchpad.

Color: Black

Color: Universal Silver

This control panel is the front console where you select wash cycles and options on the dishwasher. It restores a clean, intact interface and reliable input when the original console is damaged or worn. What it does:

• Houses the dishwasher's user interface area for cycle and option selection
• Transmits user inputs to the electronic control to start and customize cycles
• Replaces cracked, warped, or cosmetically damaged consoles
• Helps with unresponsive or intermittent buttons, stuck keys, or inability to start a cycle when due to a failed console/touchpad

• 1 control panel assembly

• Disconnect power at the breaker before servicing.
• Open the door and remove inner door screws to release the console from the door assembly.
• Support the wiring; disconnect the connector(s) and transfer any reusable trims or hardware from the old panel.
• Install the new panel, reconnect, reinstall screws, restore power, and test all functions.

This control panel is the user-interface assembly on the front of your appliance. It provides the labeled button area to choose cycles and settings and replaces a worn, cracked, or unresponsive console.

• Interfaces with the appliance's main control to register your selections
• Houses the keypad/buttons and cycle/option labels
• Common symptoms include unresponsive or intermittent keys, cracked or warped panel, and worn/peeling labels
• Can help resolve moisture-damaged or sticky/stuck button issues

• Disconnect power at the breaker before servicing
• Support the console while removing screws to avoid straining wiring
• Transfer any brackets, trim, nameplate, or overlay from the original if applicable
• Align tabs and fully seat any ribbon/plug connectors; avoid pinching wires and test operation before final reassembly

This electronic control board is the appliance's central controller, interpreting user inputs and managing power to key components. Replacing a failed board restores responsive controls, proper cycle execution, and reliable overall operation. What it does:

• Interprets keypad or selector inputs and executes programmed functions
• Switches relays to power motors, valves, heaters, and other loads as required
• Drives the display and status indicators; stores and shows diagnostic/error codes
• Monitors sensor inputs to protect the appliance and maintain correct operation
• Common failure symptoms include a blank or unresponsive display, inability to start cycles, erratic operation, or error codes traced to the control

• 1 electronic control board

• Disconnect power to the appliance before servicing; follow all safety precautions
• Handle the board by the edges and use ESD protection to avoid static damage
• Photograph wiring and move connectors one at a time to match original locations
• Some models require a service/diagnostic or configuration step after installation; refer to the unit's tech sheet or service guide

Replacement main control board and tactile board kit restores control and user input when the original electronics or buttons become unresponsive, helping return oven/range controls and display responsiveness. What it does:

• Primary control board: manages the appliance's electronic control functions and communicates with the user interface.
• Tactile board: provides the button interface so touch or press inputs register with the control module.
• Common symptoms addressed: unresponsive or intermittent buttons, unresponsive or blank display, or controls that do not respond reliably.
• Replaces both the main module and its associated keypad in one kit for a matched repair.

• Disconnect power at the breaker before starting any repair to avoid shock or injury.
• Handle circuit boards by the edges and avoid static discharge; use an ESD strap if available.
• Replacement typically requires removing the control panel and unplugging/reconnecting wiring harnesses; keep track of connector locations.

This user interface mounts in the dishwasher door and contains the keypad you press to choose cycles and options. Replacing a failing UI restores responsive controls and reliable communication with the main control so the cycle can start and run.

• Interprets button presses and sends signals to the electronic control to run the selected cycle
• Common symptoms: unresponsive or intermittent buttons, won't start, erratic lights/beeping, or only certain options work
• Issues may stem from moisture intrusion, a worn keypad, or a damaged ribbon connection

• Disconnect power at the breaker before servicing
• Open the door and remove inner-door/console screws to access the UI; support the panel to avoid strain
• Handle the ribbon cable carefully and observe ESD precautions; transfer any clips/insulators from the old part as needed
• Reassemble and test keypad functions before final tightening