Jgbp26wea1ww - Gas Oven Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 8009
Original Whirlpool light bulb, 40 watt.
Symptoms of needing to replace the light bulb include:
- Dimming or flickering light
- Complete lack of illumination inside the appliance
- Visible signs of damage or burnout on the bulb itself
Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.
Do-It-Yourself Stories from Customers like You
Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016
I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it...
Read more
More
$17.76
- Compare At:
-
$20.96
- You Save:
-
$3.20
Genuine Ge part
By: Ge
Part Number: WB2X9154
The Round Style Oven or Broiler Igniter is an OEM replacement part for GE gas ranges and cooktops. It has a round design and is responsible for reliably igniting the gas burners with each use. Range: 2.5 to 3.0 amps.
Causes of a bad igniter can include wear and tear from repeated heating and cooling cycles, damage or defects in the electrical components, or issues arising from long-term exposure to high heat.
Symptoms of a bad igniter include:
- Difficulty starting or unreliable ignition of gas burners
- Burners failing to ignite with the press of the control knob
- Intermittent ignition problems
- Clicking sounds but no ignition
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
This part fixes the following symptoms
-
Little to no heat when broiling
-
Little to no heat when baking
-
Won't start
-
Gas igniter glows, but will not light
See more...
Do-It-Yourself Stories from Customers like You
Bake oven would not heat up no glow from bottom oven igniter top oven broiler heats Vicente T. • Fort Wayne , IN • February 19, 2016
There are two igniters in oven, one for top broiler and one for bake oven at bottom. Your website help me troubleshoot the problem and locate the part. ordered part was delivered the next day. Following the instructions that others on your website had provided, the repair was quick and SUCCESSFUL.
No need to pull out oven as power cord can be accessed from removing bottom storage drawer.
Step 1: Remove the storage drawer from below the oven and disconnect the power cord from inside. No need...
Read more
More
$95.75
- Compare At:
-
$118.55
- You Save:
-
$22.80
Genuine Ge part
By: Ge
Part Number: WB21X5301
The Oven Sensor Assembly is an OEM part for GE ovens. This part monitors the oven's internal temperature, ensuring it matches the set temperature on the oven's controls. By accurately measuring the heat inside the oven, the sensor assembly communicates with the oven's control system to adjust the temperature accordingly.
Over time, the oven sensor can become faulty due to wear or damage, leading to inaccurate temperature readings. This can manifest as unevenly cooked food, longer cooking times, or an oven that fails to reach the desired temperature setting.
Symptoms of a bad Oven Sensor Assembly include:
- The oven temperature is inconsistent with the setting
- Food is not cooking evenly or as expected
- The oven fails to heat to the set temperature
- Error codes appearing on the oven display related to temperature regulation
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Oven is too hot
-
Won't start
-
Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You
Wasn't commng up to temperture put it at 350 would only get up to 250 Michael U. • Dix Hills , NY • April 21, 2014
Spoke to a parts pro and told them of the problem. there were 2 possibilieies from the explanation of what the parts do. onw could have been the Range oven igniter. that wasn't it beaacause the over was lighting fine. by process of illimination it was the Oven Sensor Assembly.
Read more
More
$123.00
- Compare At:
-
$179.02
- You Save:
-
$56.02
Genuine Ge part
By: Ge
Part Number: WB07K10043
The Oven Door Handle Endcap is an OEM part for GE ovens. This part serves as the finishing touch on either end of the oven door handle, providing not only a clean and polished look but also a secure connection point for the handle itself.
Signs that it's time to replace an oven door handle endcap include visible damage or cracks, the endcap becoming loose or detached, or difficulty in securing the oven door handle properly.
Symptoms of a bad Oven Door Handle Endcap include:
- The oven door handle feels loose or wobbly
- Visible damage to the endcap, such as cracks or breaks
- The endcap does not securely attach to the oven door or handle
- Difficulty in opening or closing the oven door due to a compromised handle
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Ge electric oven door hinge & door handle broke Robert D. • Oceanside , CA • January 03, 2017
REPLACE door hinges and door handle (about 30 minutes)
1. Open the door to the first catch.
2. Lift the latch keepers (stoppers) on the hinge.
3. Lift / pull the door away from the oven.
4. set on a flat surface with inside of door up.
5. Remove three screws on the bottom of the door.
6. Remove two screws on the inside towards of the top of the door (gold in color). These are long wood type screws.
7. carefully lift the inner door from the outer door. (NOTE: there are two metal pieces that the...
Read more
More
$32.95
- Compare At:
-
$43.18
- You Save:
-
$10.23
Genuine Ge part
By: Ge
Part Number: WB48T10095
The Oven Rack is an OEM part for GE ranges, providing a sturdy and reliable platform for baking and roasting a variety of dishes. Its design allows for easy placement and removal from the oven, offering flexibility in cooking heights and accommodating different sizes of bakeware.
Causes of a bad Oven Rack can range from excessive weight being placed on the rack, exposure to high moisture levels leading to rust, or simply the age-related wear and tear that comes from regular use.
Symptoms of a bad Oven Rack include:
- Warping or bending, which can prevent the rack from sitting level in the oven and affect cooking performance.
- Rust or corrosion, which can weaken the rack's structure and potentially contaminate food.
- Difficulty sliding the rack in and out, which may indicate damage or misalignment.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Stove was missing rack Jack S. • Cloverdale , CA • December 30, 2014
Orded rack by stove model number. fit perfect
Read more
More
$64.35
- Compare At:
-
$76.58
- You Save:
-
$12.23
Genuine Ge part
By: Ge
Part Number: WB36X192
The Oven Light Lens is an OEM part for GE ovens, designed to protect and cover the oven light bulb. It allows for a clear view of the oven's interior, making it easier to monitor the cooking progress without opening the oven door, thus maintaining a consistent temperature.
Over time, the oven light lens can become discolored or cloudy from exposure to high temperatures, grease, and food splatters, which can diminish its effectiveness. Additionally, accidental bumps or cleaning can lead to cracks or breaks in the lens.
Symptoms of a bad Oven Light Lens include:
- Diminished light output, making it hard to see inside the oven
- Cracks or damage to the lens itself
- Discoloration or cloudiness that cannot be cleaned off
- The lens becoming loose or falling off
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Oven would not heat and oven light wouldn't work Garett N. • Lubbock , TX • May 06, 2016
Tested the power to the unit by turning on the cooktop portion and saw that I had power to all of the burners. Turned the selector knob to broil and saw that the top element would heat up. I then turned off the breaker to the unit. I then decided to take out the baking element to do a continuity test. When I touched it, a 1.5 inch section fell out. Since that concluded my continuity test, I assumed I needed a baking element. After receiving the parts the NEXT DAY (amazingly great service...
Read more
More
$10.95
- Compare At:
-
$13.14
- You Save:
-
$2.19
Genuine Ge part
By: Ge
Part Number: WB4K1
The Oven Door Gasket is an OEM part for GE ovens. This part is designed to seal the gap between the oven door and the oven body, ensuring that heat is retained during the cooking process.
Causes of a bad Oven Door Gasket can include wear and tear from regular use, resulting in cracks or gaps, heat damage causing the gasket to become brittle or melt in places, and accidental damage such as tears or cuts.
Symptoms of a failing Oven Door Gasket include:
- Visible damage or deterioration of the gasket material.
- The oven takes longer to preheat or has difficulty maintaining the set temperature.
- Increased energy usage as the oven works harder to compensate for heat loss.
- Uneven cooking results due to heat escaping from the oven cavity.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Previous tenant's apparent oven fire. Randolph M. • Chicago , IL • October 19, 2018
The previous tenant in my daughter's new apartment apparently had a grease fire of sorts in the GE XL44 gas oven. This left the insulating double glass panes so fouled up that one could not see into the oven. I removed the oven door (just lifts off the hinges) and proceeded to disassemble the door so as to get to the glass panes. That's when the real problems arose: the window seal rope, which lays around the edge of the opening to the oven, was burnt to a crisp -- see photos. The oven...
Read more
More
$43.26
- Compare At:
-
$51.91
- You Save:
-
$8.65
Genuine Ge part
By: Ge
Part Number: WB16K10026
The Double Burner Kit is an OEM part for GE gas ranges. This kit includes the necessary components to replace the double burner, which is crucial for efficient cooking on GE gas stoves. The double burner provides two separate flame sources, allowing for versatile cooking options with different heat levels.
Causes of a bad double burner can include normal wear and tear, clogs from food debris, exposure to high temperatures, or physical damage. These issues can hinder the burner's performance and safety.
Symptoms of a bad double burner include:
- Uneven or weak flames
- One or both burners not igniting
- Difficulty in adjusting the flame size
- Noticeable gas odor when the burner is off
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dirty burner assemblies and worn and flakig burner grates Yvonne R. • Fernley , NV • March 11, 2015
Purchased new burner assemblies and burner grates from Appliance Parts Pros to replace old, worn out ones. This job was easy as all parts purchased were unpack and place. My range is about 15 years old but is in pristine condition so instead of replacing the range, I chose to replace dirty, worn parts.
Read more
More
$55.95
- Compare At:
-
$68.17
- You Save:
-
$12.22
Genuine Ge part
By: Ge
Part Number: WB1X1293
The Igniter Mounting Screw is an OEM replacement part for GE ovens and ranges. This screw secures the igniter to the burner assembly, ensuring it remains firmly in place for consistent and reliable ignition. Its precise fit and durable design help maintain the stability and functionality of the igniter.
Over time, mounting screws can become corroded, stripped, or lost during repairs or maintenance. A missing or damaged screw may result in a loose igniter, affecting the appliance's ability to ignite properly.
Symptoms of a bad or missing igniter mounting screw include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Failure to hold temperature after preheating. Michael D. • Wilmington , DE • January 07, 2023
I was getting really frustrated with our oven. It would preheat to the correct temperature, then slowly lose heat until it was down to about 200 degrees. So it took about two hours to heat a pizza!
Finally decided to repair the oven myself, rather than pay $300.00 to have a repair person come out. Ordered the replacement igniter from AppliancePartsPros.com, and it arrived in two days.
I followed the instructional video on the AppliancePartsPros.com website, and it was going well until I...
Read more
More
$11.34
- Compare At:
-
$13.49
- You Save:
-
$2.15
Genuine Ge part
By: Ge
Part Number: WB07K10250
The Bottom Door Trim is an OEM part for GE ranges. It serves as a finishing touch, providing a seamless transition between the bottom of the oven door and the base or kick plate area.
Causes of a damaged Bottom Door Trim range from impacts during cleaning or moving the range, to general wear and tear over years of use. Exposure to high heat or spills can also contribute to the deterioration of the trim.
Symptoms of a bad Bottom Door Trim can include:
- Cracked or broken trim pieces
- Missing sections of trim
- Loose or misaligned trim
- Faded or discolored trim material
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models
Do-It-Yourself Stories from Customers like You
Rusted bottom door trim on stove Mel B. • Rossford , OH • April 19, 2014
Initially, I took it off, sanded it and painted with appliance touch-up. Still didn't look good so I ordered a replacement part and installed.
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Genuine Ge part
By: Ge
Part Number: WB15X10048
This White Door Handle is an OEM replacement part for GE ranges. Located on the oven door, this handle provides a means of safely accessing the cooking cavities. As contact points, this durable handle allows withstanding high-heat openings and closings.
Causes can be normal wear and tear over many heating cycles, repeated heavy impacts from storage items, or long-term UV exposure breaking down surface finishes.
Symptoms of a bad door handle may include:
- Breaks, cracks, or splits appearing in the plastic or coating
- Discoloration, fading, or peeling removing their clean look
- Wobble, looseness, or difficulty opening/closing the door due to wear
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken oven door handle Thomas O. • Arlington , TX • February 20, 2019
Found and ordered the handle on appliance parts pros. It was easy to find came in earlier than expected. The handle was easy to install and fit perfectly
Read more
More
$73.36
- Compare At:
-
$86.56
- You Save:
-
$13.20
Genuine Ge part
By: Ge
Part Number: WB02K10158
The Drawer Support is an OEM part for GE ovens. This component provides structural stability and support to the oven drawer, ensuring it slides in and out smoothly and securely holds baking pans and other items stored within.
Causes of a bad drawer support can include regular wear and tear, excessive weight placed on the drawer, or physical damage from impacts or misalignment.
Symptoms of a bad drawer support include:
- Difficulty in opening or closing the oven drawer
- The drawer sagging or appearing misaligned
- Unstable or wobbly drawer when in use
- Noise or friction when sliding the drawer
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The right side slide support for the bottom drawer broke my wife puts some heavy stuff in there and it gave out Anthony W. • Bedford , PA • November 14, 2015
Bought the drawer support, unscrewed the screw with a socket wrench, installed the new drawer support, wala! Took 1 minute. Moral to the story, don't overload that bottom drawer. Metal cookie sheets or the broiler pan is okay, but not big ceramic baking trays, they're too heavy for the nylon drawer supports.
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Ge part
By: Ge
Part Number: WB08T10026
The Receptacle Push-In is an OEM replacement part for GE ranges. This component securely holds the electrical receptacle/plug in place on the back of the range. Proper functioning of the receptacle push-in allows for a stable electrical connection and safe cord positioning.
Causes of a bad receptacle push-in include normal wear over time, bending/stress on the receptacle area, or damage affecting its securing ability.
Symptoms of a bad receptacle push-in are:
- Loose or wobbly electrical plug connection
- Exposed wiring or fragile cord positioning
- Tripped breakers or recurring electrical issues
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Wire connecting from strove to light fixture sparked out Joanne C. • Hudson , FL • October 30, 2015
Called Appliance Parts - service agent was extremely helpful. Tried to find an assembled piece was unable to do so. Send me the individual parts which were very easy to assemble. Was able to replace entire light assembly, reconnect wire with new terminal end. Light works find just now.
Would definitely call again if I needed assistance.
Read more
More
$7.45
- Compare At:
-
$8.36
- You Save:
-
$0.91
Genuine Ge part
By: Ge
Part Number: WB25T10041
This indicator light lens covers the control-panel lamp opening, diffusing the light and protecting the hole from debris and contact. Replace a missing or damaged lens to restore a clean, finished look and clear on/off indication.
- Provides a finished cover for the indicator lamp opening on the panel
- Diffuses the light for clearer visibility
- Shields the opening from dust, moisture, and accidental contact
- Common signs to replace: lens is cracked, missing, discolored, or won't stay seated
What's included: 1 indicator light lens Install notes:
- Disconnect power at the breaker before servicing
- Access the control panel as required for your model (remove knobs/screws if needed)
- Lens typically snaps in; some models use a rear retainer—transfer any clip or seal
- Align with the lamp and press evenly; do not force or overtighten fasteners
Do-It-Yourself Stories from Customers like You
Light went out for child lock on ge cooktop James B. • Fredonia , NY • October 11, 2014
Took top apart to find out that the problem was just the lens for the light was broken. Come to find out that the lens is what holds the light in place. When the lens broke the light fell down into the base of the cooktop. I bought a light and lens but for the price I could not go wrong. I cannot believe how fast and easy my order was handled!! Awesome company
Read more
More
$7.95
- Compare At:
-
$9.38
- You Save:
-
$1.43
Genuine Ge part
By: Ge
Part Number: WB2K68
The Oven Drawer Glide is an OEM replacement part for GE electric and gas ranges. It functions as the suspension mechanism facilitating smooth extension and retraction of range drawer shelves.
Causes of a bad drawer glide can include wear from years of use, damage from heavy pots or pans straining the glide, or loose mounting fixtures failing to securely support shelf weight.
Symptoms of a bad drawer glide include:
- Difficulty accessing or storing items within drawers
- Squeaking or grinding noises when opening/closing
- Drawers failing to fully extend or retract
- Risk of entire drawer assembly detaching over time
This OEM GE part is also compatible with some Hotpoint, RCA and select Kenmore electric and gas range models.
Do-It-Yourself Stories from Customers like You
Broken glider. Dorothy S. • Kalamazoo , MI • January 13, 2023
Replaced glider.
Read more
More
$18.30
- Compare At:
-
$21.96
- You Save:
-
$3.66
Genuine Ge part
By: Ge
Part Number: WB18X26988
This surface burner spark electrode creates the electric arc that lights the gas at the burner. Replacing a worn electrode restores consistent, reliable ignition.
- Generates a high-voltage spark at the burner head to ignite gas
- Helps ensure quick, repeatable lighting when the knob is turned to Lite
- Common symptoms: burner won't light, intermittent or weak spark, delayed ignition, lights only with a match
- If other burners spark normally, the affected burner's electrode is a common culprit
What's included: 1 spark electrode Install notes:
- Disconnect power and shut off gas before servicing
- Handle the ceramic insulator carefully to avoid cracking
- Match the new electrode's tip position and gap to the original; transfer mounting hardware as needed
- Route the ignition wire away from heat/sharp edges, ensure a firm connection, then reassemble and test ignition
Do-It-Yourself Stories from Customers like You
Igniter Rob S. • Maple Valley , WA • October 08, 2017
Replaced
Read more
More
$10.95
- Compare At:
-
$13.03
- You Save:
-
$2.08