Need Help?
Call or text
Complete idler pulley assembly with bracket, roller, and hardware. Replaces worn, squeaking, or damaged pulley components. Maintains belt tension.
I bought the new arm assembly because after a few times of going in through the front of the machine and reaching in the back under the drum I could get to the pulley, so I took it off of the arm and lubed it and then replaced it back inside, put the belt back on and it was good for a week or so , then started squeaking again. So after doing this about 6 times I got the impression that is was the wheel and shaft on the arm were worn out causing the wheel to wobble and wear the arm. I then... Read more
Protective cover for your dryer's lint trap that prevents objects from entering the vent. Replace if cracked or broken. Snaps into place. Confirm fit.
Just snapped and slid it into place, very simple. Read more
Guides and secures the lint filter in place within your dryer. Replace if cracked, broken, or missing to properly hold the lint screen assembly.
I have order three parts, guide filter, cover guide, and sensor assembly. My previous cover guide was from two parts, when sensor assembly was one of them. New part ( guide cover ) was all in one piece so I just transfer old metal part of sensor to new cover guide and I don't need that sensor assembly anymore. I have ordered all three parts overnight by Fedex, ordered 15 min before 5pm, so next day it was here. Dryer is fixed, I'm happy. Read more
The bearing retainer secures the drum bearing assembly in your dryer. Replace if cracked, broken, or worn to restore proper structural support.
A few months back I changed out the "Bearing Slides" on the front side of the drum thinking that would stop the annoying squeaking every time we use the dryer. They were very worn and one was missing. But to my dismay it only lessened it by about 10%. After doing a bit more research I discovered the "Rear Shaft Bracket Assembly" also needed replacement. The tip was worn way down and clearly the source of the noise. It was actually a very simple repair except for the fact that the key to the... Read more
Secures the moisture sensor inside your dryer drum. Replace if the holder is cracked, broken, or missing to restore proper sensor positioning and function.
We called a repairman out who was rude, obnoxious and seemingly incompetent. After an hour of dissembling our dryer, he quickly slapped it back together and told us it would be $200 to fix. No other explanation. We sent him on his way and I found your site, found the ($5) part and watched the 5 min repair video. Ordered the part and had it in our hands in less than 48 hours. I had the dryer repaired in 20 min. Saved us a lot of money and made me feel pretty good about my own normally meager... Read more
Supports the drum bearing in your dryer, allowing smooth drum rotation. Replace if cracked, broken, or worn to restore proper drum support and operation.
I watched the helpful diy video. It gave me what the problem was and the confidence to do it. Took my dryer apart with the helpful hints in the video repair went smooth. Works like a dream and I saved money. Thank you appliance parts pros. Read more
Secures the door hinge to the cabinet, preventing wobble and sagging. Replace if bent, stripped, or missing to restore proper door alignment and closure.
Replaced several hinge parts. Read more
Structural bracket that secures the rear panel to the washer chassis. Replace if cracked, broken, or missing to restore proper alignment and cabinet stability.
In the end, with a new coupler. But I relearned old lessons the hard way. The washer is in a rental unit and the tenant complained of no spin. My first intuition was that the coupler failed again because I bought a cheaper one elsewhere a couple of years ago and not the brand name available here at AppliancePartsPros. But we’ll come back to that. Lesson #1: Verify the symptoms firsthand. I dug in right away, popped out the motor and the coupler appeared okay. When I spun it by hand, it turned... Read more
Secure brackets and hardware for stacking a dryer on top of a front-load washer. Needed when vertically installing units to save floor space.
No one locally had any stack kits, nor could they tell me if it was even possible to stack appliances of differing models. Your technician took the time to help solve the problem. The stack kit fits perfectly. Read more
Securely mounts your dryer above your washer to save floor space. Includes brackets, adhesive pads, and hardware for safe installation. Replaces lost kits.
I ordered a stack kit according to the model numbers on the washer and dryer and the kit worked perfectly. My washer and dryer are now stacked and I am extremely satisfied with how easy it was to order from this website and the quick delivery of my part. Thank you! Read more
Secures and positions the dryer motor assembly. Replace if bent, broken, or missing to restore proper motor alignment and drum support in your dryer.
Water inlet valve was not supplying water to ice maker. The water inlet valve is not available/DA-03150A. Samsung was no help. Appliance Parts Pros said that part DA 81-05997A was the replacement part. This part includes the entire housing that the water filter and water holding bottle are housed in, and of course, the water inlet valve. After resetting the ice maker it started to produce ice cubes in about 12 hours. Read more
Bonds dryer cabinet to ground point for safe operation. Replace if damaged, broken, or missing to restore proper electrical grounding and reduce shock risk.
Base bracket that holds the leveling foot at the washer cabinet. Replace if cracked, broken, or missing to restore stability and prevent rocking or vibration.
Adapter brackets for mounting washers to pedestals. Replaces missing or broken original mounting hardware. Ensures secure attachment between unit and stand.
Because of the design of the plates holding my LG dryer on it's pedestal (screws on the pedestal and two face tape on the dryer end of the plates), I needed to order a set of replacement plates. The installation was straight forward for the most part. First I would bend back a small corner of the protective cover on the two face tape to make it easy to remove. Then I would attach the plate to the pedestal using the required 2 screws started in the associated holes, only starting the... Read more
Structural bracket that supports interior shelf or drawer legs in your washer. Replace if cracked, broken, or missing to keep shelves level and stable.
Stacking kit with brackets and hardware to securely mount a dryer on top of a front-load washer. Replaces cracked, broken, or missing stacking kits.