Washer Cold Pump Hose Parts

This drain hose carries used water from your appliance to the home drain during and after the cycle. Replacing a damaged or clogged hose restores proper draining and helps prevent leaks and standing water.

• Routes wastewater from the appliance outlet to the household drain
• Maintains a sealed, unobstructed path for efficient draining
• Helps prevent leaks from splits, brittleness, or loose connections
• Commonly resolves slow/no drain, water left in the tub, or water backing up
• Visible kinks, cracks, or blockages in the hose indicate replacement is needed

• Disconnect power and shut off water supply before servicing
• Place a towel or shallow pan to catch residual water when removing the old hose
• Note original routing and clamp locations; avoid kinks or sharp bends during install
• Fully seat and tighten connections, then run a brief drain to check for leaks

This dishwasher drain pump assembly actively removes wastewater from the tub and pushes it through the drain hose at the end of each cycle. Replacing a weak or failed pump restores proper draining and helps prevent standing water and odors.

• Pumps water out of the dishwasher during drain cycles and sends it through the drain hose to the sink/disposal
• Common symptoms: water left in the tub after a cycle
• Humming or buzzing from the pump with little/no water movement during drain
• Drains slowly, intermittently, or triggers a drain-related error
• Visible damage or a seized/broken impeller on the original pump

• Disconnect power and turn off water supply; protect the floor from spills
• Remove standing water and check the drain hose/sump for blockages before replacing the pump
• Access the pump from the base/front; release the lock (twist or tabs, per model) and transfer the wire connector
• Seat the new pump fully to seal; reconnect, then run a short cycle to check for leaks and proper draining

The Pressure Switch Hose is an OEM part for Whirlpool washing machines. This hose connects the pressure switch to the washer tub, allowing the machine to detect water levels and ensure proper operation of the washing cycle.

Common causes of damage include cracks, holes, or clogs in the hose, which can occur due to wear and tear, exposure to harsh detergents, or foreign objects in the washing machine. 

Symptoms of a bad pressure switch hose include:

• The washing machine not filling properly
• Overfilling or underfilling of water
• Error codes related to water levels
• The washer not advancing through cycles correctly

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Pump-Water is an OEM part for Whirlpool washers. It is responsible for circulating water through the washing machine during all cycles. The pump draws water from the tub and dispenses it through the water supply hoses to soak, scrub, and rinse clothes.  

Symptoms of a bad pump include:

• Failure to fill or drain the washer
• Abnormal noises coming from the pump area 
• Slow or inefficient filling and draining
• Water leaks from around the pump area

Over time, the pump motor can fail or its impeller can become clogged due to mineral buildup or other debris. Replace yours today with this genuine OEM Whirlpool part to restore your washer's washing ability. 

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

The Water Pump is an OEM part for Whirlpool laundry machines. It is responsible for circulating water into and out of the washer during rotation cycles. The pump is designed for reliable and high water pressure output to effectively wash clothes. 

Symptoms of a bad water pump include:

• Reduced or no water filling the washing machine tub
• Loud buzzing or grinding noises coming from the pump motor area
• Does not enter or remain in agitation cycles properly 

Causes of a bad water pump can be wear and tear over time, blockages that reduce water flow, or failure of electronic components that control the pump.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Size: 48 inches long. Clamp included. For 21 inch extension use 285702.

Restore proper draining with this complete drain pump assembly. It moves water out of the washer during the drain and spin portions of the cycle to prevent standing water, cycle interruptions, and musty odors.

• Pumps wastewater from the tub to the household drain
• Helps prevent standing water and cycle pauses
• Common symptoms: won't drain or drains slowly, humming or grinding from the pump area, leaks at the pump, drain-related error codes
• Direct replacement for a failed or noisy pump assembly

• Disconnect power and shut off water before servicing; have towels or a pan ready for residual water
• Access location varies by model; remove the appropriate lower/front/rear panel to reach the pump
• Transfer wiring and hoses one at a time to the new pump, matching orientation; securely seat clamps and seals
• Inspect and clear the drain hose and filter for debris before reassembly; run a test cycle and check for leaks

This pump assembly removes wash water from the tub and routes it to the household drain so the washer can complete drain and spin cycles reliably. Designed to restore proper water removal and reduce leak risk when the old pump fails. What it does:

• Forces wastewater out of the tub during drain cycles so the washer can advance to spin and finish cycles
• Helps prevent standing water in the drum that can cause odors or skipped cycles
• Can reduce abnormal noises caused by a failing or clogged pump
• Works with the washer's drain hose and plumbing to maintain proper flow

• One pump assembly

• Disconnect power and water before starting any repair
• Inspect and clear the drain hose and pump inlet before replacing the pump
• Expect basic panel and hose removal; keep screws and fasteners organized
• After installation, run a short drain/spin cycle to check for leaks and proper operation

The Drain Pump Assembly is an OEM part for Whirlpool washing machines. This part is responsible for removing water from the washer during the drain cycle. 

Causes of a bad drain pump assembly can include blockages from debris, wear and tear on the pump motor, or damage from objects accidentally left in pockets.  

Symptoms of a bad drain pump assembly include:

• The washer not draining water
• Water remaining in the tub after a cycle
• Unusual noises during the drain cycle
• Error codes related to draining issues

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Washer Fill Hoses are OEM parts for various washing machines, specifically designed to transport hot and cold water from the home's supply lines to the washer. These hoses are essential for the proper functioning of the washing machine, ensuring a steady and reliable flow of water during the wash and rinse cycles. Coming in packs of 2, each hose measures 5 ft.

Causes of bad washer fill hoses can include wear and tear over time, exposure to high water pressure, or damage from kinks and bends. Additionally, hoses can deteriorate due to exposure to harsh water conditions or chemical buildup.

Symptoms of bad washer fill hoses include:

• Leaks or puddles around the washing machine
• Reduced water flow into the washer
• Visible cracks or bulges in the hoses
• The washer taking longer than usual to fill with water

These washer fill hoses are compatible with a variety of washing machine brands and models, ensuring a secure and efficient water supply.

The Internal Drain Hose Asm is an OEM part for GE washers. It is the hose located inside the washer that channels drained water from the tub out to the external drain system. 

Proper drainage is essential for washer operation. Causes of a bad internal hose can include cracks, kinks, or holes developing over time, especially in hoses made of brittle plastic material. Mineral buildup can also obstruct flow.  

Symptoms of a bad Internal Drain Hose Asm include:

• Puddling or pooling of water inside the washer tub after cycles
• Water not fully draining or draining slowly from the tub  
• Leaks or wet surroundings near the back of the washer

This GE replacement hose ensures your washer continues draining efficiently. This is also compatible with Hotpoint, RCA, and some Kenmore models.

This water pump assembly circulates water through the appliance during active cycles. It restores proper water movement when the original pump becomes weak, noisy, or fails, helping maintain consistent washing performance and coverage. What it does

• Circulates water through the internal system as designed
• Helps distribute detergent and cleaning action evenly
• Symptoms of a failing pump include little/no water movement and poor wash results
• May produce loud humming/grinding from the pump area or show small leaks
• Some models may display error codes related to water circulation

• 1 water pump assembly

• Disconnect power and shut off water before servicing
• Access location varies by model; remove panels as needed and prepare for residual water
• Transfer hoses and clamps to the new pump; ensure tight, leak-free connections and correct orientation
• Reconnect wiring securely, then run a test cycle and check for leaks

The Hose Assembly & Connector is an OEM part for LG washing machines. This assembly includes the hose and connector, which are essential for supplying water to the washer during operation, ensuring a steady and reliable flow.

Causes of a bad hose assembly and connector can include wear and tear over time, cracks or splits due to pressure or temperature changes, and damage from improper installation or handling. 

Symptoms of a bad Hose Assembly & Connector include:

• Water leaks from the hose or connector
• Low water pressure or flow to the washer
• Visible cracks or splits on the hose
• Water not entering the washing machine properly

This OEM LG part is also compatible with some Kenmore models.

The Dispenser to Tub Hose is an OEM part for Frigidaire washing machines. This hose is responsible for transporting detergent and other cleaning agents from the dispenser to the tub during the wash cycle.  

Common causes of a bad hose include constant exposure to water and detergent, which can lead to wear and tear, blockages from detergent buildup, or physical damage such as cracks and splits.

Symptoms of a bad dispenser to tub hose include:

• Water leaks near the detergent dispenser
• Uneven or insufficient distribution of detergent
• Visible cracks, splits, or other damage to the hose
• Error codes on the washing machine related to water flow

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Water Pump is an OEM component for Whirlpool front-loading washing machines. As an important internal component, this pump circulates water to flush away dirt and debris during wash cycles. It works in conjunction with the wash arm and impeller to properly distribute cleaning water.

Symptoms of a bad water pump can include: 

• Ineffective or inadequate washing even on high water level settings  
• Abnormal noises or vibrations coming from inside the machine
• Water failing to enter or drain from the tub as it should
• Leaks developing inside the washer cabinet

Causes such as mineral buildup on pump components, worn seals or bearings, and damage from foreign objects can impair proper pump operation over time.

This OEM Whirlpool part works to ensure wash water is properly circulated and soil is sufficiently flushed away with each cycle. It is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Drain Pump Assembly is an OEM part compatible with LG dishwashers. It is responsible for pumping water out of the dishwasher during the drain cycle. Located at the bottom of the tub, the drain pump works continuously throughout the cycle to remove dirty water and debris.

Symptoms of a bad drain pump assembly include:

• Incomplete or slow draining of water at the end of cycles
• Standing water or flooding at the bottom of the dishwasher tub  
• Loud vibrating or grinding noises coming from the drain pump area
• Poor cleaning performance due to inadequate water removal

Causes of a bad drain pump can be a failed motor, a clogged impeller preventing free spinning, or worn-out seals.

This OEM LG replacement part is also compatible with Sears/Kenmore.