Washer Belt Boot Parts

Replaced the seal. Read more

Replaced the bellow without having to remove any of the panels. Was able to make the repair from the front of the machine by just removing the 2 clamps that hold the bellow seal in place. Read more

We replaced the Tub Seal. Read more

Separated shell and replace oring. Replaced springs and shocks. Read more

I sat an watched a wash cycle. When it came to drain cycle I could hear the pump making a grinding noise! Door bellow seal leaked too. I ordered new pump and housing,new door bellows seal. The clearance of the pump impeller and housing are real important. I have jet Skies and I knew it is an issue. Watched the video on the repair. Gave me all the instructions to take it apart. One thing it did not show. Lube the new seal mating surface with laundry detergent. It went right on. I have never... Read more

Replaced the belt and works GREAT Read more

This was some repair! My SG1000 stackable is over 30 years old and was purchased second hand. I've replaced many parts in the dryer section, but besides a water inlet, this was my first repair to the washer. All of a sudden it started making a terrible noise and was not agitating the clothes. The spin cycle worked fine. I first replaced the two belts on the bottom, but when I removed the old ones I realized they did not look terribly worn and weren't the cause. Many stories on here indicated... Read more

I used the parts recommended by the parts diagram.. Read more

Ordered the part from appliance part pros. Was the right belt to fit my frigidaire affinity washer. I got on you tube for an installation demo. Follow the procedure and replaced it properly. It is now working great. Thanks. Read more

After researching the Internet, I thought the drainage hoses were my problem. First I changed both drainage hoses. That didn’t solve the problem. I had to look for another area that was causing water to drip into the pan. I found water leaking from behind the brake assembly. Since I didn’t get an oE error code, I eliminated the brake assembly as causing my problem. I ordered a brake gasket and cover. Once I got it properly installed, problem solved! Read more

Removed agitator, inner washer barrel, and agitator shaft then drained all the water and emulsified oil out of the transmission. Filled the transmission with new oil and then replaced the worn agitator shaft, shaft collar, shaft o-ring and stem sealing system. Read more

Followed this video: https://www.youtube.com/watch?v=hQ18AD0zDpM - really, really simple job. ...also replaced the rubber door seal (video also on youtube) as the old one was a bit moldy. Read more

I tore into the washer until i found what i thought was the problem which was the upper outer tub splash cover gasket and when i couldnt find one in my town i ordered a new one from u folks and replaced it hoping for the best and was successful. This fix costed me $35 instead of the $400+ for a new washer glad i looked into it instead of discarding it and buying a new one as most may do thanks Read more

• Burning smell
• Will not drain
• Pumps but will not spin

First i had to remove the belt from the drum pulley. i had to actually remove the motor from the washing machine. carefully remove the two water hoses attached to the pump...have a towel ready...there will be a few cups of water left in the hoses. remove spring from tension pulley then remove the pump that was attached to the motor. you will need a set of hex keys to remove the pump. then you can remove the belt from the drive pulley. reinstalled new belt around drive pulley and reinstalled... Read more

Found the wonderful parts diagrams you most generously share online and a couple of YouTube videos . I determined it should be repairable. In my cast the agitator shaft was frozen (rusted) in place. I was very fortunate to have been able to eventually remove it with the use of a lot of BP penetrating oil and heat. Long and short the replacement parts fit perfectly and the washer is running like new. Special thanks to the online support make my repair possible. Read more