Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Secures the shock absorber to the outer tub in your washer. Replace if the pin is broken, cracked, or missing to restore proper shock mounting.
With more difficulty and frustration than expected but it works fine now. Things learned: 1. Order only 3 replacement pins. One comes with the shocks that you can't be sure you see in the picture. 2. A circuit board in a plastic box mounted to the floor, left rear, must be removed by two screws to be able to get pliers onto the head of the pin more easily. This helps installation too. 3. A 1/2" deep socket pushed onto the retaining tab of the pin stays there while you pull with pliers from the... Read more
Secures the inner bellow seal to the tub in front-load washers. Replace if rusted, broken, or causing seal leakage. Tight installation requires patience.
Watched the video a few times for door boot seal replacement. It was a lot of help! The spring is the hardest to replace and I did enlist the help of my wife. Everything went back on great. If you have to replace the front panel (with the buttons) be mindful that the buttons are spring loaded and will come out. I did not lose any and it went back together just fine. A little touch up paint on the washer and it all looks brand new and works great. And the parts came in quicker than... Read more
Replacement outer door panel for washer front-load doors. Installs around door glass. Replace if cracked at hinge, broken from impact, or warped plastic.
My teenaged son took the old washer door off and apart. He replaced our glass from our washer onto the new doors and attached it to the hinge. These doors are compatible with Kenmore washer even though it says Frigidaire. Read more
Stabilizes the washer tub during spin cycles. Replace worn or broken rear shock absorbers to restore smooth operation and prevent drum contact with cabinet.
Replaced pump. All components are accessible from the front of the machine. You have to remove two screws in the back that hold on the top cover, then slide the cover back. This will allow access to the screws that hold on the control panel. Remove the control panel (unplug cable), then remove the spring/wire that holds on the door bellows to the front panel (removing and installing that is the most difficult part of the job) and carefully remove the bellows from the front panel. Then remove... Read more
Drive belt transfers motor power to drum for tumbling and spinning. Replace when worn, stretched, or broken to restore smooth drum rotation. Verify fit.
Since I hadn't found the Tech Sheet for the washer (which there should be one inside the top cover) I simply thought I'd buy the drive motor (and a new belt, a.k.a "cheap insurance"). Installed the motor once I'd received it from AppliancePartsPros, the washer worked a couple of cycles then gave me the same "SrV CLL" message. I didn't know how to access the error codes on this model but found the info in the Tech Sheet, so I checked it and got an E53 code. Since I'd replaced the motor... Read more
Connects the outer tub to the drain pump in front-load washers. Replace if cracked, torn, leaking, or clogged to stop water damage and restore drainage.
Front shock absorber kit stabilizes the washer tub during spin cycles. Replace worn, loose, or broken dampers to restore smooth operation and stability.
I tore it apart using. YouTube videos to guide me and found the shocks were loose and floppy. I found the shocks in stock here and had them in my hand 2 days later for only $10 shipping! It runs great now! Read more
Flexible drain hose connecting the washer tub to the pump. Replace if cracked, punctured, or torn. Installs behind the service panel with spring clamps.
Our washing machine door boot seal was getting moldy and causing odor problems. Cleaning tablets and bleach weren't helping so it was time to be replaced. While I had the top and front off I changed all the hoses that could be collecting soap scum and mold, all other wetted parts were removed and washed. The video on the door boot seal, and inlet valve assembly were extremely helpful in understanding how these parts are removed and reassembled. Although the door boot seal is the most visible... Read more
Inner door panel for front-load washers. Forms the inner structure of the door and supports the lock mechanism. Replace if cracked, broken, or worn.
I ordered the inside and outer panels. They were delivered in 2 days. Ended up being a 15 minute fix. Very quick delivery and items arrived as expected. Read more
Replaces missing, stripped, or rusted 8-18 thread screws that secure dryer panels, brackets, and components for tight, rattle-free assembly.
It was easy to find the part on appliance parts pros. Once I found it I studied the diagram and determined that there were 3 screws in the drum that needed to be removed. I disconnected power and then removed 3 interior screws. Once I did that I removed the back cover and removed the single screw on the bottom side of the air duct that held it in place connected to the heat tube. I then reversed disassembly. I want to tell you this is a 2 person job. In order to assemble it you need to... Read more
Screens lint and debris from wash water as it exits the tub. Replace if damaged, missing, or clogged to restore proper draining. Verify fit by model number.
Bad drain pump impeller--installed new pump and filter you guys rock! right parts ,right price, on time! Read more
Dryer won't start or stops mid-cycle? This door switch signals when the door is closed, restoring reliable starts. Moderate DIY repair with video guide.
Washer door boot seal creates a watertight barrier between door and drum. Replace if torn, moldy, or leaking during cycles. Verify fit with your model.
Replaced with new bellows from appliance parts pros. Read more
Connects the detergent dispenser to the wash tub in your washer. Replace if cracked, leaking, or causing water damage to other components during cycles.
First of all, I want to say that this is not the first time that I have used AppliancePartsPros. They give you everything you need in the most simplified manner to repair your appliances at home. I ran my washer until I started to see the leak coming from underneath. After verifying that the intake hoses, drain hose and pump were not leaking, I opened up the washer from the top by unscrewing the two screws on the back brackets and lifting up and out. Because the leak was displaying at the... Read more
Fix E90 error codes, unresponsive controls, or mid-cycle shutdowns. This main control board manages all washer functions. Moderate DIY, 20-30 minutes.
Replaced control board. The repair was relatively straightforward, just swap out the board and connect all the wiring clips and light bulb thingees in the right places. The black shafts that connects the cycle selector dial to the rotary switch on the control board was a bit tricky--make sure everything is aligned. Also, my delay start button has a spacer that just fell out and has to be replaced carefully. Washer works perfectly now on all cycles. Thanks, Appliance Parts Pros! Read more
Adjustable leveling leg that screws into the washer cabinet to stabilize and level your appliance. Replace if broken, damaged, or missing to prevent rocking.
After watching YouTube videos on possible cause, went to appliancepartspros and order seal and leveling legs since the had been missing since machne was given to us. Parts came in within the week and replaced . No more leaks!! Read more