Gibson Obstructed Lid Switch Door Lock Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 316436001
The Large Surface Element Switch is an OEM replacement part for Frigidaire ranges and cooktops. It is a component that controls the power and temperature settings for one of the larger surface heating elements on the appliance.
Symptoms of a faulty Large Surface Element Switch include:
- Difficulty in adjusting or maintaining consistent heat settings
- The surface element not heating up or cycling on and off unexpectedly
- Flickering or erratic behavior of the surface element
- Burning smell or visible signs of overheating
Causes of a bad large surface element switch can include normal wear and tear, exposure to excessive heat or moisture, or electrical malfunctions.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore range and cooktop models.
This part fixes the following symptoms
-
Won't start
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
The front left element (8 inch) would stay hot on lower control settings. Michael S. • West Seneca , NY • September 13, 2022
After an internet search, the likely problem was a faulty "Element Switch.." I actually unplugged the stove and removed the switch (I did NOT disconnect the wires). I obtained the part number on the switch, disassembled it, observed that the contacts were highly degraded, reassembled the switch and reinstalled it back into the stove. This all provided confidence the SWITCH was faulty.
One switch on the AppliancePartsPros.com website (AP2591804) looked exactly like the switch in the stove...
Read more
More
$34.57
- Compare At:
-
$41.14
- You Save:
-
$6.57
Genuine Frigidaire part
By: Frigidaire
Part Number: 131763256
The Front Loading Washer Door Lock and Switch Assembly is an OEM part for Frigidaire washing machines. This component ensures that the washer door is securely locked during operation, preventing leaks and interruptions, and also communicates with the control board to allow the wash cycle to start.
Causes of a bad door lock and switch assembly can include wear and tear from regular use, damage from forced door opening, electrical failures within the locking mechanism, or issues with the switch contacts.
Symptoms of a bad door lock and switch assembly include:
- The washer door not locking or unlocking properly
- Error codes related to the door lock
- The washer not starting its cycle
- Interruptions in the wash cycle due to door lock failures
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
My washer would not complete the spin cycle and wring the water out of the clothes Lisa C. • Spring Lake , NC • March 12, 2014
I ran a diagnostics check on the washing machine and came up with the error code E47 -Board thinks the door PTC circuit is open in spin. The washer thought the door was open and would not finish the spin. I was left with a washer full of very wet clothes. This repair was SO extremely easy. I only needed to uses a pair of needle nose pliers and a screw driver. It took less than 10 minutes, start to finish. Now the new door lock assembly registers correctly and my clothes are completely...
Read more
More
$113.95
- Compare At:
-
$136.74
- You Save:
-
$22.79
Genuine Frigidaire part
By: Frigidaire
Part Number: 131763302
The Door Strike is an OEM part for Frigidaire washing machines. It is a critical component that interacts with the door latch, securing the washing machine door during operation. This ensures that the door remains closed and locked throughout the washing cycle, preventing water leaks and maintaining the safety and integrity of the appliance.
Symptoms of a bad Door Strike include:
- The washing machine door not closing or locking properly,
- The washer not starting due to the door not registering as closed,
- Visible signs of damage or wear on the strike, such as cracking or deformation.
Causes of door strike failure typically involve physical damage from forceful closing of the washer door, general wear from repeated use, or material fatigue.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Lid or door will not open
-
Won't start
-
Lid or door won't close
See more...
Do-It-Yourself Stories from Customers like You
Door striker was broke Richard A. • Milford , DE • March 18, 2014
Just removed the old and put on the new,simple.On this Fridgidare washer you should lift the door as you close it which should make the striker last..
Read more
More
$27.30
- Compare At:
-
$32.21
- You Save:
-
$4.91
Genuine Frigidaire part
By: Frigidaire
Part Number: 297147700
The Freezer Door Key is an OEM replacement part for Frigidaire refrigerators. This small but essential component is designed to securely lock the freezer door, preventing accidental openings or unauthorized access.
Symptoms of needing to replace the freezer door key include:
- Difficulty in locking or unlocking the freezer door
- The key not fitting properly or becoming stuck in the lock
- Visible wear, damage, or breakage of the key itself
Causes of a faulty freezer door key can include normal wear and tear over time, physical damage due to impact or mishandling, or issues with the locking mechanism itself.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.
Do-It-Yourself Stories from Customers like You
The seal around the door was not sealing Ron W. • Bakersfield , CA • September 22, 2014
Ordered a new seal, and replaced it with a new one freezer works great now.
Read more
More
$10.95
- Compare At:
-
$13.14
- You Save:
-
$2.19
Genuine Frigidaire part
By: Frigidaire
Part Number: 131658800
The Door Catch is an OEM part for Frigidaire dryers. It secures the door closed during cycles. This allows the machine to safely run without the risk of the door opening, which could pause the drying process or pose a safety hazard. Constructed from durable materials, this door catch is designed to endure the frequent opening and closing of the dryer door, offering reliability and longevity.
Causes of a bad door catch include mechanical wear from regular use, accidental damage, or misalignment of the door.
Symptoms of a bad Door Catch include:
- The dryer door won't stay shut during cycles
- Difficulty closing the dryer door securely
- The need to apply extra force to close the door
- The dryer stops running due to the door opening mid-cycle
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
This part fixes the following symptoms
-
Door won't close
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Drum stopped turning loud 60 hz hum from motor James S. • Winchester , TN • November 03, 2018
The very easy diagnosis was motor seizure. Because the machine is about a decade old, I decided to renovate most of the guts. My DIY project included replacing the motor, blower, drum bearing, belt, and door hinge. The end result is a functional dryer with no left-over parts.
Lack of parts and hardware challenged the effort. For example, the blower assembly did not have the slide capture for the motor. I had to use the old one which is showing its age. With the exception of the drum...
Read more
More
$50.78
- Compare At:
-
$59.92
- You Save:
-
$9.14
Genuine Frigidaire part
By: Frigidaire
Part Number: 134398300
The Turn Start Switch is an OEM part for Frigidaire dryers. It is responsible for initiating the drying cycle when the switch is turned. This switch is a critical component that engages the dryer’s motor and starts the drying process, ensuring your clothes are dried effectively.
You should replace the turn start switch if it becomes faulty or unresponsive. Causes of a bad start switch can include regular wear and tear from frequent use, electrical issues, or damage due to excessive force or mishandling.
Symptoms of a bad turn start switch include:
- Dryer not starting when the switch is turned
- Intermittent starting issues
- The switch feeling loose or not engaging properly
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Knob broke on dryer started using pliers to turn it on eventually the stem broke off the start switch Lisa I. • Cocoa , FL • December 13, 2015
Got the model number off the dryer. Looked it up online. I wanted name brand replacement part. Found this wonderful AppliancePartsPros.com. Looked up my model number, went to top control panel section, ordered the Start Switch. In ONE DAY I received it. Removed the back part of my dryer. Easily removed the broken part. (I did watch a video online). Put on the new Start Switch. Instead of ordering a new knob. I removed a knob from the dryer that I don't use. It turns a buzzer on or off to let...
Read more
More
$59.95
- Compare At:
-
$71.34
- You Save:
-
$11.39
Genuine Frigidaire part
By: Frigidaire
Part Number: 216822900
The Door switch is an OEM replacement part for Frigidaire refrigerators. This part turns the light on/off as the door opens and closes.
Causes of a faulty door switch include normal wear of electrical contacts from repetitive on/off cycles. Moisture exposure may potentially corrode internal connections.
Symptoms of a bad light/switch include:
- The interior light fails to turn on when the door is opened
- The light stays on when the door is closed, leading to potential overheating
- An impact on the refrigerator’s temperature regulation due to the switch not signaling the door's closure
This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Frigrdaire up right alarm beeping door ajar Thelma L. • Zirconia , NC • January 08, 2016
REPLACED THE LIGHT/LAMP SWITCH.
Read more
More
$57.22
- Compare At:
-
$68.66
- You Save:
-
$11.44
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304406520
The Refrigerator Door Gasket Clips are OEM parts for Frigidaire refrigerators. These clips secure the door gasket in place, ensuring a tight seal to maintain the internal temperature and prevent cold air from escaping. This pack contains 40 clips, which secure the interior trim pieces and hold the gasket and liner to the freezer lid.
Over time, the gasket clips can become damaged or worn out due to frequent opening and closing of the refrigerator door, exposure to moisture, or accidental impacts. If the clips fail, the door gasket may not stay in place, compromising the refrigerator's efficiency.
Symptoms of bad refrigerator door gasket clips include:
- The door gasket not staying securely in place
- Visible damage or wear on the clips
- Cold air escaping from around the door
- Increased energy consumption due to poor sealing
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The seal around the door was not sealing Ron W. • Bakersfield , CA • September 22, 2014
Ordered a new seal, and replaced it with a new one freezer works great now.
Read more
More
$72.41
- Compare At:
-
$74.13
- You Save:
-
$1.72
Genuine Frigidaire part
By: Frigidaire
Part Number: 241689106
The Dispenser Switch is an OEM replacement part for Frigidaire refrigerators. It is a component that controls the operation of the water and ice dispenser, allowing users to conveniently access chilled water, cubed ice, or crushed ice from the refrigerator door.
Symptoms of a bad dispenser switch:
- Failure of the water or ice to dispense when the lever or button is activated
- Erratic or inconsistent dispensing behavior
- Water or ice continuously dispensing without user input
- Leaks or moisture around the dispenser area
Causes of a bad dispenser switch can include mechanical wear and tear, electrical malfunctions, or physical damage due to mishandling or impact.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.
Do-It-Yourself Stories from Customers like You
Water dispensor would only work when you depressed the paddle then brought back to find the "sweet spot" Joseph V. • Bargersville , IN • January 16, 2026
I had the original sensors in my Frigidaire, which were now about 18 years old. The water dispenser would work, but I would have to push in the lever and then draw it back until it found that "sweet spot." I finally got annoyed enough with the problem that I looked online. I almost purchased the dispenser actuator (the paddle), and glad I didn't because it was not the problem. Unless your lights are out, or it broke, the culprit will be these little dispenser switches which get pressed...
Read more
More
$11.95
- Compare At:
-
$14.10
- You Save:
-
$2.15
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303935086
The Surface Unit Switch Kit is an OEM part for Frigidaire ranges. It controls the power and heat levels to the surface burners on the cooktop, allowing you to adjust the temperature for cooking. This kit typically includes the necessary components to replace a faulty switch and restore proper functionality to the burners.
Causes of a bad surface unit switch can include electrical malfunctions, wear and tear from regular use, or damage due to spills or impacts. A faulty switch can prevent the burner from heating correctly or at all.
Symptoms of a bad surface unit switch include:
- Burners not heating up or heating unevenly
- Inability to adjust the burner temperature
- Burners not turning on or off properly
- Sparks or electrical odors near the switch
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
My kenmore electric range burners were constantly on high Eric M. • Long Beach , CA • January 23, 2017
When I called customer service your representative at Appliance Parts Pros was able to help me diagnose the problem and order the two parts that I needed. both parts arrived the next day and with helpful tutorial videos I was able to replace both the Surface Unit Switch and the Universal Element in less than 45 minutes.
Thanks so much for the great service and the money you saved me.
Read more
More
$42.95
- Compare At:
-
$51.11
- You Save:
-
$8.16
Genuine Frigidaire part
By: Frigidaire
Part Number: 154773201
The Water Level Float Switch Assembly is an OEM replacement part for Frigidaire dishwashers. It uses a floating switch design to accurately sense water levels filling and draining during cycles. Proper level detection allows for optimized wash and rinse action and water volume control.
Causes of a bad float switch assembly can include wear and tear over many years of use, interfering with free float movement. Mineral or scale deposits may accumulate on float components, inhibiting functionality. Physical damage from impact could introduce leaks.
Symptoms of a bad float switch assembly include issues such as:
- Inability to properly detect water levels
- Long fill or drain times
- Failure to fill or drain completely
- Potential overflow or standing water issues
- Error codes pointing to level sensor faults
This OEM Frigidaire replacement part is also compatible with some Electrolux, Westinghouse, and Kenmore dishwashers.
Do-It-Yourself Stories from Customers like You
Dishwasher would not fill Eric D. • Indianapolis , IN • March 02, 2020
Replacing the inlet valve solved the problem. The old valve was somehow clogged with white sediment. I probably could have taken it off and cleaned it out if I'd known, but replacing the valve was much easier. Took about half an hour to repair. Video walk through was extremely helpful. Great to have a working dishwasher again!
Read more
More
$54.26
- Compare At:
-
$64.57
- You Save:
-
$10.31
Genuine Frigidaire part
By: Frigidaire
Part Number: 240338313
The Dairy Door is an OEM replacement part for Frigidaire side-by-side refrigerators. As the access point to the dedicated dairy compartment, the door is designed with precision seals to maintain optimal humidity levels inside. This helps keep dairy and other perishable items fresh longer.
Causes of a bad dairy door can include worn or damaged seals, dents or impacts warping the door frame, or issues with the electronic components that control humidity levels.
Symptoms of a bad dairy door include:
- Excessive frost or ice buildup inside the dairy compartment
- Difficulty opening and closing the door smoothly
- Warm or dried-out dairy products despite a cold refrigerator interior
- Moisture leaks around the door seals
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore side-by-side models.
Do-It-Yourself Stories from Customers like You
Broken dairy door Granya G. • Pembroke Pines , FL • February 08, 2019
Simple... I called Appliance Parts Pros. I´ve used them on several other occasions for other appliances parts and I´ve always received fast and efficient service.
Thanks guys & gals.
Great job...!!!
Read more
More
$61.95
- Compare At:
-
$73.72
- You Save:
-
$11.77
Genuine Frigidaire part
By: Frigidaire
Part Number: 154745503
The Toeplate is an OEM part for Frigidaire dishwashers, specifically designed to fit seamlessly at the bottom of your appliance. This toeplate not only enhances the aesthetic appeal of your dishwasher by hiding the space beneath the appliance but also serves as a protective barrier, preventing debris from getting under the dishwasher.
Causes of a bad toeplate include physical damage such as dents, cracks, or warping, often resulting from accidental kicks or impacts. Additionally, improper installation can lead to a loose or misaligned toeplate, which may compromise its functionality and appearance.
Symptoms of a bad toeplate include:
- Visible damage or deformation.
- Difficulty in fitting or securing the toeplate to the dishwasher.
- Increased noise or vibration due to lack of insulation or support.
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Needed a kick plate Cristian A. • Hixson , TN • April 19, 2015
Easy job, I screwed the parts to the dishwasher
Read more
More
$23.95
- Compare At:
-
$28.26
- You Save:
-
$4.31
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303207102
The Door Strike is an OEM part for Frigidaire dryers. It is a small, essential component that ensures the dryer door remains securely closed during operation. The door strike engages with the door catch to keep the door latched, allowing the dryer to operate efficiently and safely. Without a functioning door strike, the dryer may not start, or it could stop mid-cycle.
You should replace this door strike if it becomes damaged or worn out. Over time, the door strike can suffer from wear due to regular use, misalignment, or accidental impact, leading to issues with the dryer door latching properly.
Symptoms of a bad door strike include:
- The dryer door not staying closed
- The dryer not starting or stopping unexpectedly
- Difficulty in latching the dryer door
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Frigidaire dryer door would not stay closed Carolina L. • Miami , FL • September 08, 2015
My dryer door would not stay shut because the door strike was stuck in the door catch. I was afraid that when I pulled the strike out, it would damage the catch, so I ordered the door strike and door catch.
I got the damaged door strike out with needle nosed pliers in about 15 seconds. The door catch was in perfect condition so I didn't need to use the one I ordered. So then I proceeded to install the new door strike. That took me about 15 minutes because I did not have the manual strength to...
Read more
More
$28.95
- Compare At:
-
$34.45
- You Save:
-
$5.50
Genuine Frigidaire part
By: Frigidaire
Part Number: 154388801
The Dispenser Cap is an OEM part for Frigidaire dishwashers. It is a crucial component of the detergent dispensing system, designed to securely cover and seal the detergent dispenser when the dishwasher is not in operation.
Symptoms of a bad dishwasher dispenser cap:
- Leakage of water or detergent from the dispenser area
- Difficulty in opening or closing the dispenser cap
- The cap not sealing properly, allowing moisture or debris to enter
- Cracks or damage to the cap, preventing a secure fit
Causes of a faulty dishwasher dispenser cap can include wear and tear over time, exposure to high temperatures or harsh detergents, or physical damage from mishandling or impact.
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models.
Do-It-Yourself Stories from Customers like You
The dishwasher left by tenant with the cover panel loose on the left the door hyperextending a bit when opened. Marlena R. • Star City , IN • July 07, 2021
Took cover completely off and tried putting back, could not match up left screw with available screw hole. Tried many different configurations and sequences to make this happen. watched a video on changing the front panel, the door in it had four screws, mine 2, no help there. Searched on the hyperextending issue, found an article about dogs and kids [had both here] climbing on the door and to check the springs and linkages. Linkages intact both sides, R [opposite] side spring very stretched....
Read more
More
$34.95
- Compare At:
-
$41.59
- You Save:
-
$6.64
Genuine Frigidaire part
By: Frigidaire
Part Number: 134399700
The Start Switch is an OEM replacement part for Frigidaire dryers. This part initiates the dryer's cycle once the user selects the desired settings. By pressing the start switch, the motor activates, and the drying process begins, ensuring clothes are dried according to the selected specifications.
Symptoms of a bad Start Switch include:
- The dryer not starting when the switch is pressed
- Intermittent starting issues, where the dryer sometimes starts and sometimes doesn’t
- The need to hold the switch in place to keep the dryer running
- Unusual noises when the switch is pressed
Causes for a malfunctioning Start Switch can include electrical issues, such as faulty wiring or connections, wear and tear from frequent use, or internal failures within the switch mechanism that prevent it from signaling the motor to start.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dryers.
Do-It-Yourself Stories from Customers like You
Start switch knob broke off. Jeff O. • Laurier , WA • March 07, 2018
I went online, ordered the part and installed it,,, took 15 minutes to install,,,saved huge $$$
easy peasy!! :-)
Read more
More
$64.95
- Compare At:
-
$77.29
- You Save:
-
$12.34