Thermador Non-Serviceable Motor Parts

The Circulation Motor and Heater Assembly is an OEM part for Bosch dishwashers. It includes both the circulation motor, responsible for moving water through the dishwasher during the cleaning cycle, and the integrated heater, which raises the water temperature for effective cleaning and drying.

Symptoms of a bad Circulation Motor and Heater Assembly include:

• Dishwasher fails to clean dishes properly
• Water does not heat up, leading to poor drying results
• Unusual noises during the cycle 

A bad part can result from several causes, such as electrical failures, mechanical wear and tear, or blockages in the system that prevent proper water circulation or heating. 

If you notice any of these signs, it's time to replace the circulation motor and heater assembly. This OEM Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Drain Pump is an OEM part for Bosch dishwashers. It is designed to remove water from the dishwasher's tub after the wash and rinse cycles, ensuring that the dishwasher drains properly. This pump expels the used water through the drain hose and into the household drainage system, maintaining the efficiency and hygiene of the appliance.

You should replace the drain pump if it becomes faulty. Causes of a bad drain pump can include wear and tear from regular use, blockages from debris or food particles, or electrical failures. A malfunctioning pump can lead to water not draining properly, which can affect the dishwasher's performance and cause water to pool inside.

Symptoms of a bad drain pump include:

• Water not draining from the dishwasher
• Unusual noises such as humming or grinding during the drain cycle
• Error codes related to drainage issues
• Water pooling at the bottom of the dishwasher

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Drain Pump is an OEM part for Bosch dishwashers. This pump is responsible for removing water from the dishwasher after each wash and rinse cycle, ensuring proper drainage and preventing water from pooling inside the dishwasher.

You should replace the drain pump if it becomes clogged, damaged, or fails electrically. Common causes of a bad drain pump include debris buildup, mechanical wear, or failure of internal components due to regular use.

Symptoms of a bad drain pump include:

• Water not draining from the dishwasher
• Unusual humming or buzzing noises during the drain cycle
•  Dishwasher stopping mid-cycle with water remaining inside
•  Error codes related to drainage issues

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Drain Pump is an OEM replacement part for Bosch dishwashers. It is responsible for pumping out dirty water from the dishwasher tub at the end of each cycle. The drain pump works to thoroughly empty the tub in a timely manner to facilitate a smooth transition to the next cycle.  

Causes of a bad drain pump can include a clogged impeller or blockage of debris inside the pump housing that inhibits proper water flow. 

Symptoms of a bad drain pump include:

• Incomplete draining of water at the end of cycles 
• Water remaining or pooling at the bottom of the tub
• Loud grinding or clicking noises emanating from the pump area
• Cycles failing to advance or resume properly

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers.

Note: Due to a factory design change, connector part# 00623143 may also be needed.

The Drain Pump is an OEM part for Bosch dishwashers. This pump is responsible for removing water from the dishwasher at the end of the wash and rinse cycles, ensuring that the appliance functions efficiently and that dishes are properly cleaned and dried.

Over time, the drain pump can become clogged with debris, suffer from electrical issues, or experience mechanical wear. These issues can lead to the pump failing to remove water effectively, impacting the overall performance of the dishwasher.

Symptoms of a bad Drain Pump include:

• Water not draining from the dishwasher
• Unusual noises during the drain cycle
• Error codes related to drainage issues
• Water pooling at the bottom of the dishwasher

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Circulation Pump and Motor Assembly is an OEM component specifically designed for Bosch dishwashers. This assembly combines a circulation pump and motor to drive water flow through critical wash cycles. 

Symptoms of a bad circulation pump and motor assembly include:

• Inadequate or inconsistent water flow during washing and rinsing cycles
• Loud or grinding noises coming from the circulation pump motor
• Lengthened cycle times due to reduced water pressures 

Over time, pump impellers and motor components can degrade, leading to diminished performance. If your Bosch dishwasher exhibits any of the above issues, replacing the circulation pump and motor assembly with this OEM part is recommended.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers.

This evaporator fan motor circulates cold air across the evaporator coils and throughout the fresh food and freezer compartments. Replacing a weak or failed motor restores proper airflow for consistent cooling and ice production.

• Moves air over the evaporator to maintain even temperatures
• Common failure signs: freezer getting warm, fridge section not cooling well, weak or no airflow from vents, intermittent humming or squealing, motor not running
• May help resolve frost buildup around the evaporator due to poor airflow
• Electrical component; match connectors and orientation during install

• Unplug refrigerator before service; wear cut-resistant gloves
• Access from the rear of the freezer/evaporator cover; remove shelves/panels as needed
• Transfer any mounting hardware, grommets, or fan blade from the original if not reusable
• Ensure fan spins freely and blade is correctly oriented before reassembly

The Ice Auger Gear Motor is an OEM part for Whirlpool refrigerators. This part powers the auger that moves ice from the bin into the dispenser. This motor ensures that ice can be delivered smoothly and efficiently whenever needed.

Causes of a bad Ice Auger Gear Motor can include wear and tear from regular use, electrical issues that prevent the motor from receiving power, or mechanical problems that hinder the motor's ability to turn the auger. 

Symptoms of a bad Ice Auger Gear Motor include:

• The ice dispenser not working or dispensing ice very slowly.
• A humming or grinding noise coming from the ice dispenser mechanism.
• Ice not being dispensed at all, despite there being ice in the bin.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Icemaker Drive Shaft Sleeve is an OEM replacement part for Whirlpool refrigerators. This sleeve fits over the drive shaft that powers the icemaker. It works to smoothly transmit torque from the motor to ensure proper ice production.

Symptoms of a bad drive shaft sleeve icemaker include:

• Incomplete or inconsistent ice production  
• Jammed or frozen icemaker 
• Ice cubes not fully formed
• Ice falling out of cube trays improperly

Causes of a bad drive shaft sleeve icemaker can include cracks, splits, or damage due to repeated use over time. Failure of this part can lead to icemaker malfunction.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This condenser fan motor spins the fan that moves air across the condenser coils and around the compressor. Replacing a weak or seized motor restores proper heat removal so the cooling system can maintain stable temperatures and run efficiently.

• Drives the condenser fan to move airflow through the condenser section
• Helps dissipate heat from the refrigeration system and cool the compressor
• Failure may present as the condenser fan not running
• May also cause warm temperatures, longer run times, or loud scraping/whirring noises near the rear or bottom of the unit
• Can contribute to the compressor running hot

• Disconnect power before servicing; use gloves to protect from sharp edges
• Access the condenser area; install the new motor in the same orientation as the original
• Transfer the existing fan blade, bracket, and grommets if required; keep wiring clear of the blade
• Restore power and verify fan operation with the system running

The Fan is an OEM component specifically designed for select Bosch built-in ovens. As a critical convection element, it circulates internal air currents for optimal heat distribution throughout baking and broiling cycles.

Powerful yet precisely balanced centrifugal motion agitates spacious oven cavities with homogeneous warmth. Aerodynamic fan blades expedite even cooking without hot or cold spots. 

Causes requiring replacement relate to bearing seizure or broken blade attachments disrupting designed circulation. Prolonged heat exposure may cause premature motor failure or cracked housings to no longer sustain needed speeds.

Symptoms signaling the need for a new fan include:

• Inability to effectively circulate air for simultaneous multi-rack cooking  
• Louder than average operation noise accompanied by vibration
• Erratic or ineffective temperature management within cycles

This OEM Bosch replacement fan is also compatible with Thermador, Gaggenau, and some Kenmore built-in ovens employing convection methods. Proper reinstallation restores designed air transfer capabilities for perfect results.
 

The Circulation Pump Assembly is an OEM component specifically designed for Bosch dishwashers. It is responsible for circulating water during the wash cycle and helping dishes get properly cleaned. 

Causes of a bad circulation pump assembly can include normal wear and tear, as well as damage from debris getting caught in the pump mechanism over time. 

Symptoms of a bad circulation pump assembly include:

• Inability to circulate water, resulting in poor wash performance  
• Loud noises or vibrations coming from the pump area
• Leaks around or below the pump housing

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers. Replace yours today to restore optimal water circulation for thorough yet gentle cleaning.
 

This evaporator fan motor circulates cold air across the evaporator and throughout the compartments for even cooling. Replacing a worn motor restores proper airflow, temperature consistency, and overall defrost performance.

• Circulates air over the evaporator coils and through the vents to cool both compartments
• Helps maintain stable temperatures and supports effective defrost
• Failure symptoms include weak/no airflow, warming in one or both sections, frost buildup on the evaporator cover, or loud/intermittent fan noise
• Motor may start or may run intermittently, causing long run times

• Disconnect power before servicing; internal panels and fan blades can be sharp
• Access the motor behind the freezer's rear panel; remove shelves/ice maker as needed
• Transfer the original fan blade and any mounts/grommets to the new motor; match blade orientation
• Route wiring as original, secure the motor, and ensure the fan spins freely before reassembly

Rear pump housing for the washer drain/pump assembly. Replaces the worn rear housing that supports the impeller and bearing, helping restore proper draining and reduce leaks or unusual pump noises when the housing fails. What it does:

• Houses and supports the pump impeller and bearing, forming the rear half of the drain pump assembly.
• Restores a sealed mounting surface to help prevent water leaks from the pump area.
• Helps re-establish correct water flow and draining when a cracked or worn housing impairs the pump.
• Addresses symptoms such as poor or no draining, water at the base of the appliance, or loud/grinding pump noises.

• Disconnect power and shut off water supply before starting; drain any standing water to avoid spills.
• Remove the washer access panels and pump assembly; transfer the impeller, seals, and any hardware as required.
• Inspect and replace pump gaskets/seals and the impeller if worn; tighten mounting fasteners to OEM torque where specified.

This OEM replacement part is a motor assembly for ovens. The motor assembly is the main motor that powers the oven fan which is responsible for maintaining and adjusting the temperature in an oven. If the oven is no longer heating properly, turning on, or maintaining temperature, then the motor assembly will need to be replaced.To replace this part, make sure that the oven is unplugged. After it has been powered off, proceed to pull the oven out and away from the wall. Once moved, uninstall the back panel of the oven by removing the panel's mounting screws. After detaching the back panel, locate the motor housing on the back of the oven. Unthread the screws that hold the housing in place. Once removed, locate the mounting brackets that hold the motor in place and remove the screws that attach to the motor. Pull the old motor out of its place and install the new motor. Reinstall the back panel and restore power to the appliance.This genuine replacement part is sold individually and is compatible with Bosch, Gaggenau, and Thermador brand ovens.

This replacement fan restores proper airflow inside your appliance, circulating air for cooling and overall performance. Replacing a worn or damaged fan helps keep temperatures in check and reduces noise from rubbing or imbalanced blades.

• Circulates air as designed to cool components and move heat/moisture where intended
• Common symptoms of a failing fan include loud scraping or rattling, weak or no airflow, wobble, or the fan not turning
• Heat buildup around the control area or repeated thermal shutdowns can point to a fan issue
• Physical cracks, broken fins, or warping indicate the fan should be replaced

• Disconnect power at the breaker; allow the unit to cool completely
• Access the fan per your model; remove panels/guards carefully and note orientation
• Transfer any retaining nut/clip or gasket from the original as required; seat the fan fully and secure
• Spin by hand to verify free movement; ensure no contact with shrouds before restoring power