Washer Top Load Holder Tape Parts

The High-Temperature Adhesive Tube is an OEM part for Whirlpool appliances. This adhesive is specifically formulated to withstand extreme temperatures, making it ideal for securing components in ovens, dryers, and other high-heat environments. It is commonly used to seal or repair gaskets, felt seals, and other parts that require a durable bond to maintain integrity under thermal stress.

Symptoms of a need for High-Temperature Adhesive include:

• Loose components or seals within high-heat appliances
• Heat escaping from appliance seals
• Unusual noises due to parts shifting that are normally secured

Causes for the use of high-temperature adhesive can stem from normal wear and tear that loosens components or degradation of previous adhesive applications due to prolonged exposure to high temperatures.

This product is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This OEM Replacement Part is an Adhesive designed for use in high-temperature areas of your Whirlpool appliances. Approximately 7.5 inches long, this white adhesive is suitable for securing parts such as grate feet, gaskets, and felt seals. It is especially useful, particularly in hot zones like a cooktop. The heat-resistant properties of this adhesive ensure that the bond integrity remains uncompromised even under high-temperature conditions.

Contained in a 3oz bottle, this adhesive forms a resilient bond between various components. It is commonly used in conjunction with gaskets, felt seals, and rubber feet. The RTV high temp silicone adhesive/sealant guarantees the safety and longevity of your appliance by ensuring a secure fit of parts exposed to high heat.

The High Temperature Adhesive is an OEM part for Frigidaire appliances. This adhesive is specifically formulated to withstand high temperatures and is used in various repair applications within appliances such as ovens, ranges, and dryers.The 1-ounce tube contains adhesive formulated to withstand the extreme heat inside dryer drums and cabinets

Causes of a bad adhesive can include exposure to extremely high temperatures over extended periods, contamination by dirt or grease, or the natural aging and drying out of the adhesive.

Symptoms of a bad high temperature adhesive include:

• Components or parts becoming loose or detached
• The adhesive becoming brittle or cracked
• Inability to properly bond surfaces exposed to high heat
• Visible deterioration or peeling of the adhesive

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Adhesive is an OEM part for Whirlpool appliances, designed for securing and sealing various components within the appliances. This adhesive is ideal for use in situations where a durable and heat-resistant bond is necessary.Size: 2 oz. tube. This silicone rubber adhesive can be used on door gaskets, felt seals, and much more.

Over time, seals and insulation can become loose or detached due to wear, heat, or mechanical action, potentially compromising the appliance's functionality, efficiency, or safety.

The need for this adhesive may become apparent through symptoms such as:

• Loose seals or gaskets that result in heat loss, inefficiency, or the escape of moisture.
• Detached insulation leading to increased noise, heat transfer, or loss of energy efficiency.
• Components that have become unattached, affecting the appliance's performance or structural integrity.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This Washer Lid is an OEM replacement part for Speed Queen washers. It serves as the main cover and provides access to load and unload clothes during washing and rinsing cycles. The lid must be sealed tightly to minimize noise and ensure optimal energy efficiency.

Causes of a bad lid include long-term exposure to heat and moisture during use, impact or other physical damage.

Symptoms of a bad lid include:

• Excessive noise during spinning or agitation cycles
• Long wash times and higher energy bills due to leaks
• Difficulty opening or closing the lid securely
• Warping or bulging appearance

This OEM Speed Queen part is also compatible with American Dryer Corporation and Continental clothes washers.

The Outer Door Panel is an OEM replacement part for Frigidaire washing machines. It serves as a protective barrier for the washing machine's door assembly, safeguarding the internal components and ensuring that the machine operates efficiently. The panel is designed to withstand regular use, providing durability and stability to the entire door assembly.

Causes of a bad Outer Door Panel can include physical impacts leading to dents or damage, wear over time affecting its structural integrity, or issues with the fittings that secure the panel in place. A damaged or compromised outer door panel can affect the machine's ability to operate effectively.

Symptoms of a malfunctioning Outer Door Panel include:

• Visible damage or warping of the panel
• Issues with the washing machine's door closing or sealing properly
• Unusual noises during operation due to a misaligned or damaged panel

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This control panel assembly fits washing machines. This is the housing for the washing machine's controls. It allow the user to select load size, wash type, and other cycle-related factors. The assembly includes multiple parts, as well as the wiring required to connect the control panel to the control module.The control panel can suffer from wear and tear, and may also be affected by an excessive build up of dust. Exposure to moisture and high temperatures may also cause problems. If the panel is damaged, the user will find it difficult to set washing cycles, or the washing machine may be inoperable. To replace the control panel assembly, first disconnect the power, the remove the access panel to locate the mounting screws for the assembly. Disconnect the wiring and install the new assembly.This genuine OEM part is sold individually. It is compatible with Whirlpool, Maytag, Roper, and Kenmore washers.

The Lid Assembly is an OEM part for GE washing machines. This part is the lid of the washer. It is essential for securely covering the washer drum, preventing water from splashing out during the wash cycle, and allowing safe operation by ensuring the washer does not run with the lid open.

Causes of a bad lid assembly can include general wear and tear, physical damage from heavy loads or impacts, or issues with the hinges or latch mechanisms.

Symptoms of a bad lid assembly include:

• Difficulty in opening or closing the lid
• Washer not starting or stopping mid-cycle due to a faulty lid switch
• Visible cracks or damage on the lid
• Water leaking from the top of the washer

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Rear Access Cover is an OEM part for Whirlpool refrigerators. It protects the rear components of the refrigerator, such as the compressor, condenser coils, and electrical connections, ensuring these vital parts are shielded from dust, debris, and potential damage while still allowing for necessary ventilation.

Causes of a bad rear access cover can include wear and tear from prolonged use, accidental impacts that cause cracks or breaks, or damage during maintenance or repairs. 

Symptoms of a bad rear access cover include:

• Cracks or visible damage to the cover
• Difficulty securing the cover in place
• Excessive dust or debris around internal components
• Rattling or noise from a loose cover

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This backsplash assembly is the rear console housing for a washer's controls. It supports and protects the user interface components and finishes the top, restoring a secure, aligned control area when the original panel is cracked or loose.

• Houses and supports the washer's control components and mounting hardware
• Shields wiring and controls from splashes at the rear of the top panel
• Restores proper fit and alignment for knobs, buttons, and overlays
• Common symptoms: cracked or broken console, loose or rattling controls, broken mounting tabs, cosmetic damage

• Disconnect power and, turn off water supply before servicing
• Remove control knobs and screws/clips securing the console; carefully lift the assembly
• Label or photograph wiring and transfer controls/mounting hardware to the new panel
• Reinstall, ensuring all tabs and screws are fully seated; watch for sharp edges

This control panel manufactured by Whirlpool is intended to replace a worn or faulty part in washing machines.The control panel houses all of the buttons, dials, and the display, which allows the user to select the desired washer settings. If the panel is worn, detached, malfunctioning, or otherwise broken, it will need to be immediately replaced to ensure the washing machine can be properly controlled. To make sure that no injuries occur, work gloves should be worn and the washing machine should be completely disconnected from the power and water sources.This is a genuine OEM part sourced from the manufacturer and is compatible with certain washers that have been made by Whirlpool, Maytag, Amana, Admiral, and other brands. This part has been manufactured from high-quality, durable, non-corrosive plastic to ensure the best possible quality and is only sold individually.

This is the factory replacement microwave door assembly. It restores a smooth, secure door closure and proper operation so the unit can open and close reliably and look like new. What it does:

• Provides a complete, aligned door to open/close the cavity smoothly
• Ensures latch hooks engage properly so the appliance can operate
• Replaces doors that are cracked, warped, or have broken handle mounts
• Addresses issues like the unit not starting unless the door is pressed, or stopping when the door is moved
• Helps resolve sparking/arcing around the door opening caused by a damaged door choke or screen

• One door assembly

• Disconnect power at the breaker before servicing; microwaves contain high-voltage components
• For over-the-range units, support or remove the microwave from the wall to safely access and handle the door
• Transfer any reusable hardware/hinge pins/trim from the original door as needed
• Align the hinges and verify the door closes, latches, and opens smoothly before remounting

Size: .20 Fl. Oz. (6 ml)

This replacement top panel restores the appliance's upper surface and protects internal components while giving a clean, finished appearance. Ideal when the factory top is dented, rusted, or otherwise damaged. What it does:

• Covers and protects internal components located beneath the top panel
• Provides a flat, finished surface for user access and controls
• Restores proper alignment and fit where the original top is bent or corroded
• Helps stop drafts, debris, or moisture from entering the cabinet area

• One top panel

• Disconnect power (and gas, if applicable) before starting any repair
• Handle edges carefully; use gloves to avoid cuts
• Reuse mounting hardware only if in good condition; replace damaged fasteners

This top panel is the exterior upper cover that protects internal washer parts and gives the appliance a finished look. It restores a secure mounting surface for the control area and helps keep water and debris out of the cabinet. What it does

• Covers and protects internal components at the top of the washer cabinet.
• Provides the mounting surface and alignment for the control console and lid.
• Restores appearance when the original panel is dented, cracked, or rusted.
• Reduces rattles or vibration caused by a loose or warped top.

• Disconnect power and water supply before starting any repair.
• Use basic hand tools; some screws or clips may need to be removed to lift the old panel.
• Handle edges carefully — metal panels can be sharp.
• Have a second person assist if needed to prevent bending or dropping the panel.

Color: White