Refrigerator Control Panel Lcd Parts

This is the mechanical cold-control thermostat for the freezer. It senses temperature and switches the cooling system on and off to maintain your selected setting, restoring steady freezer temps and normal compressor cycling.

• Regulates freezer temperature by opening/closing electrical contacts to control cooling
• Symptoms of a failing control include freezer too warm or too cold
• Unit runs constantly, won't start, or won't shut off at set point
• Temperature knob feels unresponsive or no distinct "click" when turned

• Disconnect power before servicing
• Access the control housing; note wiring and transfer leads one at a time
• Route the sensing tube exactly as original; do not kink, pinch, or cut it
• Set to a mid setting after install and allow up to 24 hours for temps to stabilize

The defrost timer governs the automatic defrost cycle, periodically switching the refrigerator from cooling to defrost. Replacing a failed timer restores reliable defrosting to limit frost buildup and help maintain steady, consistent temperatures. What it does:

• Advances the system through run and defrost periods at set intervals
• Sends power to the defrost heater during defrost, then returns the unit to cooling
• A failed timer may cause heavy frost on the evaporator, poor cooling, or continuous running
• A timer that does not advance or is stuck can leave the refrigerator in defrost or prevent defrost entirely

• 1 defrost timer

• Disconnect power before servicing
• Access location varies by model
• Photograph wire positions; move wires one at a time to the matching terminals on the new timer
• Transfer any mounting bracket, secure the timer, and restore power to verify operation

This main power control board is the appliance's central electronic module. It routes incoming power and coordinates key functions so the unit powers up, runs, and responds to controls as designed, restoring reliable operation when the original board fails. What it does:

• Distributes and regulates power to motors, valves, and other loads
• Processes inputs from sensors and user controls, switching relays/triacs accordingly
• Coordinates start-up and run cycles for consistent performance
• Typical symptoms include a dead/unresponsive unit, intermittent shutoffs, specific components not running, or visible heat damage on the board

• 1 main power control board

• Disconnect power before servicing; discharge any capacitors where applicable
• Use ESD protection and handle the board by the edges
• Photograph/label all connectors; transfer any jumpers or settings from the old board to the same positions if present
• Inspect wiring and connected components for shorts before restoring power

This flip-up dairy door covers the refrigerator's dairy compartment. Replace a cracked or missing cover to keep butter, cheese, and other small items organized and protected while restoring a clean, finished look to the fresh food door.

• Attaches to the dairy bin on the fresh food door and flips up/down for access
• Helps keep contents contained and protected during door opening/closing
• Restores proper hinge/latch engagement so the bin stays closed
• Common symptoms: cracked cover, broken hinge tabs, loose hinge, or missing door

• Empty the dairy bin and remove the old cover
• Align hinge tabs with the bin's pins and snap into place; no tools typically required
• Handle carefully; if very cold, let the plastic acclimate to room temperature before installation
• Open and close to confirm smooth operation and full seating

Color: clear. Measures about 11 inches wide by 7 inches high.

This replacement guide aligns and supports a moving component so it travels on its intended path without binding. Replacing a worn or broken guide restores smooth operation and helps prevent scraping, jamming, or premature wear of connected parts.

• Keeps the associated rack, drawer, or panel centered and properly aligned during movement
• Provides a track/stop for the mating part to follow
• Reduces friction and noise for smoother sliding
• Typical failure signs: sticking, uneven travel, scraping noises, or visible cracks/broken tabs

• Disconnect power; also shut off water or gas
• Remove the associated assembly to access the guide and note its orientation
• Reuse original screws/clips and tighten securely without overtightening
• Test movement after installation; replace worn mating rails or rollers if needed

The Cold Control is an OEM part for Frigidaire refrigerators. This component regulates the temperature inside the refrigerator by controlling the operation of the compressor and the flow of refrigerant. It ensures that the interior remains at the desired temperature to keep food fresh. This temperature control thermostat features a 16" capillary tube. 

Over time, the cold control can become faulty due to regular wear and tear, electrical issues, or exposure to moisture. A malfunctioning cold control can result in temperature fluctuations and ineffective cooling.

Symptoms of a bad cold control include:

• The refrigerator not maintaining the correct temperature
• The compressor running continuously or not at all
• Frost buildup in the freezer compartment
• The refrigerator being too warm or too cold

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

This control board is responsible for controlling the main electronic functions of the refrigerator. It monitors and manages the temperature and cooling settings of the appliance. Models that are compatible with this part can have the temperature adjusted digitally. If a control board is damaged or faulty, the set temperature of the appliance will not match the actual temperature reading the machine is putting out.To install this control board, open the refrigerator door, and make a note of the small white box on the ceiling area of the refrigerator. Remove the four screws holding this box in place. The control board is contained in the box and can be removed by popping the clip. Unplug the old board from the wiring harness and install the new one.This Whirlpool refrigerator control board is a genuine OEM part and is sourced directly from the manufacturer. It is compatible with Whirlpool, Maytag, Kenmore, and Magic Chef appliances.

This is an electronic control board for refrigerators. It's an internal component that ensures the refrigerator runs correctly at all times. The electronic control board is used to manage temperatures, defrosting times, and other features in the refrigerator. If this part is damaged or worn, it may cause cooling issues, prevent the appliance from working, or cause erratic behavior. In some cases, it will also make a whistling or clicking noise.If the electronic control board is malfunctioning, it will need to be replaced. Tools needed include a Phillips screwdriver, flathead screwdriver, and needle-nose pliers. A pair of work gloves can also be useful to protect the hands. Before starting work with the control board, unplug the refrigerator or turn off the circuit breaker. Locate the control board cover, remove the screws, and take off the cover. Detach the wires and take out the electronic control board. Replace the wires in the appropriate places on the new board and install it into the refrigerator.This is an authentic OEM replacement electronic control board. It's sourced directly from the manufacturer and designed for use with refrigerators by Maytag, Whirlpool, KitchenAid, and Kenmore. This component is sold on an individual basis.

The Mullion Heater is an OEM part for Bosch refrigerators. It is designed to prevent condensation from forming on the refrigerator door mullion, the vertical divider between the doors. This heater ensures that the mullion stays warm enough to stop moisture from condensing and causing potential water damage or mold growth.

Causes of a bad mullion heater can include electrical failures, wear and tear from continuous use, or manufacturing defects.  

Symptoms of a bad mullion heater include:

• Visible condensation or frost on the door mullion
• Water pooling or dripping around the door area
• Increased humidity inside the refrigerator
• Mold or mildew developing near the door seal

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This is the vertical flipper mullion assembly that mounts to one fresh-food door and pivots closed to seal the center gap when both refrigerator doors are shut, helping maintain proper temperature and energy efficiency.

• Creates the center seal between French-door refrigerator doors
• Helps prevent warm air infiltration and moisture/condensation in the fresh-food section
• Common failure signs include a loose or broken hinge, mullion not staying aligned, condensation at the door center, or doors not sealing properly
• May also be noted if doors pop open or temperature fluctuates in the refrigerator compartment

• Unplug the refrigerator before servicing
• Remove door bins to access mounting screws/clips
• Transfer any original covers or hardware if not part of the new assembly
• Verify proper hinge engagement so the mullion flips and seals smoothly before restoring power

This defrost timer controls the automatic defrost cycle in select refrigerators and freezers, switching between cooling and defrost to clear frost on the evaporator. It helps maintain stable temperatures and prevents heavy ice buildup and long run times. What it does:

• Alternates the system between cooling and defrost on a timed schedule
• Sends power to the defrost heater during defrost, then returns power to the compressor and fans
• Failure can cause heavy frost on the evaporator/back freezer wall
• May lead to warmer temperatures, constant running, short cycling, or no-cool if stuck in defrost

• 1 defrost timer

• Disconnect power before servicing
• Access location varies by model
• Note wire positions and transfer them one at a time to the new timer
• Mount securely in the same orientation as the original and verify normal cycling after power is restored

This refrigerator temperature control board regulates cooling by reading sensor inputs and directing the compressor, fans, and defrost cycle. Replacing a failed board helps restore accurate temperatures and responsive controls.

• Monitors temperature sensors and maintains set points
• Controls the compressor, fans, and defrost cycle as designed
• Interfaces with the temperature buttons/display where equipped
• A failing board can cause drifting temps or no cooling, unresponsive controls, or intermittent cycling

• Disconnect power before servicing and verify no voltage is present
• Use ESD protection; handle the board by the edges only
• Photograph wiring; move keyed connectors one at a time and seat fully
• After installation, restore power and allow up to 24 hours for temperatures to stabilize; follow any model-specific setup on the service sheet

This main power control board assembly is the unit's central electronics module. It routes incoming power and coordinates the compressor, fan, and other loads so operation stays responsive and reliable when the original board fails from age, heat, or electrical surges.

• Distributes power to major components
• Interprets signals from the user interface and sensors to control operation
• Switches onboard relays and manages safety/logic for start-up and cycling
• Common symptoms include no power/display, unresponsive controls, won't start, runs but won't cool/dehumidify, or intermittent shutdowns

• Disconnect power and allow any capacitors to discharge before servicing.
• Access the electronics compartment; note wire locations and transfer connectors to the new board one at a time.
• Use ESD precautions; handle by edges and avoid flexing the board.
• Confirm all plugs are fully seated and reassemble before restoring power.

The Refrigerator Main Control Board Assembly is essential for maintaining the optimal performance of your Samsung refrigerator. This genuine OEM part ensures precise control over all the refrigeratorGÇÖs functions, including temperature regulation, cooling cycles, and defrosting processes. Designed specifically for Samsung refrigerator models, it guarantees a perfect fit and seamless integration with your appliance. Installing the main control board assembly can resolve issues such as inconsistent cooling, error codes, or unresponsive controls, restoring your refrigeratorGÇÖs reliability and efficiency. Made from high-quality components, this assembly delivers long-lasting performance, helping you avoid frequent repairs and extend the life of your appliance. Choosing this genuine OEM part ensures you receive a product that meets SamsungGÇÖs exact specifications, providing peace of mind and a smoother user experience. Enhance your refrigeratorGÇÖs functionality and enjoy the benefits of a well-regulated cooling system with the Refrigerator Main Control Board Assembly .

Color: clear. Measures about 13 inches wide by 5 inches high.