Dishwasher Control Panel Lcd Parts

This user interface mounts in the dishwasher door and contains the keypad you press to choose cycles and options. Replacing a failing UI restores responsive controls and reliable communication with the main control so the cycle can start and run.

• Interprets button presses and sends signals to the electronic control to run the selected cycle
• Common symptoms: unresponsive or intermittent buttons, won't start, erratic lights/beeping, or only certain options work
• Issues may stem from moisture intrusion, a worn keypad, or a damaged ribbon connection

• Disconnect power at the breaker before servicing
• Open the door and remove inner-door/console screws to access the UI; support the panel to avoid strain
• Handle the ribbon cable carefully and observe ESD precautions; transfer any clips/insulators from the old part as needed
• Reassemble and test keypad functions before final tightening

This part is a genuine OEM replacement control panel intended for use with dishwasher models.The control panel allows the user to select the desired cycles of the dishwasher. It houses the buttons and the display. The control panel could become broken or start to malfunction over time, which might include the buttons getting stuck or jammed, or the display failing to light up. When replacing any appliance part, the appliance should be turned off and unplugged from power to prevent potentially serious injuries from occurring. This part was manufactured by Whirlpool. This control panel is sold individually. It is intended for use with dishwasher models manufactured by Whirlpool, Maytag, Jenn-Air, Amana, Admiral, Norge, and other brands.

The Control Panel is an OEM part for Frigidaire dishwashers. Located at the front of the dishwasher door, the control panel features buttons and displays that allow for the selection and monitoring of wash cycles. Printed electronic circuits distribute input signals to initiate the appropriate cycle settings.

Causes of a bad Control Panel can include cracked or damaged screens, non-responsive buttons, or failures of internal electronic pathways over time. 

Symptoms of a bad Control Panel include:

• Faulty or unreadable display screens  
• Random cycle activation without input
• Repeated error codes or flashing lights
• Physical damage or loose components  

This genuine OEM Frigidaire part is compatible with some Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models as well.

The Control Board is an OEM replacement part for Frigidaire dishwashers. Located inside the cabinet behind the control panel, the control board utilizes integrated circuits and electronic components to regulate all dishwasher functions. It receives input signals from the control buttons to initiate and monitor the wash cycle. 

Causes of a bad control board can include failures of electronic components over time, voltage fluctuations that cause circuit damage, or moisture infiltration leading to corrosion.

Symptoms of a bad Control Board include:

• Dishwasher fails to start or stops mid-cycle unexpectedly
• Lights or displays on control panel malfunction  
• Inability to select options or cycles
• Complete non-responsiveness of control functions

This board is also compatible with some Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models.

Color: Black

The Dishwasher Front Door Panel is an OEM part for Whirlpool brand dishwashers. Forming the outer surface of the door, this stainless panel provides a protective barrier and the surface for mounting handle components. 

Causes of a bad front door panel can include damage from repetitive closure stresses, impacts from loaded dishes, or cracks developing from regular cleaning chemicals.

Symptoms of a bad front door panel include:

• Cosmetic damage detracting from appearance
• Obstructions preventing proper latching of the door  
• Leaks forming at the door gasket sealing surface

This OEM replacement is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore models. 

This kit replaces both of the dishwasher's primary electronic controls: the main control board and the tactile board. Replacing them together can restore reliable cycle selection and overall operation when control failures occur. What it does

• Main control board directs cycle logic and powers pumps, valves, heater, and sensors
• Tactile board registers button presses and communicates selections to the main control
• Can address erratic lights/tones or cycles that won't advance due to control faults

• 1 main electronic control board and 1 tactile board

• Disconnect power at the breaker before servicing
• Use ESD protection and handle boards by the edges
• Photograph wiring; transfer one connector at a time to the new board
• Fully seat all ribbon/plug connectors; match any jumper/DIP settings to the original if present

This is the factory console assembly for the control area. It replaces a cracked or damaged panel and restores a secure, finished mounting surface so the appliance's knobs and switches stay aligned and operate correctly.

• Houses and supports the timer/controls so they mount securely
• Protects and organizes wiring within the control area
• Restores proper alignment for knobs and switches
• Replaces cracked, warped, or broken consoles that cause loose or misaligned controls

• Disconnect power before servicing; wear cut-resistant gloves when handling sheet-metal parts
• Remove control knobs and any retaining screws; lift off the old console
• Transfer your existing timer/control switches, brackets, and trim to the new console; take photos to document positions
• Reinstall and verify controls move freely and the console is firmly secured before restoring power

Color: Black

Restore your dishwasher's brains with this control assembly. It manages cycle selection and timing so the machine responds to commands, starts reliably, and completes wash cycles without random beeps, stalls, or unresponsive controls.

• Coordinates cycle logic and component operation
• Interprets button/touch inputs from the console
• Drives status indicators or display on applicable models
• Typical symptoms: controls unresponsive, won't start, lights flicker or beep erratically, cycle won't advance

• Disconnect power at the breaker before servicing
• Use anti-static precautions; handle the board by its edges and avoid touching contacts
• Label/photograph wiring; move connectors one at a time and fully seat any ribbon cables/locks
• Reuse existing mounting hardware; ensure correct orientation and secure harness routing before reassembly

This control panel is the replacement console assembly that houses the user controls and front interface. It restores a clean, readable control surface so buttons and settings are easy to see and operate. What it does:

• Replaces a cracked, faded, or damaged control/console panel to restore the appliance's front interface
• Provides the mounting surface and openings for control buttons, knobs, and the display area
• Helps resolve symptoms like unresponsive or sticking buttons, hard-to-read labels, or a loose front console
• Matches the original white finish to maintain the appliance's appearance

• Always disconnect power (unplug or shut off breaker) before starting any repair
• Handle attached wiring and connectors carefully; connectors may be clipped into the console
• Basic hand tools are typically required; keep fasteners and trim pieces for reassembly
• Test electrical components before returning the part

Color: Black

Replacement control unit that manages the appliance's electronic functions, handling cycle timing, user inputs, and control signals to restore normal operation. Fits where the original electronic control board controls cycles and the user interface. What it does:

• Serves as the appliance's primary electronic control board, processing button/keypad commands and sequencing cycles.
• Controls cycle timing, relays, and signals to motors, valves, and heaters.
• Common symptoms of a failing unit: unresponsive controls, cycles won't start or advance, or intermittent operation.
• Does not include peripheral components such as face panels, knobs, or separate display overlays.

• Always disconnect power to the appliance before starting work to avoid shock or damage.
• Handle the board by its edges and avoid touching circuits; wear an anti-static wrist strap if available.
• Verify connector orientation and seat all wiring harnesses firmly; check harness routing before reassembly.

This console cover graphic is the labeled overlay that mounts on the appliance control console, restoring clear, readable control markings and the console's finished appearance for easier control use and improved cosmetics. What it does:

• Replaces faded, cracked, or peeling control labels so settings and icons are legible
• Restores the visible markings around buttons and knobs for accurate operation
• Covers and protects the underlying console surface from everyday wear
• Improves the appliance's appearance by replacing damaged or discolored graphics

• Disconnect power to the appliance before starting any repair
• Typically installs using the console's existing screws or clips; align carefully before fastening
• Handle the graphic by the edges to avoid fingerprints or damage to the printed surface
• After installation, restore power and verify all controls operate and labels align correctly

Color: Black

This control panel replaces a cracked, worn, or unresponsive console so your appliance can reliably accept cycle and option selections again, restoring a clean appearance and smooth button action.

• Provides the interface area for selecting cycles and options
• Houses and aligns user-interface components and mounting hardware
• Protects and routes the UI connector/ribbon, when present
• Restores proper fit and finish on the front/top of the unit
• Typical symptoms: cracked or broken console, buttons binding or sticking, worn labels, or selections not registering when the touchpad is integrated into the console on your model

• Disconnect power to the appliance before servicing
• Remove screws to access the console; note hardware locations and wire/ribbon routing, and use care around sharp edges
• Handle any ribbon/IDC connectors by the stiffener; seat fully and level
• Transfer any reusable clips, brackets, or overlays/nameplates from the old panel; test keys before final reassembly