Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Filters debris from water entering your washer and seals the hose connection. Replace if water fills slowly or screens are clogged. Confirm fit by model.
As a Mechanic, I did the common sense approach: INITIAL OBSERVATIONS & CHECKS: - Unplug Machine & check inlet water hose connections for leaks and signs of hose failure; - Remove back panel & inspect for water presence at all hose connections, pump, bottom of basket (bottom center of basket where the main motor, shaft bearing, and tub seal is located), dispensers, bottom of wash basket, water injector area, look everywhere where there is a hose connection and where water flows... - Inspect... Read more
Replacement suspension spring kit for washer tubs. Includes multiple springs that support and stabilize the drum. Needed when springs are broken, stretched, or worn.
I read through the issues related to my problems. I purchased both parts so if one was fixed then the other still needed to be fixed I would have the part. I watched both videos for replacing the parts which made things so much easier. I will say prying in the front clips was the biggest issue out of the whole repair. I repaired the suspension issue by replacing the 4 rods. The very last rod that I replaced was indeed bent. I closed the top and ran one load and then the lid lock issues... Read more
Fix F51 error code or washer not spinning with this rotor position sensor. Moderate DIY repair with video guide. Mounts to bottom of washer under rotor.
Disconnected the water lines and unplugged the washer. Tilted the machine on its front side 3/4 of the way as machine still retains some water even after drain. From bottom of the machine I used an allen wrench to remove screw in center of shroud and remove plastic shroud containing the magnets along its sides thar drives the motor. Then using a 3/8 socket i removed the 4 bolts holding the retaining plate holding the magneto ring. I used a small plastic garbage can side to rest the... Read more
Fix water overflowing from dispensers or leaking behind your washer. This inlet valve controls water flow into the tub. Easy 30-minute DIY repair.
Flexible tube that drains used water from your washer tub to the standpipe. Replace if cracked, leaking at connections, or torn along the length.
After not finding the needed parts to extend the hose at home depot, i turned to online help. I was able to find the right parts quickly on your site and was able to even watch a few videos on how to do the repair. I was beyond amazed that the parts arrived the next day, even though a Saturday and even with standard shipping. I was fortunate enough that my repair did not need any real explanation and the job was done in less than 10 minutes. Felt really good to be able to solve the problem,... Read more
Suspension rod kit connects washer drum to chassis for vibration control. Replace if rods are worn, broken, or detached causing instability during spin.
Specialty tool designed to properly align and press bearings into washer tubs. Essential for secure bearing installation during repair or replacement jobs.
After ignoring for a couple of years that the bearings were bad on our Whirlpool Cabrio washer and just closing the door to the laundry room, it started slinging grease underneath during the spin cycle. Knowing that the cost to call out a repairman would be close to the cost of a new washer, I decided that it would be a nice Saturday project after reviewing AppliancePartsPros’ repair video. The bearing & tub seal kit and bearing installation tool arrived in two days. I’ve done a lot of... Read more
Washer won't drain or shows DRN code? This drain pump removes water from the tub each cycle. DIY-friendly repair with video guide included.
Its under warranty so I called Sears repair. The Technician determined the pump was bad order. After a month of waiting for Sears to order the part and the back and forth on the phone, I looked for the part myself. You guys sent the part and in 2 Days my washer is working again. No word yet, from Sears part order.. Read more
White acrylic spray paint for appliance exterior touch-ups. Restores worn, chipped, or scratched surfaces on refrigerators, ranges, and more. 13 oz can.
Replaced It With New One Read more
Touch-up paint for covering scratches, chips, and minor blemishes on appliance exteriors. Restores appearance and protects surfaces when finish is damaged.
Touch up paint Read more
Fix excessive vibration or spinning issues with this washer tub spanner nut. Secures the basket drum to the gearcase. Requires spanner wrench tool for installation.
We watched the videos posted on AppliancePartsPros.com website several times before starting the work. Once we were confident of the process, we jumped in with the complete disassembly of the washing machine's drum rotating assembly...everything that touched the drum or made it rotate. My son and I disassembled and inspected each part for wear/damage and ordered replacement parts based on condition. The parts came in within 3 days of ordering. My son and I took 3 hours to reassemble and... Read more
Secures water and drain hoses in washers to prevent leaks. Replace if connections loosen or clamp shows corrosion. Confirm fit with your model number.
First off I have to say that Appliance Parts Pro's saved me from hiring a repair person, and quite possibly just getting rid of my washing machine. Their video's helped out SOOOOOOOO much and the advice one of their agents gave me over their online chat helped me trouble shoot something when I got stuck. On top of this they shipped my parts fast enough that less than 12 hrs later they arrived, which allowed me to get my machine up and running way faster than the other options I had available.... Read more
Fix washer shaking, imbalance, or knocking during spin cycle. This vibration absorber pad dampens movement and reduces noise. DIY-friendly repair.
Replaced suspension rods and worn absorber pads Read more
Fix loud spinning noise or slipping agitator issues. This screw secures the basket hub assembly. Single screw sold individually (6 needed).
I had to cut the old agitator out with an oscillating saw in order to access the agitator drive. This is the second Maytag (MVWC 565) I have had to do this to. I first tried removing it by sliding straps under the agitator then then using a jack to pull it loose which did not work either time. One suggestion I have would be to remove debris from tub as you cut in order to prevent it from dropping from the inner tub into the outer tub. Read more
Clicking or tapping noise with no agitation or spin? This washer motor rotor connects the drive motor to the brake housing. DIY-friendly repair.
Unplugged power cord, shut off hot and cold water valves, and disconnected hot and cold water lines. I taped the lid closed and laid washer down on its front panel to access motor parts underneath. Removed center screw (allen wrench) and then removed large, round, plastic rotor (had to use some force with fingers behind it to get it off). I could see that the gear teeth inside the rotor had been partially stripped off ruining the rotor (and causing the noise). I then removed the clutch... Read more
Protective cap that covers the central washplate in your washer tub. Replace if cracked, broken, or missing to prevent debris and clothes from jamming.
Followed instructions. Read more