Need Help?
Call or text
Replacement screw for washers. Used to secure various components including handles, panels, and internal parts. Order if original is missing or stripped.
After shopping for a new Whirlpool Thin Twin Stack, Found appliance parts pros online and decided to take it apart to see if repair was a possibility. APPro's online instructions were easy to follow, in a couple hours it was apart, and I placed the order. Reg ground took a week from NY, so the laundry piled up that week. The parts arrived on Monday morrning, by afternoon the machine was running like new! The cause was the belt tensioner pulley had frozen. Replaced it, drum wheels,snap... Read more
Secures washer cabinet panels and lid hinge assemblies. Replace when missing, stripped, or corroded to restore a tight fit and eliminate vibration.
Contacted the appliance parts pros, found the parts needed, watched the repair video and installed the parts Read more
Replaces the flexible hose routing water from the dispenser into the washer tub. Order if your flume hose is cracked, leaking, or clogged with deposits.
I figured it had to be the flume; changed the flume and hose, mounting screws Read more
Washer won't start or spin? A broken lid switch actuator prevents the safety switch from engaging. This plastic striker restores proper operation in 5 minutes.
Replace the broken switch Read more
Replace a worn or broken rear self-leveling leg to restore stability. This foot supports the back of your washer and automatically adjusts to uneven floors.
I followed the Appliance Parts Pro's advice videos for the Maytag MAV6451AWW Atlantis washer on replacing the snubber ring and the suspension springs. Everything went just fine except replacing the two rear most suspension springs. None of the videos illustrated REINSTALLING the REAR springs which is extremely difficult because you can't get enough leverage with your arm extended. Observing my frustration, my wife recommended taking off the back side. You can't simply take off the back,... Read more
Washer won't fill or fills slowly? This water inlet valve controls hot and cold water flow. Common DIY fix takes about 20 minutes to install.
Removed old water valve and replaced it with new one. Reconnected wiring and water lines. Everything is working fine now. Read more
Connects suspension spring to washer frame to support the tub. Replace if hook is broken, worn, or missing to restore proper tub suspension and alignment.
If water pools under your washer during the spin cycle, a cracked or kinked drain hose is often the cause. This 70-inch hose takes 5-20 minutes to replace.
Bought a new hose and took one small cover off the back of machine, used pliers to remove clamp, took off old hose, put on new, replaced clamp, replaced cover and was done. Five minutes tops. Read more
Fix washer overflowing or not stopping fill cycle. This water level pressure switch senses tub water and signals control to stop filling. DIY repair.
Filled tub to about 6 inches and inspected washer. Noticed that the tube leading from the air entrapment bubble on the exterior side of the drum had a small leak in it. Clipped off the part of the tube that had the hole in it(it was very close to the connector nipple) reconnected and problem was solved. Read more
Fix a washer that won't stop filling or has water level issues. This pressure switch hose connects the tub to the control switch. Easy 15-minute repair.
Unplugged washer and called for a water truck to pump out basement, 2 feet of water. Read more
Washer making noise or parts wobbling? A worn retaining ring may need replacement. Secures gears and pulleys on shafts. Moderate DIY difficulty.
I took the machine apart and installed a new brake rotor , Brake stator and a snubber ring, after the install the machine works great and no more squeaking. I will say one thing about AppliancePartsPros.com that when I first received the order the brake rotor was new in the sealed bag but the brake material wasn't attached to it, customer service was helpful and sent me a new part the next day. I will use this company again. Read more
Hex head sheet metal screw secures appliance panels, brackets, and trim. Replace missing, stripped, or damaged screws to keep covers firmly attached.
Fix washer leaks and excessive vibration with this tub mounting bolt. Secures the inner tub to the bearing housing, preventing water seepage and noise.
Watched the video on how to replace. Ordered new roller, which was delivered in just a couple of days. Since the roller had broke, I was unable to roll out the refrigerator, so I tilted the refrigerator back and placed a small furniture slider under the roller frame to prevent gouging the wood floor. Then it was easy to slide out the refrigerator and replaced the roller as explained on the video. I had ordered a pin and bolt, just in case I would need to replace, but didn't need them. ... Read more
Fix loud spin cycles or motor vibration issues with this washer drive motor isolator. Reduces noise and stabilizes motor operation. DIY-friendly repair.
Hex washer head screw for dishwashers. Secures door panels, control boards, latches, and internal components. Replace if missing, stripped, or damaged.
Replaced the control board after removing the inner door liner, plastice board cover and board itself, by removing screws, working various plastic clips/tabs and unclipping wire harnesses from board. most of time was spent cleaning the black soot from the door, which had a terrible burnt electrical/plastic fire smell. Cleaned mold/scale off of as much of the door as I could while in there as well. Removing parts without breaking plastic tabs to hold the new parts was trickiest part. Read more
Secures the terminal block to your range's back panel. Replace if stripped, corroded, or missing to ensure safe electrical connections. 10-32 size.
Check the power cord connection to the stove and found burned cable due to loose connection. Replaced the terminal and the nuts and installed a new power cord. Read more