Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix inconsistent temps or ice buildup on evaporator coils? This sensor seal protects accuracy. DIY-friendly with wire splicing. Video guide available.
This fridge has had a problem of ice building up around evaporator coil in fresh food side. Wife (she HATES this thing) says it's done this from day one; 10 years. GE guy says all these models do this and there's no fix for it, so we have clean out the ice periodically... Like the 1940s pre auto defrost. Now with the issue of FF side temp too highi assumed the ice had built up around FF evaporator coil preventing proper cooling, but AppliancePartsPros.com suggested the FF temp thermistor may... Read more
Replacement humidity control slide for refrigerator crisper drawers. Installs in produce compartment to adjust moisture levels. Needed when original is broken, cracked, or missing.
Just replaced the part (snap it in...abc....123...no problem) Read more
Directs defrost water from the evaporator to the drain pan below your refrigerator. Replace if cracked, damaged, or clogged to prevent water pooling.
Pulled down the existing drain tube and installed new one. Tight area so it requires two hands to push up and attach the new tube. The short rubber tubing attached to the new drain tube has to fit snug onto the plastic tube connection that hangs down. Replacing the water dispenser tray is simple and no explanation needed, Read more
Supports the upper fresh food door on side-by-side refrigerators. Replace if the original cam riser is worn, cracked, or broken to restore smooth door operation.
Replaced the two parts ordered. Read more
Lower cam riser for refrigerator door hinge. Lifts door for smooth opening and closing. Replace if cracked, worn, or missing to restore proper fit.
We bought a used fridge and forgot to get the hardware to mount the doors. Looked up the model on your website. Using the pictures I was able to order just the parts I needed and not to duplicate anything (or leave anything out!). The parts arrived and because I watched the "how to" video I knew to use the "trick" to hold the doors up while attaching the hardware. Had the doors mounted in less than 15 minutes!.. Thanks Read more
Replacement door bin for side-by-side refrigerators. Installs on the inner door to store condiments, bottles, and jars. Replace if cracked or broken.
The door shelf we ordered fit right and looked just like the OE units in it. Read more
Fix a refrigerator that clicks but won't cool by replacing the compressor start device. This relay and overload assembly helps start the compressor reliably.
Replaced TSD combo. Read more
The Grill Recess is an OEM replacement part for GE refrigerators. It is located in the dispenser area, acting as a catch tray to collect drips and spills from the water or ice dispenser. This component helps keep the dispenser area clean and prevents water from dripping onto the floor or refrigerator surfaces.
Over time, the grill recess can become cracked, discolored, or damaged due to regular use and exposure to moisture. Replacing it ensures a clean appearance and continued functionality of the dispenser area.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Followed the instructions in your video. The demonstration is well done and easy to follow. Read more
Seals your refrigerator's fresh food door to prevent air leaks and maintain proper temperature. Replace if torn, cracked, or door won't stay closed. Verify fit.
Ordered replacement seals for both freezer and refrigerator sides. Followed directions that I had found on YouTube. The installation in a nut shell is warm the seals in a bathtub with very hot water for at least 2-3hrs then place the seals. Then warm the seals with a hair dryer as needed. After getting the seals out of the hot bath the installation took all of 20-25 minutes for both seals. Read more
Humidity control slider for refrigerator crisper drawers. Replaces broken, cracked, or missing adjusters. Installs on drawer to regulate airflow and moisture.
Ordered new parts Read more
Water line fitting that connects the ice maker supply tube. Replace if cracked, leaking, or damaged to restore a secure seal and prevent water leaks.
With new hose Read more
Replacement chiller shelf for your refrigerator door. Stores snacks, beverages, and condiments at cooler temps. Replace if cracked, broken, or missing.
My refrigerator is 13 years old and has always been a pain. The shelf above the ice maker broke last year which caused the ice maker to keep making ice even when the bin was full (the shelf keeps the ice contained which causes the ice buildup to shut off the ice maker). My water dispenser would occasionally refuse to dispense water. It appeared to me that the issue was caused by the nozzle freezing. The trap door for the ice was not closing properly so freezing air was always blowing out. ... Read more
Refrigerator light not working? This light bulb socket holds the bulb securely and provides electrical connection. Easy DIY repair with video guide.
Had some confusion of what part I needed, needed the one with the motor and thermostat. Fortunately, I've been fixing wiring for many years, I simply cut the new motor out of the harness, and used that nice glue-inside-heat-shrink tubing to seal the soldered 'Western Union' style splices. New light socket and lamps fit fine, worked fine, new motor is fine, problem resolved. FYI: Look closely at the wiring in you unit, there are two wire harnesses, one feeds the light, the other feeds the motor... Read more
Replacement spring for refrigerator ice dispenser systems. Wraps around shifter lever to control crushed vs. whole ice selection. Replace if broken or stretched.
When I took it apart I found that the drive cup was cracked, the helix lock plate hole was reamed out and the ice deflector spring was broken. The biggest problem was the helix had slipped down the shaft and allowed the end of the shaft to bore a hole in the housing which made it a bear to get out. Others have had the same problem. Once I got past that obstacle, it was simple to replace all the parts and it's working like normal again. Very helpful video explaining the repair. Read more
Protective cap that covers the evaporator fan motor bearing and housing in freezers and refrigerators. Replace if cracked, broken, or missing to prevent debris.
Replacement of the evaporator fan motor, fan blade, and grommets. The amount of disassembly to reach the part took most of the effort Read more
Black plastic lever assembly that installs on the freezer door hinge mechanism. Replace when cracked, broken, or missing to restore proper door closure.
I replaced the lever asm. and spring Read more