Frigidaire Fghd2433kf1 Parts

The Main Control Board is an OEM part for Frigidaire dishwashers. It serves as the central hub that manages and directs all the dishwasher's functions, including cycle selection, timing, and operation of various components like the pump and motor.

Causes of a bad control board can include electrical surges, moisture exposure, or general wear and tear. These factors can lead to failures in the electronic components or connections within the board.

Symptoms of a bad Main Control Board include:

• The dishwasher not starting or completing cycles
• Error codes displayed on the control panel
• Inconsistent or malfunctioning cycle operations
• The dishwasher becoming unresponsive to control inputs

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door Spring is an OEM part for Frigidaire dishwashers. It plays a critical role in the smooth operation of the dishwasher door, providing the necessary tension to ensure that the door opens and closes gently and securely. Without a functioning door spring, the door may drop open suddenly or be difficult to close, which can lead to potential hazards and inefficiencies in the kitchen.

Causes of a bad Door Spring can include stretching or snapping due to metal fatigue, corrosion from exposure to moisture and detergents, or improper alignment that leads to uneven wear and tear.

Symptoms of a failing Door Spring include:

• The dishwasher door feeling unusually heavy or dropping open
• A snapping sound when opening or closing the door
• Difficulty in keeping the door closed or fully open
• The door slamming shut rather than closing gently

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This base is the lower cabinet support that helps keep the appliance stable and holds internal components in their correct position. Replacing a damaged base restores proper fit, alignment and reduces cabinet movement. What it does:

• Provides structural support for the appliance cabinet and mounting points
• Keeps internal components aligned and maintains correct clearance
• Helps prevent rocking, vibration and gaps at the bottom of the cabinet
• Protects lower components from contact with floor-level debris or uneven surfaces

• Disconnect power and, if applicable, water before beginning work
• Access may require removing the toe kick or lower access panels
• Keep track of mounting screws and brackets; use replacement hardware if original fasteners are corroded

The Rail End Cap is an OEM part for Frigidaire dishwashers. This small but essential component is designed to fit at the end of the dishwasher rack rails, preventing the racks from sliding off the rails when pulled out for loading or unloading. The end caps also help to protect the dishwasher’s interior walls from scratches or damage that might occur if the metal racks were to come into direct contact with them. 

Symptoms of a failing rail end cap include:

• Dishwasher racks sliding off the rails
• Difficulty pulling racks in and out smoothly
• Noticeable damage or scratches inside the dishwasher

Causes of rail end cap damage typically involve physical stress from frequent use, accidental breakage during loading, or degradation of the material over time.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Upper Rack Assembly is an OEM part for Frigidaire dishwashers. It is designed to hold dishes, glasses, and other items in the upper section of the dishwasher, allowing for efficient and organized cleaning.

Causes of a bad Upper Rack Assembly can include wear and tear over time, damage from heavy or improperly placed items, or issues with the rollers and tracks that allow the rack to slide in and out smoothly.

Symptoms of a bad Upper Rack Assembly include:

• Difficulty sliding the rack in or out
• The rack falling off its tracks
• Rust or corrosion on the rack
• Broken or missing tines that hold dishes in place

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Upper Dishrack Wheel is an OEM part for Frigidaire dishwashers. This part attaches to the upper dishrack, allowing it to slide in and out smoothly along the dishwasher's tracks for easy loading and unloading of dishes.

Common causes of a bad dishrack wheel include wear and tear from frequent use, damage from heavy loads or improper handling, and breakage due to impact.

Symptoms of a bad Upper Dishrack Wheel include:

• Difficulty sliding the upper dishrack in and out
• The upper dishrack derailing or not staying on its tracks
• Unusual noises when moving the dishrack
• Visible damage or wear on the wheel

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This MultiFence is a multi-position rack fence that mounts to the rack to support and organize dishes, lids, and bakeware. It helps keep items upright and in place so cycles run smoothly and cleaning performance stays consistent. What it does:

• Attaches to the rack and flips/locks to secure items of different sizes
• Helps prevent plates, lids, and trays from tipping or sliding during operation
• Replaces a fence that is cracked, warped, missing, or won't stay in position
• Common symptoms include dishes falling over, rattling during cycles, or poor results from shifted loads

• One MultiFence rack fence

• Disconnect power to the appliance; turn off water supply if servicing a dishwasher
• Pull the rack out; release the retaining tabs or clips to remove the old fence
• Align and snap the new fence onto the rack wires; ensure it pivots and locks properly
• Reinstall the rack and verify smooth operation

The Heating Element Nut is an OEM part for Frigidaire dishwashers. It plays a crucial role in securing the heating element in place, ensuring it functions effectively to heat water during the wash cycle. This component ensures the stability and proper operation of the dishwasher's heating element, contributing to the machine's overall efficiency and performance.

Causes of a bad part can include physical damage during maintenance or installation, corrosion over time due to exposure to water and detergents, or general wear and tear that affects its ability to securely hold the heating element in place.

Symptoms of a bad Heating Element Nut include:

• Loose heating element, leading to inefficient heating or water not heating at all
• Water leakage from the heating element area, potentially caused by a poor seal
• Unusual noises during the dishwasher cycle

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Vent Blower Assembly is an OEM part for Frigidaire dishwashers. It is designed to help ventilate the dishwasher by expelling hot, moist air from the interior after the washing cycle. 

You should replace the vent blower assembly if it becomes faulty. Causes of a bad vent blower assembly can include regular wear and tear, blockages from debris, or electrical issues. A malfunctioning vent blower can lead to poor drying performance and excessive moisture inside the dishwasher.

Symptoms of a bad vent blower assembly include:

• Dishes not drying properly after the wash cycle
• Excessive moisture or condensation inside the dishwasher
• Unusual noises coming from the vent blower area
• The dishwasher emitting warm, moist air less effectively

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Upper Rack Assembly is an OEM part for Frigidaire dishwashers. This rack provides a secure place for dishes, glasses, and other small items to be cleaned during the wash cycle. 

Causes of a bad upper rack assembly can include regular wear and tear, rust or corrosion from prolonged exposure to water, and damage from heavy or improperly placed items.  

Symptoms of a bad upper rack assembly include:

• Difficulty sliding the rack in and out
• Broken or missing tines
• Visible rust or corrosion
• Dishes not staying securely in place

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Tine Row is an OEM part for Frigidaire dishwashers. It is designed for the left side tine row of your Frigidaire dishwasher. It is designed to hold and support dishes, glasses, and other items securely in the dishwasher rack. The tine row ensures that dishes are properly spaced and positioned for optimal cleaning and drying during the wash cycle.

Over time, tine rows can become damaged or worn out due to repeated use, heavy loads, or mishandling. Bending or breaking of the tines can occur, affecting the overall performance of the dishwasher and potentially causing damage to dishes.

Symptoms of a bad Tine Row include:

• Bent or broken tines
• Difficulty in securely holding dishes
• Rust or corrosion on the tines
• Dishes not being cleaned properly due to improper spacing

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This flapper valve is the dishwasher's one-way drain check. It directs wastewater out and helps prevent backflow into the tub, promoting complete draining and reducing standing water, odors, and water returning after the drain cycle.

• Maintains one-way water flow from the sump/pump to the drain hose
• Helps prevent backflow from the sink or air gap into the dishwasher tub
• Wear, warping, or sticking can lead to slow draining or water left in the tub
• May also present as water backing into the tub after a cycle or intermittent drain faults

• Disconnect power and turn off water supply before servicing
• Access the valve at the drain outlet/pump area; note hose and clamp orientation
• Match the original valve orientation; the flapper should open toward the drain hose (direction of flow)
• After reassembly, run a short fill-and-drain test and inspect for leaks and proper draining

The Door Hinge Kit is an OEM replacement part for Frigidaire dishwashers. Located on the left and right side of the dishwasher doorway, the hinges are responsible for supporting the weight of the dishwasher door and facilitating smooth opening and closing. The kit is composed of two brackets and all of the extra hardware needed to install it on a dryer.

Causes of failure include wear and tear of hinge parts over many door openings and closings, damage due to overload or misuse, and deterioration of hinge components exposed to moisture.

Symptoms include:

• Loose or sagging dishwasher door
• Difficulty opening or closing the door
• The door does not stay securely closed during cycles
• Noises or squeaks emanating from hinge areas

This OEM replacement is also compatible with Electrolux, Kelvinator, and some Kenmore models.

The Delivery Tube is an OEM replacement part for Frigidaire dishwashers. This tube is designed to supply water to the upper spray arm from the pump assembly. By doing so, it plays a role in ensuring that the upper rack of dishes receives adequate water coverage for effective cleaning. 

Causes for a malfunctioning Delivery Tube can include blockages from food particles or mineral deposits, general wear and tear from regular use, or damage incurred during maintenance or installation.

Symptoms of a bad Delivery Tube include:

• Inadequate cleaning of dishes on the upper rack
• Water not reaching the upper spray arm
• Unusual sounds during the wash cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Bracket is an OEM replacement part for Frigidaire dishwashers. This component provides structural support for securing parts within the dishwasher, ensuring proper alignment and stable operation during cycles. Its precise fit is essential for the smooth functioning of your appliance.

Over time, the bracket may wear out or become damaged due to repeated use, corrosion, or accidental impact. A malfunctioning bracket can lead to misaligned components or instability during operation, potentially affecting the dishwasher's performance.

Symptoms of a bad bracket include:

• Loose or misaligned parts within the dishwasher
• Excessive noise or vibrations during operation
• Difficulty in properly installing or adjusting components
• Visible cracks or corrosion on the bracket

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Water Level Float Switch Assembly is an OEM replacement part for Frigidaire dishwashers. It uses a floating switch design to accurately sense water levels filling and draining during cycles. Proper level detection allows for optimized wash and rinse action and water volume control.

Causes of a bad float switch assembly can include wear and tear over many years of use, interfering with free float movement. Mineral or scale deposits may accumulate on float components, inhibiting functionality. Physical damage from impact could introduce leaks.

Symptoms of a bad float switch assembly include issues such as:

• Inability to properly detect water levels
• Long fill or drain times
• Failure to fill or drain completely
• Potential overflow or standing water issues
• Error codes pointing to level sensor faults

This OEM Frigidaire replacement part is also compatible with some Electrolux, Westinghouse, and Kenmore dishwashers.