Jnm 15415 Sm5 Ss Parts

The Hood Damper Assembly is an OEM part for GE microwave ovens. This part controls the flow of exhaust air to minimize odors and smoke from cooking. This damper opens to allow air to vent outside during microwave operation and closes to prevent outside air from entering when the microwave is not in use.

Causes of a bad hood damper assembly can include mechanical failure such as a stuck or broken damper, deterioration of the linkage or springs that operate the damper, and blockage caused by grease or debris accumulation, which can impair its functionality.

Symptoms of a bad Hood Damper Assembly include:

• Ineffective venting of smoke or cooking odors
• External air leakage into the microwave system
• Unusual noises during operation indicating a damper misalignment or obstruction

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This upper vent grille assembly replaces the front top grille on your microwave. It directs airflow through the louvers and restores a secure, finished look while helping shield the filter area and internal components from accidental contact.

• Channels exhaust or recirculating air through the top-front opening
• Shields the filter compartment and cabinet edge from debris and touch
• Provides a finished appearance; helps minimize vibration when properly secured
• Replace if cracked, warped, mounting tabs are broken, or the grille won't stay in place

• Disconnect power before servicing; support the microwave if needed
• Remove the top screws, slide the grille to release the tabs, then lift off; install the new grille in reverse order
• Do not overtighten screws into plastic
• The grille is fully seated and clear of the door swing

The Magnetron is an OEM part for GE microwaves. The magnetron converts electrical energy into microwave radiation, which heats and cooks the food placed inside the microwave oven.

Over time, the magnetron can wear out or fail due to regular use, electrical surges, or overheating. A malfunctioning magnetron can lead to the microwave not heating properly, reducing its overall functionality and efficiency.

Symptoms of a bad magnetron include:

• The microwave not heating food at all
• Unusual noises such as buzzing or humming during operation
• A burning smell or visible damage inside the microwave
• The microwave turning on but failing to heat

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This thermostat switch is a temperature-sensitive safety device used in select appliances to open or close an electrical circuit at a set temperature. Replacing a failed switch helps restore proper temperature control and protects components from overheating.

• Monitors temperature and changes state (open/closed) at its calibration point
• Helps prevent overheating or incorrect temperature regulation
• Common failure signs: no heat/overheating, intermittent cycling, or unit shutting off prematurely
• May be mounted to a bracket or surface near the heated area, depending on the model

• Disconnect power before servicing; verify no voltage is present
• Note wire positions and orientation of the original switch before removal
• Transfer any mounting hardware from the old part if not reusable
• After installation, test operation and observe initial heating cycle for proper function

This turntable motor drives the coupler and glass tray in your microwave, rotating food for more even heating. Replace a failed or noisy motor to restore smooth, consistent tray movement and reduce cold spots during cooking and reheating.

• Drives the center coupler and glass tray to rotate during operation
• Helps ensure even heating by moving food through the microwave energy field
• Direct replacement when the original motor is seized, noisy, or electrically open
• Symptoms include a tray that won't turn, jerky rotation, or a humming/grinding sound from the turntable area

• Disconnect power before servicing; microwaves contain high-voltage components that can retain a dangerous charge
• Access to the motor is typically from the bottom; remove the cover/panel per your model's service information
• Transfer the two wires to the new motor and secure it with the mounting screws; ensure the shaft fully engages the coupler
• After reassembly, test with a cup of water to ensure smooth rotation

This is the clear glass lens that covers the cooktop light on select GE over-the-range units. It shields the bulb from grease and splatters while allowing bright, even illumination of the cooking surface below.

• Protects the cooktop light bulb from grease, moisture, and debris
• Restores proper lighting if the original lens is missing, cracked, or stained
• Helps maintain safe, even illumination of the range area
• Common symptoms: broken or missing lens, dim or uneven light due to a damaged cover

• Disconnect power to the appliance before servicing
• Allow bulbs and surrounding area to cool completely
• Handle glass carefully to avoid chipping; wear cut-resistant gloves
• Ensure the lens seats fully and any retaining tabs/screws are secured per the product's service instructions

Color: brown. It measures about 8-1/2 inches in diameter.

This is the high-voltage magnetron for a microwave oven. It generates the microwave energy that heats food; replacing a weak or failed magnetron can restore normal cooking performance and resolve "runs but no heat" complaints.

• Generates the RF energy that cooks and heats inside the microwave cavity
• Common fix when the microwave runs but does not heat
• Symptoms can include unusually loud humming/buzzing during operation
• Helps with intermittent heating or a burnt odor from a failing tube

• Disconnect power and safely discharge the high-voltage capacitor before servicing
• Note wire locations; transfer any shielding, brackets, or insulators from the original as required
• Mount securely and ensure correct orientation for proper cooling airflow
• After reassembly, test heating with a cup of water

This thermal cut-off installs in the bottom location and protects the appliance by interrupting power when excessive heat is detected. It helps prevent overheating-related damage to internal components.

• Monitors temperature at the bottom of the unit and opens the circuit if an over-temperature condition occurs
• Common symptoms include no power, shutting off during use, or not starting after an overheating event
• The TCO tests open (no continuity), it must be replaced

• Disconnect power before servicing; microwaves contain a high-voltage capacitor that must be safely discharged
• Note wire positions and mounting orientation; transfer any reusable bracket/insulator and make secure, insulated connections
• After reassembly, ensure airflow and vents are unobstructed to prevent repeat overheating

This replacement thermostat monitors internal temperature and opens the circuit if overheating is detected. Restores the appliance's over-temperature protection and can resolve shutoff, no-power, or no-heat issues related to a failed safety thermostat. What it does:

• Monitors temperature and opens the circuit at a set threshold to prevent overheating
• Helps protect internal components from heat damage
• Failure symptoms include: no power, shuts off during/after cooking, runs but doesn't heat, or won't restart until cooled
• May cause intermittent operation following extended or high-heat use when failing

• 1 thermostat

• Disconnect power before servicing; microwave repairs involve dangerous high voltage
• Access the thermostat, note wire positions, and transfer leads to the new part
• Mount flush and secure with the original screws/bracket to ensure proper heat sensing
• Restore power and test; monitor operation to confirm normal cycling and protection

The Turntable Coupler is an OEM part for GE microwaves. This component connects the turntable motor to the microwave's glass tray, enabling the rotation of the tray during cooking. By ensuring even heating and cooking of food, the turntable coupler plays a vital role in the microwave's overall performance.

Causes of a bad turntable coupler can include wear and tear from frequent use, physical damage from heavy or uneven loads on the turntable, or breakage from accidental impacts.

Symptoms of a bad Turntable Coupler include:

• The turntable not rotating
• Uneven cooking or heating of food
• Grinding or clicking noises when the turntable attempts to move
• The glass tray being unstable or slipping off the coupler

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This charcoal filter captures odors and fine particles from the air as it recirculates through the microwave, helping keep your kitchen fresher and reducing buildup inside the unit.

• Adsorbs cooking odors when the microwave is set up for recirculating operation
• Helps maintain airflow by trapping grease and fine particulates
• Replace when saturated or damaged; common signs include lingering odors, reduced capture of smoke/steam, or a visibly dirty filter
• Regular replacement supports effective ventilation and protects internal components

• Disconnect power before servicing
• Access panel/grease filter removal may be required to reach the charcoal filter
• Note airflow orientation and seat the new filter securely
• Do not wash; replace at recommended intervals for best performance

This hardware assembly secures designated components in your appliance, restoring a tight, rattle-free fit after service or wear. Replacing damaged or missing fasteners helps keep panels and parts aligned and operating as designed.

• Provides the correct fasteners/spacers for the specified location on the unit
• Replaces stripped, lost, or corroded hardware
• Helps eliminate looseness, vibration, or rattling noises
• Supports proper alignment and fit of the associated part or panel

• Disconnect power before servicing; allow hot surfaces to cool
• Support the part being fastened to prevent damage or misalignment
• Match each fastener one-for-one; note orientation and any washers/spacers
• Hand-start threads and do not overtighten; verify clearances and operation after install

This flat bolt is a factory fastener used to secure appliance components. Replace a missing, stripped, or corroded bolt to restore a tight, secure assembly and help prevent loosening, rattling, or misalignment during normal operation.

• Fastens panels, brackets, and other components as designed by the manufacturer
• Restores a secure fit when the original hardware is missing or damaged
• Helps reduce looseness and vibration-related noises
• Built to original specifications for proper fit and function

• Disconnect power and allow the unit to cool before servicing
• Support the part being fastened; align holes before inserting the bolt
• Start threads by hand to avoid cross-threading; tighten securely without overtightening
• Reuse any original washers or spacers if present

Guide roller (TT) supports the appliance drum and keeps it aligned for smooth rotation. Replacing a worn guide roller reduces noise, prevents rubbing, and helps restore proper drum tracking. What it does:

• Supports and guides the drum/tub so it spins smoothly and stays centered.
• Reduces metal-on-metal rubbing and squeaking caused by worn rollers or bearings.
• Helps prevent uneven wear on the drum, belt, and seals.
• Improves drum tracking and overall operation when worn or damaged.

• Disconnect electrical power (and turn off gas supply on gas models) before starting any repair.
• Access may require removing the dryer cabinet or drum.
• Inspect other rollers, shafts, bearings, and the drive belt; replace as needed to avoid repeat failures.
• Use appropriate hand tools and support the drum during removal to avoid damage or injury.