Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ice maker cover loose or broken? This bracket secures the front cover to your ice maker assembly. Simple 5-minute DIY repair with basic tools and video guide.
Purchased new ice maker from Appliance Repair and replaced the old ice maker and associated parts that broke during attempted repair on my part. Replaced and is working fine. Read more
This refrigerator roller supports the unit's weight and enables smooth movement for positioning and cleaning. Replace when wheels crack or roll roughly.
Replace front & rear wheels. Read more
Mounting screw for refrigerator door hinge cams and internal brackets. Replace when stripped, missing, or damaged to secure door alignment components.
Ordered the parts, took door off the refrigerator. Removed all parts and replace with new parts. Took me about 15 minutes to complete. Read more
Seals your refrigerator freezer door to prevent air leaks and maintain temperature. Replace if door pops open, feels loose, or shows visible damage.
I replaced the freezer door seal. Read more
Directs defrost water to the drain line in your refrigerator. Replace if cracked, broken, or leaking to prevent water buildup inside the unit.
Ice dispenser won't close or dispenses continuously? This dispenser door pin kit restores proper flapper operation. Easy DIY repair with video guide.
It was not looking good. I could not order the part I needed as it was part of the door - eve though it had screws att Hong it to the freezer door. At one web site it was a replacement of the whole freezer door!/? Luckily I ventured further and found this repair kit and video instructions. My order arrived in 3 days, and the install (thanks to the video) was easy. A whole lot better than buying a new freezer door - not! BTW - Whitlpool should not have made the tabs out of plastic, the metal... Read more
Shelf tilting or slipping? This support stud anchors your refrigerator shelf to the liner wall, preventing drops and keeping shelves level. Easy DIY fix.
Myself Read more
Front cabinet roller wheel for refrigerators. Mounts under the cabinet to allow smooth rolling and positioning. Replace if cracked, broken, or worn out.
Followed the instructions that was sent with wheel . wasn't to difficult. maybe 15 to 20 minutes total repair time,start to finish. Read more
Replace your refrigerator freezer door gasket to restore proper seal and prevent warm air leaks. Fits select side-by-side models. Verify compatibility.
Bought gasket from website, followed easy helpful video instructions, perfect fit. Read more
Replaces cracked, broken, or discolored water dispenser lever on side-by-side refrigerators. Installs behind dispenser faceplate. White finish.
I replaced the Ice Dispenser Lever. Since the replacement part is only available in white and my fridge is bone, I replaced also the Water Dispenser Lever, so it looks much better. I followed the instructions in the video, which were very useful and very well done. My problem was that the refrigerator is a KitchenAid built-in, while the instructions were for a Whirlpool, so the removal of the faceplate was quite different from what was shown in the video and more difficult. Also there were some... Read more
Fix frost buildup and warm fridge issues with this adaptive defrost control board. Solves freezer icing and defrost cycle failures. Moderate DIY repair.
The 20 year old unit still serves us well, looks good and has been kept in good repair. The condenser fan had stopped so I removed, cleaned and oiled that motor. The decision was made to make an upgrade to the evaporator motor and control units so that the appliance could reasonably be expected to have extended service life. The Ice maker module had been replaced 7 years ago. I ordered the parts and have made the upgrade for temperature controller and the defrost control. If you are in a... Read more
Cabinet roller axle supports refrigerator wheels for smooth movement. Replace if rollers wobble or fridge is hard to move. Verify fit with your model.
Watched the video on how to replace. Ordered new roller, which was delivered in just a couple of days. Since the roller had broke, I was unable to roll out the refrigerator, so I tilted the refrigerator back and placed a small furniture slider under the roller frame to prevent gouging the wood floor. Then it was easy to slide out the refrigerator and replaced the roller as explained on the video. I had ordered a pin and bolt, just in case I would need to replace, but didn't need them. ... Read more
Replace a cracked, broken, or leaking 1/4" water tube in your refrigerator. This cut-to-fit tubing connects internal water components. Easy DIY fix.
Replaced filter housing, and both water tubes Read more
Ice dispenser door stopped working? This coupling connects the drive motor to the dispenser door mechanism. Replace a broken coupling to restore ice dispensing.
My LG electric dryer stopped drying the other day and I searched on line for suggestions on what may have caused it to stop working. I came across AppliancePartsPros.com and quickly found some of the most common issues with my LG dryer. The problems were listed in the order of most common occurrence, and had extremely helpful and detailed instructions on how to not only diagnose the problem, they also showed exactly how to access and repair the issue. Unfortunately, it was late on a Thursday... Read more
Grey decorative cap that covers the water filter housing on side-by-side refrigerators. Replace if cracked, broken, or missing for a finished look.
I replaced the pads on my Kitchenaid side-by-side. I was able to order ones that looked exactly like the old ones. It was even easier than what I had seen in a YouTube video. Read more
Directs defrost water from the evaporator to the drain pan. Replaces cracked, broken, or deformed drain tubes causing leaks or ice buildup issues.
A YouTube video: https://www.youtube.com/watch?v=jIdtNdDXFDk , by a professional appliance repair company described replacement of the freezer drain pipe with Kenmore's (by Whirlpool) revised drain pipe. Ice buildup inside the freezer was caused by warm air beneath the freezer contacting cold air from inside the freezer the resulting condensation freezing and blocking the drain, causing the ice buildup inside. The revised drain tube functions as a p-trap to prevent cold/warm air interaction.... Read more