Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix a slamming or heavy microwave door with this right-hand torsion spring. Moderately challenging repair takes 1-2 hours with basic tools and care.
Turned power off. Unscrewed the two vertical trim pieces and the bottom trim piece(stainless). Slid microwave out a few inches. Unscrewed the two screws on the inside of the door toward the top that are recessed in the black plastic. (Besure to hold the door assembly together while doing this so you don't accidently drop the glass door). This exposed the bottom two springs. Usually one has a paint mark on the end to tell them apart. Replaced and put back together. Read more
Illuminates oven cavity for monitoring food while cooking. Replace when bulb burns out or oven interior is dim. Verify fit with your model number.
One would think replacement appliance light bulbs would be a staple In Service departments of appliance stores, not so. I decided to travel to several local parts and service departments to pick up six of the little bulbs. Guess what? no one had them in stock! Time, energy spent - mission NOT accomplished. Once again, I turned to AppliancePartsPro.com. Et voila! They bulbs were in stock AND arrived the next day! YEA! Fast, simple service. Instant Success! Who could ask for anything more? Read more
Maintains tension to securely close your microwave door and create a proper seal. Replace when door sags, won't close firmly, or spring breaks from wear.
I had a handyman do it. He had never done one before but it took him less than an hour. Read more
Replaces the inner heat-resistant glass panel in your oven door. Needed when glass is cracked, shattered, or broken during cleaning or use.
Replaced it myself. Read more
Heating element not working? This mounting screw securely fastens the heating element in place. A simple DIY repair that takes about 20 minutes to complete.
We ordered the part and one extra screw(which we didn't end up using). If possible take door off your oven for easy access and have lighting source to see well. Taking part out was easy. Putting back in was more difficult because you have to match up two layers of parts in our oven. The broiler coil and the broiler shield above it. We used small craft clothes pins to keep wires from going behind the built in oven. We used a small diameter screw driver to match up holes before putting... Read more
Replacement door frame for microwaves. Surrounds and supports the door assembly. Needed when original frame is cracked, warped, or broken.
Ordered part for overnight delivery. Part arrived on time and was perfect fit. Easy fix. Read more
Microwave turntable won't rotate or makes rattling noise? This motor drives the glass tray for even heating. Easy 10-minute DIY fix with basic tools.
Obtained the replacement motor and tray coupler from Appliance Parts Pro. Video of the typical replacement was very helpful to show what to expect and how to replace the motor and coupler. The removal of the bottom plate was held in place by several phillips screws. The motor was attached with two torx screws. The electric connection clips to the motor required needle nose pliers to pull them off. The tray coupler was simple to install after the motor was secured and bottom plate was replaced.. Read more
Microwave not heating but runs? The magnetron generates microwave energy for cooking. Intermediate repair requiring discharge of capacitor first.
Replacing a magnetron in my particular 9-year-old microwave (a microwave/hood combination) was not a simple “plug & play” operation. That is why I am placing this in the slightly difficult area. First, it takes 2 people to remove the microwave from the top of the stove. Next the main outer panel need to be removed. After that, 2 sheet metal panels need to be removed in order to expose the high voltage components for testing. Always discharge the high voltage capacitor first before doing... Read more
Fix F5-E1 errors or doors that won't stay closed with a new door latch assembly. Solves latch cycling issues and false door-open warnings.
Replaced the latch. Everything works fine now Read more
Secures the oven door gasket for a tight seal, preventing heat loss. Replace if gasket is loose or heat escapes. Confirm fit with your model number.
Replacing the Door Gasket is very easy and will take about 2-3 mins per door. Simply remove the Gasket Retainer (1 screw), and pull off the old Gasket. Install the new gasket by simply pushing the gasket clips into the holes where the old clips came out from. Be sure to start gasket at the first hole either side of the Gasket Retainer and work your way around. Reinstall Gasket retainer. The Door Insulation is a very involved repair, and best to follow specific repair manual instructions. Door... Read more
Replacement outer door glass panel for microwave ovens. Restores clear viewing window when original glass is cracked, shattered, or stained. Includes full door assembly.
The handle from the previous door must be removed and attached to the new door. If you only want to do this once, make sure when reattaching the old handle/bracket that it is aligned left-to-right and is parallel to the edge of the new door. The holes in the new door are large enough that the door will be skewed if not well aligned. Pay particular attention to the bottom corners once installed as they MUST clear the sides of opening or you may be purchasing yet another door/glass. No torque... Read more
Probe indicator stays on or won't light when plugged in? This meat probe monitors internal food temperature. Easy DIY fix with video guide included.
Purchased the parts on-line. The website is very easy to use and found it easy to identify the parts needed. Read more
Door hinge for electric wall ovens. Mounts to the oven frame to support the door. Replace if hinge is broken, cracked, or door is hard to open and close.
Replaced both hinges. Easiest repair I’ve done on this unit. Took less than 20 minutes from start to finish. Read more
Replacement hinge for wall oven doors. Installs on left or right side to support door operation. Needed when hinge is broken, cracked, or worn.
Removed oven door. Removed front panel from oven door. Replaced both door hinges. Read more
Microwave not heating or making loud humming noise? The diode converts AC to DC power for the magnetron. Moderate difficulty repair, 1-2 hours.
Replaced Magnetron and diode. Fixed problem and microwave workso again. Very time consuming because of microwave/oven built-in combo. Not easy to get to parts that needed to be replaced. Still cheaper to repair than to replace. Read more
Oven won't heat or bake properly? This bake element kit restores even heating for baking and roasting. Located at oven bottom. DIY repair under 1 hour.
Following the instructions that I received through the helpful research of the APP staff, I disconnected the power, disassembled the back of the oven, and accessed the hidden element. This involved bending parts of the sheet metal and cutting the insulation, so I was very apprehensive about doing this. Once I exposed the compartment that contains the element, I had difficulty extracting the old part and was really nervous about pulling hard to extract it - until I saw the damaged element. It... Read more