Dishwasher Foreign Objects Tub Pump Parts

This OEM Replacement Part is a rubber connector with female threads. It is designed to provide a secure connection between the spray arm and the pump in a dishwasher. The connector measures 2-3/4 inches in diameter and 2-1/8 inches in height. This part is crucial to ensuring the proper functioning and efficiency of your dishwasher's spray arm pump.

Over time, the pump connector can wear out or become damaged due to repeated exposure to water, detergent, and high temperatures. This wear and tear can lead to leaks or a decrease in the dishwasher’s performance.

Symptoms of a bad pump connector include:

• Water leaks under or around the dishwasher
• Reduced water pressure during the cleaning cycle
• The dishwasher not draining properly
• Unusual noises during operation

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Note: This connector has female threads. For male threads use WD18X206.

The Sump and Motor Assembly is an OEM part for Whirlpool dishwashers. This part is the pump and motor that circulate water throughout the unit. This assembly ensures that water is efficiently pumped through the spray arms, providing thorough cleaning of dishes.

Causes of a bad sump and motor assembly can include debris buildup, wear and tear from regular use, or damage to the motor or pump components. 

Symptoms of a bad sump and motor assembly include:

• Water leaks under the dishwasher
• Unusual noises during operation
• Incomplete or poor cleaning of dishes
• Dishwasher not draining properly

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Shaft seal included.

The Pump and Motor Assembly is an OEM part for Whirlpool dishwashers. This assembly is responsible for draining water from the dishwasher during the drain cycle and recirculating water during the wash cycle. It works continuously throughout the cleaning process to remove dirty water and reuse clean water.

Causes of a bad pump and motor assembly include failures in the motor that drives the pump or internal clogging/blockages of the pump mechanism. 

Symptoms of a bad pump and motor assembly include:

• Incomplete draining of water at the end of the cycle  
• Leaks or flooded bottom of the dishwasher
• Loud vibrating or grinding noises coming from underneath during the operation
• The dishwasher failing to fill or recirculate water properly

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Due to manufacturer changes, part may differ in appearance and will include two o-rings.

The Volute with Seal is an OEM part for Whirlpool dishwashers. This part directs water flow within the dishwasher's pump, ensuring efficient circulation and pressure during the wash cycle. The seal helps to prevent leaks by maintaining a tight closure between the volute and other pump components.

Common causes of a bad volute with seal include wear and tear from regular use, damage from debris or hard water deposits, and seal degradation due to age or chemical exposure.

Symptoms of a bad Volute with Seal include:

• Water leaking from the pump area
• Decreased washing performance
• Unusual noises from the pump during operation
• Visible cracks or damage to the volute or seal

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Restore proper draining with this dishwasher drain pump assembly. It evacuates wastewater at the end of each wash and rinse, helping the tub empty fully so cycles finish correctly and standing water and drain errors are avoided. What it does:

• Drives an impeller to push water from the tub through the drain hose to household plumbing
• Activates during drain segments to clear the tub between and after cycles
• Helps resolve symptoms like water left in the bottom, slow or intermittent draining
• Addresses loud humming or grinding from the pump area and drain-related cycle interruptions

• 1 drain pump assembly

• Disconnect power at the breaker and turn off water before servicing
• Access from the lower front or bottom; place a towel or pan to catch residual water
• Label and unplug the wire connector, release the clamp/retainer, and remove the pump; transfer any model-specific seal or bracket if present
• Seat and align the new pump fully to avoid leaks, reconnect hoses/wires, then test for proper draining

This dishwasher wash impeller mounts on the circulation pump to drive water through the spray arms. A worn or damaged impeller can cause weak spray, poor cleaning, or noise; replacing it restores proper wash pressure. What it does:

• Moves water from the circulation pump through the filter and spray arms for effective cleaning
• Maintains proper wash pressure and spray action during the cycle
• Common fix for poor cleaning, spray arms not turning, or weak/no water circulation
• May reduce grinding or rumbling noises caused by broken or stripped impeller blades

• Includes 1 wash impeller

• Disconnect electrical power and shut off the water supply before servicing
• Remove the lower rack and spray arm; take off filters/sump cover to access the impeller
• Note impeller orientation; transfer any spacers as found and secure the impeller without overtightening
• Reassemble, check for leaks, and verify spray arm rotation after a test cycle

Restore consistent wash performance with this motor rotor. It fits the dishwasher's circulation pump assembly and works with the stator to spin the impeller, circulating water through the spray system during wash and rinse cycles.

• Couples with the stator's magnetic field to drive the wash motor
• Spins the impeller to move water through spray arms
• Wear or damage can cause no wash action or weak spray/poor cleaning
• May help address humming, grinding, or intermittent motor operation

• Disconnect power and shut off water supply before servicing
• Access the sump/motor area from the bottom/front; remove pump cover and impeller to reach the rotor
• Note orientation; handle the magnetic/ceramic surfaces carefully to avoid chipping
• Inspect the impeller, shaft seal, and bearings while open; reassemble and test for leaks and proper circulation

This part is a replacement pump and motor assembly that is intended for use with compatible dishwasher models.The sump and motor assembly are responsible for moving water from the sump collection area to the appliance's spray arms. This is critical for making sure that the dishes can be properly cleaned. This assembly includes multiple parts required for replacing the entire sump and motor system. Make sure that the dishwasher has been unplugged from the power outlet as well as disconnected from the water source before making any repair attempts. This is a genuine OEM part manufactured by Whirlpool and has been sourced directly from the manufacturer. It is sold individually. This part is compatible with several different dishwasher models manufactured by Whirlpool, Maytag, Jenn-Air, Amana, Admiral, Norge, and some other brands.

The Sump Cover and Filter is an OEM part for Frigidaire dishwashers. Located inside the bottom of the tub, it seals off and protects the drainage sump where debris collects after each wash cycle. The attached mesh filter screens out particles that could otherwise clog drain lines.

Causes can involve mineral buildup that blocks the filter mesh over time, cracks in the plastic housing exposing the sump, or a missing or damaged filter that fails to trap solids.

Symptoms of a bad sump cover and filter include:

• Standing water inside the bottom of the dishwasher tub
• Reduced drainage or water removal after cycles complete
• Floating debris trapped near the drain pump area

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
 

The Sump Inlet is an OEM part for GE dishwashers. This part allows water to flow into the sump area, which collects and drains used wash water from the tub during the dishwashing cycle.

Causes of a bad part can range from clogs or obstructions preventing proper water flow, physical damage or cracks leading to leaks, or general wear and tear over time.

Symptoms of a bad Sump Inlet include:

• Failure of the dishwasher to fill with water
• Water leaks or puddling around the base of the dishwasher
• Excessive noise or gurgling sounds during operation

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This circulation pump and motor assembly drives water through the spray arms during the wash and rinse cycles. Replace it to restore proper wash performance when the dishwasher fills but doesn't spray, cleans poorly, or runs loudly. What it does:

• Circulates water from the sump through the spray arms for cleaning and rinsing
• Also called the wash motor; provides the pressure needed for effective spray
• Typical failure symptoms: poor cleaning, no spray or weak spray, loud humming/grinding, or leaks at the pump area
• Restores normal water circulation and wash pressure

• One circulation pump-and-motor assembly

• Disconnect power and shut off water supply before servicing
• Access from the bottom/front of the unit; expect residual water—protect floors and wiring
• Move wiring and hoses carefully; transfer any clamps, seals, or brackets from the original as needed
• Ensure seals are seated, reconnect hoses/wiring, then run a short cycle and check for leaks

This is a pump and motor assembly that has been manufactured by Whirlpool for use with dishwashers. The pump and motor assembly are critical, as it's what pumps the water through the dishwasher spray arms and onto the dishes during the wash cycle. Without the pump and motor in working order, the user may notice dishes coming out dirty, even after a full cycle is complete. Make sure to disconnect the appliance from power and water and wear gloves before attempting any repairs.As a genuine OEM part, this part has been sourced directly from the manufacturer and is only sold individually. This pump and motor assembly is manufactured from high-quality and durable materials to ensure sturdiness and reliability. It is intended for use with dishwashers manufactured by Whirlpool, Maytag, Kitchenaid, Jenn-Air, and Magic Chef.

The Pump & Motor is an OEM replacement part for Whirlpool dishwashers. As the main component for water circulation, it contains both the water pump and motor required to power it.

Causes of a faulty pump & motor assembly can include bearing or seal failure from prolonged use, dried pumps from excess mineral build-up, or stuck/jammed impellers no longer spinning freely.

Symptoms of a bad pump & motor include:

• Inability to fill with water or drain properly
• Noisy rattling sounds coming from inside the machine
• Failed or incomplete wash cycles
• Leaks developing around the pump area

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

This wash pump kit restores the main circulation in P2B-platform dishwashers, moving water through the spray arms for effective cleaning. Replace a failed or noisy pump to bring back consistent wash performance.

• Circulates wash water through the spray arms during wash and rinse cycles
• Maintains proper spray flow for reliable cleaning results
• Replaces a seized, weak, or noisy circulation pump
• Typical symptoms: poor cleaning, weak/no spray, loud humming or grinding, or leaks near the pump area

• Disconnect power at the breaker and shut off the water supply before servicing
• Remove the toe kick and slide the dishwasher out as needed to access the pump from below
• Keep towels or a shallow pan ready; disconnect wiring and hoses carefully, comparing parts and transferring any model-specific clamps or seals as required
• Restore power and water, check for leaks, and run a test cycle to verify operation