Refrigerator Ice Crusher Motor Parts

With screwdriver. Read more

This was a two and half year issue as different things failed at different times. I would get one part, then another would fail. Ultimately, I got to a point where what failed, I hadn't been ordered the part yet. The seal on the freezer door took three bathing's before it plumped up and un-creased. The directions on the box it is shipped in said to heat the seal up in hot water then cool it down with tap water. I didn't need to do that. It took a lot of massaging of the seal, but... Read more

After searching for information, the best guess was a defrost problem, so I first fully defrosted and reset the ice maker (this is the recommendation of Samsung and others on the net). This did not fix the problem. Next best guess was water fill valve, but after removing ice maker from fridge, determined it had cubes in it but would not eject. So, finally decided to order replacement ice maker. If you search the next for this model (DA97-13178A) there are instructions for removal of the ice... Read more

• Ice maker dispenses too much ice

Replaced the housing Read more

Replacement fan assembly with motor Read more

I ordered a replacement ice bucket with auger. Read more

• Ice maker dispenses too much ice
• Ice maker not making ice

Purchased both the ice maker assembly and the valve assembly to replace the parts as needed. replaced the ice maker assembly first, and this fixed my problem. Took about 10 minutes, mainly because I didn't watch the YouTube video first. Had I watched that, it would have probably taken even less time. One Philips head screw driver is all you need. Read more

Ordered replacement which was a perfect fit. Read more

I bought the listed condenser fan motor for my Maytag refrigerator. Access to the condenser fan is by removing sheet metal screws of bottom panel with 1/4 in. nut driver. Condenser fan is on left side of rear access area. Remove electrical connector by pressing-in connector release tab with thumb fingernail and pulling on connector. Remove three mounting screws with 5/16 nut driver. Work fan out to the right past the compressor. I used a pair of pliers, as a lever, behind the plastic fan blades... Read more

Very easy. Video on the AppliancePartsPros website made it a no brainer. Very helpful. Read more

I first thought it was the auger in the ice container so I changed it and it was not the problem. I then talked to ApplianceParts customer service that it might be the yoke on the motor that turned the auger or even the motor itself even though it worked. I ordered the parts, the yoke was supposed to be able to be changed by itself but mind would not come off the motor shaft so I had to cut it off just to remove it from the unit so I had to change the motor anyway because of this. So I advise... Read more

We bought a new ice guard and installed it. It is working really good now. Read more

• Ice maker not making ice
• Ice maker dispenses too much ice

Replaced with new assembly and still did not work. Was waiting on repairman and decided to unplug the refrigerator as a reboot. After one minute of no power the reset button worked and now it makes ice. Not sure what fixed it except reboot. Read more

• Ice maker dispenses too little ice
• Ice maker won't dispense ice

Plastic drum was broken and wasn't pushing the ice through the crusher teeth. Received my part pronto and made the repair. Was an easy fix, took about 15 min from start to finish. Everything working very good now. ( : Thanks for getting the parts to me so fast. I will definitely remember Appliance Pro if I need parts in the future. Read more

• Fridge too warm
• Doesn't shut off
• Noisy

The blower motor that circulates air through the refrigerator was broken. I had to remove all the shelving and drawers from the refrigerator. Then I had to remove the plastic light cover from the center of the fridge. Then I removed all visible screws to uncover the evaporator/radiator. I then unplugged the light bulb and motor wires. Luckily all wiring is keyed so that it can be plugged in again without error. I removed the motor by opening the motor housing. The housing has 1 screw and... Read more

Vacuumed out coils on the condenser. Read more