Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Seals the gap between tub and door to prevent water leaks. Replace if torn, frayed, or compressed. Confirm fit with your dishwasher model number.
The dishwasher is 4 years old, so I figured since it was leaking from the bottom, replacing the Tub Gasket PN: AP5690109, Splash Shield Kit PN: AP4338941 , and the bottom Door Seal/Gasket PN: AP5809675 was a good idea; the machine probably has around 1200 cycles in 4 years. There's no telling how much the door had opened and closed!? The bottom Door Seal/Gasket was badly worn, and the entire job took me around 30 minutes which included the detailed cleaning of the mating flanges. Take your... Read more
Seals the gap between the dishwasher tub and door bottom to prevent water leaks. Replace if you notice leaking at the door base or visible wear.
Replaces a cracked, broken, or damaged lower spray arm in your dishwasher. Snaps into the bottom sump assembly. Essential for proper water distribution.
Ordered replacement part. came within 6 days , it fit perfectly, and was easily installed. the right fix at a great price, very happy with results Read more
Mounting bracket that secures the lower spray arm to the dishwasher sump. Replace if cracked, broken, or missing to prevent spray arm detachment or tilting.
The fix took 30 seconds. The key to success was your video that explained how reinstalled parts "lock in". Read more
Fixes dishwasher not filling, slow filling, or continuous water flow. Controls water entering the tub. Quick 15-30 minute DIY replacement with basic tools.
Obtained part online from Appliance Parts Pros. com... within one or two days received the part... Replacing the defective part is straight forward... The valve is located on the left underside of the unit. Make sure the electrical power is off and the water supply to the unit is closed off. Disconnect the water inlet piping from the valve... in my case separating a 1/2 inch copper union. Remove the electrical quick connector from the solenoid prongs. The red wire is orientated at the top of... Read more
The Lower Rack Assembly is an OEM part for Frigidaire dishwashers. This rack is designed to hold dishes, cups, glasses and other utensils securely in place on the lower level during the washing cycle.
Causes of a bad lower rack can include warping or bending of wire prongs over time due to heavy loads, corrosion from constant moisture exposure, breakage of plastic parts, or shearing off of roller components. Heavy pots and pans can put significant strain on the rack.
Symptoms of a bad lower rack assembly include:
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
I very seldom respond to requests for feedback like this but definitely feel moved to do so in this case. When our 8 year old dishwasher started acting up my initial reaction was to simply replace it. I wasn't sure what was wrong, nor if I would be able to find the right part once I did figure out the problem. The troubleshooting advice on this website was spot on and I quickly figured out what needed to be replaced. The repair videos were easy to follow and the parts were here two days... Read more
Replace a damaged or wobbly top rack with this upper rack assembly to restore smooth glide and secure loading on the dishwasher's upper level, helping cups and bowls stay in place and wash correctly.
Watched video when I ordered product and it was easy. Buy the way, your product is the most reasonably priced online ! WILL use you again. Saved you in my computer under favorites. Read more
Replace broken, cracked, or missing lower dishrack wheel assemblies. Snaps onto rack to allow smooth gliding in and out of dishwasher. Easy install.
I went to appliancepartspros.com and searched "dishwasher rack rollers" and found mine immediately using only the make of the machine. It took me another 5 minutes to order the parts and check out. I received the parts in two days using the most economical shipping method. It took less than ten minutes to make my dishwasher as good as new! A very simple job made more simple by using appliancepartspro.com. Read more
Replacement silverware basket for dishwashers. Holds flatware during wash cycles. Order if your basket is cracked, broken, has holes, or is missing.
Replaced racks, Read more
Flexible drain hose channels waste water from your dishwasher to the drain system. Replace if cracked, leaking, or damaged to prevent water backup issues.
Color: Black
Note: White / Almond colors are no longer available.
The Dishwasher Door Latch Kit is an OEM part for Frigidaire dishwashers. This kit includes the latch mechanism and necessary components to secure the dishwasher door during operation. The latch ensures that the door stays tightly closed, preventing water leaks and enabling the dishwasher to run its cycles efficiently.
You should replace the door latch kit if it becomes faulty or damaged. Common causes of a bad door latch include regular wear and tear from frequent use, physical damage from forceful closing, or misalignment over time. A compromised door latch can lead to the dishwasher not starting, interruptions during cycles, and potential water leaks.
Symptoms of a bad door latch kit include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
I turned off the power then removed the six or so screws from the back of the top panel. I marked the two front wires on the latch with tape so I would not get them confused. I removed the two screws holding the latch on--these take a six pointed star bit on the screw driver--the bit is in most screw driver sets with interchangeable heads. I then connected the wires to the new latach and put everything back together. The whole process took between ten and fifteen minutes. Read more
Complete dishwasher filter assembly that strains food particles and debris from wash water. Replace when clogged, cracked, or dishes aren't cleaning properly.
Tried cleaning them with bristled brush but just wasn't cutting it. Replaced with new. Hoping for cleaner dishes. Read more
Brass nut that secures the heating element to the dishwasher tub. Replace if cracked, split, or causing leaks around the element mounting area.
Heating element nut had cracked causing a leak. Rather than run right out and buy a new one, I found the cracked nut and replaced it for about 11.00. Thank you Appliance pros. Quick shipping. Read more
Balances and supports the dishwasher door for smooth opening and closing. Replace if broken, worn, or causing the door to drop too quickly or hang loose.
Took cover completely off and tried putting back, could not match up left screw with available screw hole. Tried many different configurations and sequences to make this happen. watched a video on changing the front panel, the door in it had four screws, mine 2, no help there. Searched on the hyperextending issue, found an article about dogs and kids [had both here] climbing on the door and to check the springs and linkages. Linkages intact both sides, R [opposite] side spring very stretched.... Read more
The Drain Pump Assembly is an OEM part for Frigidaire dishwashers. It is responsible for removing water from the dishwasher tub during the drain cycle, ensuring that water is properly expelled to complete the washing process.
Common causes of a bad drain pump assembly include clogs from debris or food particles, electrical issues like a burnt-out motor, or damage due to improper installation or handling.
Symptoms of a bad drain pump assembly include:
Looked up and found the part on Appliance PartsPros.com and fixed the problem for less than $50 and a minimum of trouble. Works great now! Read more
The Door Hinge Kit is an OEM replacement part for Frigidaire dishwashers. Located on the left and right side of the dishwasher doorway, the hinges are responsible for supporting the weight of the dishwasher door and facilitating smooth opening and closing. The kit is composed of two brackets and all of the extra hardware needed to install it on a dryer. Causes of failure include wear and tear of hinge parts over many door openings and closings, damage due to overload or misuse, and deterioration of hinge components exposed to moisture. Symptoms include:
This OEM replacement is also compatible with Electrolux, Kelvinator, and some Kenmore models.
My husband took the door apart replaced hinges in less than 15 minutes. Very easy to do yourself rather then paying a lot of money for someone to come out to do it for you. I would have to say that the customer service was very helpful told me exactly what I needed. Read more