Thermal Coupler Parts

Best Seller

Genuine Whirlpool part

Thermistor

By: Whirlpool

Part Number: WPW10384183

The Thermistor is an OEM part for Whirlpool refrigerators. It is responsible for monitoring and regulating the refrigerator's temperature by sending temperature readings to the control board, which adjusts the cooling system accordingly. This ensures that the refrigerator maintains a consistent and optimal temperature for food preservation.

You should replace this thermistor if it becomes faulty. Causes of a bad thermistor can include electrical failures, physical damage, or wear and tear over time.

Symptoms of a bad Thermistor include:

Inconsistent or incorrect temperatures in the refrigerator
The refrigerator running continuously or not running enough
Frost buildup or inadequate cooling

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You The freezer was working but the refrigerator compartment was way too warm. Martin T. • Brookfield , IL • July 26, 2020

I tried to buy a new refigerator, but strangely none of the major stores had anything I wanted in stock. The earliest delivery date for a new unit was over a month away. At that I decided to try and keep this one running. I did online research into common refigerator problems. I found the cooling coils in the freezer were covered in a block of ice and frost. The refigerator was not going through a defrost cycle. With a hair dryer I thawed out the coils. The refigerator worked fine for... Read more

$58.95

Compare At:: $70.15
You Save:: $11.20

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Thermal Fuse

5.0 (42)

By: Whirlpool

Part Number: WP9759242

The Thermal Fuse is an OEM part for Whirlpool ovens. It acts as a safety device that cuts off power to the oven if it overheats, preventing potential damage or fire hazards.

Causes of a bad thermal fuse can include prolonged exposure to high temperatures, electrical surges, or faulty oven components that cause overheating. When the fuse blows, it disrupts the electrical circuit, rendering the oven inoperative until the fuse is replaced.

Symptoms of a bad Thermal Fuse include:

The oven not heating up
The control panel not lighting up
The oven not turning on at all
Sudden shutdowns during operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Door won't open after self cleaning cycle
Element will not heat
Little to no heat when baking
Won't start

Do-It-Yourself Stories from Customers like You Stopped working while in self cleaning mode. Eberhard L. • Raleigh , NC • March 17, 2023

This is for the Whirlpool in-wall double oven GBD307PDS10. No power and the door locked after the shutdown before the self-cleaning cycle was over. I watched some video and this is a known issue the fuses blow during self-cleaning. I opened the door with a 90-degree hook, an easy task. Took doors off (watch video from others), unscrewed from the wall, and made a very small platform. and took the oven out (need two people and take the doors off first. The doors are heavy and you won't lift the... Read more

$56.64

Compare At:: $68.79
You Save:: $12.15

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Dishwasher Fuse Kit

4.9 (106)

By: Whirlpool

Part Number: 8193762

The Dishwasher Fuse Kit is an OEM replacement part for Whirlpool dishwashers. It contains the necessary thermal fuses that protect the dishwasher's electrical system from overheating or short circuits. These fuses are critical safety components that help prevent potential fire hazards or damage to the appliance. When replacing this fuse, the included wire harness must be replaced as well.

Symptoms of a blown dishwasher fuse kit include:

The dishwasher not turning on or powering up at all
Error codes related to heating or electrical system issues
Intermittent power failures during wash cycles

Causes of a faulty fuse kit can include electrical surges, wiring problems, component malfunctions leading to overcurrent situations, or simply wear and tear over time.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You All the leds on the front panel were off and there was water sitting in the bottom of the dishwasher from the previous cycle it appears the power was off to the unit Ryan R. • Bedford , NH • October 24, 2015

I first verified the house panel circuit breaker was not tripped. It wasn't so I removed the bottom kick plate of the unit, using a circuit cricket I verified the power feed to the unit was live. The bottom kick plate had a trouble shooting guide in a plastic sleeve which I opened and reviewed. Based on information in there it appeared the TOC was likely the issue. (We recently lost power and used a stand by generator. Previously when we did the the dishwasher had a blinking LED on the... Read more

$48.95

Compare At:: $57.76
You Save:: $8.81

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Turntable Coupler

4.9 (100)

By: Ge

Part Number: WB06X10420

The Turntable Coupler is an OEM part for GE microwaves. It is located underneath the glass turntable in the microwave cavity. It is responsible for transmitting the rotational motion from the motor to the turntable, allowing for even heating and cooking of food.

Causes of a faulty or damaged turntable coupler can include regular wear and tear, physical damage, or improper installation. These factors can result in issues such as the turntable not rotating or spinning irregularly during operation.

Symptoms of a bad turntable coupler may include:

The turntable not rotating when the microwave is in use
Uneven or jerky movement of the turntable
Excessive noise or vibration during operation

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This part fixes the following symptoms

Tray won't turn

Do-It-Yourself Stories from Customers like You Microwave turntable not working Weldon P. • San Antonio , TX • July 17, 2014

Found coupler between motor and turntable broken. Ordered from this site. Upon receipt, replaced broken coupler with new one. Turntable back to normal. Read more

$10.76

Compare At:: $12.80
You Save:: $2.04

IN STOCK

Ships Today Guaranteed

Add to Cart

Do you need help?

Get Questions Answered Instantly.

1-877-477-7278 Online

Live Help

Best Seller

Genuine Whirlpool part

Thermal Fuse

4.9 (80)

By: Whirlpool

Part Number: WP9759243

The Upper Oven Thermal Fuse is an OEM part compatible with Whirlpool double wall ovens. Located near the upper oven heating element, this safety device protects the upper oven cavity from excessive heat rises. If temperatures get too high, the fuse automatically cuts power to prevent overheating.

Symptoms of a blown upper oven thermal fuse include:

The upper oven failing to heat or losing total heating function
Burning smells emanating from the upper oven cavity
Safety shutdown errors related to over-temperature conditions

Common causes are airflow restriction trapping heat or faulty wiring allowing overheating. Natural aging also deteriorates fuses over extended use cycles.

Compatible brands include KitchenAid, Jenn-Air and some Kenmore wall oven models.

This part fixes the following symptoms

Won't start
Element will not heat
Little to no heat when baking

Do-It-Yourself Stories from Customers like You Stopped working while in self cleaning mode. Eberhard L. • Raleigh , NC • March 17, 2023

$49.95

Compare At:: $59.44
You Save:: $9.49

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Outlet Thermal Fuse

4.7 (20)

By: Frigidaire

Part Number: 134711401

The Outlet Thermal Fuse is an OEM part for Frigidaire dryers. It acts as a safety device that protects the dryer from overheating by cutting off the power if the temperature exceeds a safe level. This ensures the dryer operates safely and helps prevent potential fire hazards.

Causes of a bad thermal fuse can include lint buildup blocking airflow, overloading the dryer, or mechanical failures in the heating element. These issues can cause the dryer to overheat, leading to the fuse blowing as a protective measure.

Symptoms of a bad outlet thermal fuse include:

The dryer not starting
The dryer running but not heating
Sudden stopping during a cycle
No power to the dryer

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You E63 error code and dryer overheating William S. • Ladson , SC • May 03, 2014

Replaced exhaust thermal cutoff switch. Sears wanted to charge for a service visit + parts and labor. $17 part, $6 shipping and I received the part the following day. Repair complete in less than an hour at a fraction of the cost. Thanks appliance pros. Read more

$34.95

Compare At:: $41.59
You Save:: $6.64

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Thermal Fuse

4.9 (40)

By: Whirlpool

Part Number: 675813

The Thermal Fuse is an OEM part for Whirlpool dishwashers. It serves as a crucial safety component that prevents the appliance from overheating by cutting off electrical power if the temperature inside the dishwasher becomes too high. This helps protect both the dishwasher and your home from potential fire hazards.

Causes of a bad thermal fuse can include overheating due to blocked air vents, malfunctioning components that lead to excessive heat, or electrical surges that damage the fuse. Over time, regular wear and tear can also contribute to the fuse's failure.

Symptoms of a bad thermal fuse include:

The dishwasher not starting or running
The control panel not responding
The dishwasher stopping unexpectedly mid-cycle
No indicator lights or sounds when attempting to operate the dishwasher

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You Dishwasher just stopped working, no power Michelle W. • Gillett , WI • April 05, 2014

My friend researched online what would make a dishwasher just stop working, no power. The person on the you tube video showed how to first start with the thermal fuse. Then searched online for the thermal fuse. You had the part for a small price. I felt it was worth trying to see if that may be the issue. IT WORKED!! I was without a dishwasher for over a year, was planning to by a brand new one but for $23.00 now have a working dishwasher!! YEAH! Read more

$45.95

Compare At:: $54.22
You Save:: $8.27

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

High Limit Thermostat

5.0 (4)

By: Ge

Part Number: WE04X26139

The High Limit Thermostat is an OEM part for GE dryers. This thermostat plays a critical role in monitoring the temperature within the dryer and shutting off the heating element if it becomes too hot, thereby preventing overheating and potential fires.

Causes of a bad high limit thermostat can include wear and tear from regular use, electrical issues such as short circuits, or exposure to excessively high temperatures, which can impair its ability to function properly.

Symptoms of a bad High Limit Thermostat include:

The dryer not heating
The dryer overheating
The dryer shutting off unexpectedly
Extended drying times

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer dead Kenneth N. • Panama City Beach , FL • August 30, 2020

Found open thermal fuse. While it was apart, cleaned out all the lent and lubed drum bearing. Read more

$20.95

Compare At:: $24.93
You Save:: $3.98

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Heat Sensor

4.8 (34)

By: Frigidaire

Part Number: 5303281135

The Dryer Heat Sensor is an OEM part for Frigidaire dryers. This sensor monitors the temperature inside the dryer drum to ensure clothes are dried effectively and safely by regulating the heat levels during the drying cycle.

Causes of a bad heat sensor can include wear and tear from frequent use, buildup of lint or debris, or electrical issues. A malfunctioning sensor can result in incorrect temperature readings, leading to under-drying or overheating of clothes.

Symptoms of a bad Dryer Heat Sensor include:

Clothes not drying properly or taking too long to dry
Dryer overheating or shutting off unexpectedly
Inconsistent drying cycles
Error codes related to temperature control

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms

No heat or not enough heat

Do-It-Yourself Stories from Customers like You Our dryer didn't heat Larry L. • Poway , CA • November 10, 2014

Being a complete DIY I hate to call some unknown person into my home knowing that just to get them there will cost me more than I will spend for parts that I don't need.After all, they are trying to make a living and by selling me parts that I don't need will increase their profits. I've dealt with APP before and was impressed by their site because I could find both mechanical and electrical drawings for almost everything I have. I looked up my dryer, decided what was probably the problem,... Read more

$38.95

Compare At:: $55.90
You Save:: $16.95

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Hi-Limit Thermostat

4.8 (20)

By: Whirlpool

Part Number: WP3390291

The Hi-Limit Thermostat is an OEM part for Whirlpool dryers. It plays a crucial role in ensuring the dryer operates at safe temperatures by cutting off power to the heating element if the dryer overheats. This safety mechanism helps prevent potential fires and damage to the appliance.

Common causes of a bad thermostat include normal wear and tear, exposure to excessive heat, or electrical malfunctions.

Symptoms of a bad hi-limit thermostat include:

The dryer not heating
The dryer overheating
The dryer shutting off unexpectedly during a cycle
Longer drying times

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You No heat in dryer J B. • Freeport , FL • September 19, 2014

Changed parts Read more

$53.95

Compare At:: $63.66
You Save:: $9.71

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

High Limit Thermostat

4.8 (8)

By: Whirlpool

Part Number: WPW10195091

The High Limit Thermostat is an OEM part for Whirlpool dishwashers. It is a safety device that monitors the temperature inside the dishwasher and cuts off power to the heating element if the water temperature exceeds safe levels, preventing overheating and potential damage.

Causes of a bad high limit thermostat can include normal wear and tear, exposure to high temperatures, or electrical faults. A faulty thermostat can prevent the dishwasher from heating water correctly, affecting the cleaning performance.

Symptoms of a bad high limit thermostat include:

Dishwasher not drying dishes properly
Dishwasher not completing cycles
Water not heating up during cycles
Error codes related to temperature issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Groaning sounds. Leaking under dishwasher. Failing to clean dishes and melting dishes. Dan G. • Wheaton , IL • July 20, 2018

Replaced sump, wash pump, drain pump, diverter motor, and thermostat. Read more

$40.95

Compare At:: $49.14
You Save:: $8.19

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Rotating Ring Assembly

4.9 (29)

By: Ge

Part Number: WB06X10633

The Rotating Ring Assembly is an OEM part for GE microwaves. This part supports the microwave's glass tray, enabling it to rotate smoothly during operation. The rotating ring assembly ensures even cooking or heating by distributing microwave energy uniformly across the food.

Causes of a bad rotating ring assembly can include cracks or breaks in the ring itself, worn-out rollers from continuous use, or debris accumulation that hinders smooth rotation.

Symptoms of a bad Rotating Ring Assembly include:

The microwave's glass tray not rotating or rotating unevenly.
Unusual noises coming from the bottom of the microwave where the ring is located.
Inconsistent cooking or heating of food, leading to cold spots.
Difficulty in turning the glass tray by hand when the microwave is off, indicating obstruction or damage to the ring assembly.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Tray won't turn

Do-It-Yourself Stories from Customers like You Rotating ring assembly wound not rotate Anthony C. • Chicago , IL • April 25, 2015

I bought a new rotating ring assembly and now it works again. Read more

$16.46

Compare At:: $19.59
You Save:: $3.13

IN STOCK

Ships Today Guaranteed

Add to Cart

Shop With Confidence

Over 15 million customers served!

365-Day Returns

Hassle-free Returns

Fast Delivery

1.7 Days on Average!

Free Tech Support

On all purchased parts!

Best Seller

Genuine Whirlpool part

High Limit Thermostat

4.9 (37)

By: Whirlpool

Part Number: WP303395

The Whirlpool High Limit Thermostat is an OEM component for Whirlpool dryers, designed to prevent the dryer from overheating by shutting off the heat when the dryer reaches a certain temperature. This safety mechanism is crucial for preventing fires and maintaining the longevity of your dryer.

Symptoms of a bad High Limit Thermostat include:

Clothes taking longer than usual to dry
Dryer not producing any heat
Overheating of the dryer exterior

These issues may arise due to a malfunctioning thermostat, which can occur from a buildup of lint and debris blocking proper airflow, a faulty heating element that causes the dryer to overheat, or wear and tear over time.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models, ensuring a wide range of applicability and reliability for maintaining your dryer's performance.

Do-It-Yourself Stories from Customers like You Would run fine but would not dry clothes something would not allow the dryer to heat Todd K. • Burr Oak , MI • March 10, 2017

For several months we could smell a slight odor of propane in the laundry room and wondered why, just didn't seem like it was enough to be overly concerned, but thought something must be wrong with the dryer, but it was still working. We just didn't know how inefficiently. Then the extra time it took to dry a load of clothes progressively seemed to get longer, but things still seemed to work fine and the clothes got dried, given enough time. Then approximately 3 weeks ago we noticed the dryer... Read more

$35.56

Compare At:: $43.52
You Save:: $7.96

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Fuse

4.7 (10)

By: Frigidaire

Part Number: 5304509451

This Fuse is an OEM part for Frigidaire microwaves. It's a critical safety component designed to protect the microwave from electrical overload by breaking the circuit if the current is too high. This fuse is specifically tailored to fit and function properly with Frigidaire microwave models, ensuring safety and reliability.

Fuses in microwaves can blow due to power surges, electrical faults within the appliance, or overheating caused by restricted airflow or malfunctioning components. A blown fuse prevents the microwave from operating as a safeguard against potential electrical damage or fire hazards.

Symptoms of a blown fuse include:

The microwave suddenly stops working and doesn't turn on.
No response from the microwave's control panel or display.
The microwave is completely unresponsive, even when the door is opened or closed.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

Do-It-Yourself Stories from Customers like You The frigidaire microwave would blow fuses on a regular basis Loren A. • Windsor , WI • November 28, 2020

After doing some research the problem appeared to be the door safety switches. I ordered 3 new ones to replace all the original ones. Some minor disassembly of the microwave front was required to reach the fuse and switches. To reach the switches the control panel wires needed to be unplugged and the panel removed. After doing that replacing the switches was pretty strait forward. As of this comment the microwave has worked for 5 days without blowing the fuse so far. This has probably fixed the... Read more

$11.30

Compare At:: $12.43
You Save:: $1.13

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

High Limit Thermostat

5.0 (2)

By: Ge

Part Number: WE04X26138

The High Limit Thermostat is an OEM replacement part for GE electric dryers. Located internally near heating components, this safety device monitors drum temperatures to prevent excessive heat accumulation.

Causes of malfunction relate to water residues creating shorts, loose terminals detaching wiring due to vibrations, or a worn heat sensitive mechanism reacting slower over time.

Symptoms involve:

Repeated thermal cut-off trips mid-cycle
Inability to select heat settings without errors shown
Bleach or smoke smells indicating unregulated temperatures

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You High temp sensor blew out drier would not light. Gary H. • Boonville , NY • May 16, 2020

Did continuity tests on the sensors, till I figured out what one was bad. Read more

$6.53

Compare At:: $8.36
You Save:: $1.83

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Rotating Ring

5.0 (16)

By: Ge

Part Number: WB02X32600

The Rotating Ring is an OEM part for GE microwaves. This component sits beneath the microwave's glass turntable and facilitates its smooth rotation, ensuring even heating and cooking of food by distributing microwave energy uniformly.

Causes of a bad rotating ring can include regular wear and tear from continuous use, damage from spills or heavy items placed on the turntable, and warping from exposure to high temperatures.

Symptoms of a bad rotating ring include:

The turntable not rotating or moving unevenly
Unusual noises during microwave operation
Uneven cooking or heating of food
Visible damage, cracks, or warping on the ring

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Ge adventium 120 sparking while microwaving Robert H. • Takoma Park , MD • October 18, 2015

Simply replace the part, lift old one out, put new one in! Read more

$60.77

Compare At:: $72.32
You Save:: $11.55

IN STOCK

Ships Today Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Thermal Coupler Parts

Thermistor

Thermal Fuse

Dishwasher Fuse Kit

Turntable Coupler

Thermal Fuse

Outlet Thermal Fuse

Thermal Fuse

High Limit Thermostat

Heat Sensor

Hi-Limit Thermostat

High Limit Thermostat

Rotating Ring Assembly

High Limit Thermostat

Fuse

High Limit Thermostat

Rotating Ring

Appliance Type

Brands