Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Seals the gap between tub and door to prevent water leaks. Replace if torn, frayed, or compressed. Confirm fit with your dishwasher model number.
The dishwasher is 4 years old, so I figured since it was leaking from the bottom, replacing the Tub Gasket PN: AP5690109, Splash Shield Kit PN: AP4338941 , and the bottom Door Seal/Gasket PN: AP5809675 was a good idea; the machine probably has around 1200 cycles in 4 years. There's no telling how much the door had opened and closed!? The bottom Door Seal/Gasket was badly worn, and the entire job took me around 30 minutes which included the detailed cleaning of the mating flanges. Take your... Read more
Seals the gap between the dishwasher tub and door bottom to prevent water leaks. Replace if you notice leaking at the door base or visible wear.
Replaces a cracked, broken, or damaged lower spray arm in your dishwasher. Snaps into the bottom sump assembly. Essential for proper water distribution.
Ordered replacement part. came within 6 days , it fit perfectly, and was easily installed. the right fix at a great price, very happy with results Read more
Mounting bracket that secures the lower spray arm to the dishwasher sump. Replace if cracked, broken, or missing to prevent spray arm detachment or tilting.
The fix took 30 seconds. The key to success was your video that explained how reinstalled parts "lock in". Read more
Prevents water from leaking at door corners in your dishwasher. Replace if you notice pooling water on the floor during cycles. Easy DIY install.
Fixes dishwasher not filling, slow filling, or continuous water flow. Controls water entering the tub. Quick 15-30 minute DIY replacement with basic tools.
Obtained part online from Appliance Parts Pros. com... within one or two days received the part... Replacing the defective part is straight forward... The valve is located on the left underside of the unit. Make sure the electrical power is off and the water supply to the unit is closed off. Disconnect the water inlet piping from the valve... in my case separating a 1/2 inch copper union. Remove the electrical quick connector from the solenoid prongs. The red wire is orientated at the top of... Read more
The Drain Pump Assembly is an OEM part for Frigidaire dishwashers. It plays a critical role in the dishwasher's operation by removing the used water at the end of each wash cycle, ensuring the machine is ready for the next load. This assembly includes the pump that powers the expulsion of water, along with any necessary housing and fittings to connect it securely to the dishwasher's system.
Causes of a bad part can vary from clogs formed by food particles or other debris, to mechanical failure of the pump motor itself.
Symptoms of a bad Drain Pump Assembly include:
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
After inspecting screen and drain hose with no obvious cause, replaced drain pump. Removal of the pump was very straight forward. 3 screws, 2 electric connections, and 1 hose clamp was all that was needed. Read more
The Lower Rack Assembly is an OEM part for Frigidaire dishwashers. This rack is designed to hold dishes, cups, glasses and other utensils securely in place on the lower level during the washing cycle.
Causes of a bad lower rack can include warping or bending of wire prongs over time due to heavy loads, corrosion from constant moisture exposure, breakage of plastic parts, or shearing off of roller components. Heavy pots and pans can put significant strain on the rack.
Symptoms of a bad lower rack assembly include:
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
I very seldom respond to requests for feedback like this but definitely feel moved to do so in this case. When our 8 year old dishwasher started acting up my initial reaction was to simply replace it. I wasn't sure what was wrong, nor if I would be able to find the right part once I did figure out the problem. The troubleshooting advice on this website was spot on and I quickly figured out what needed to be replaced. The repair videos were easy to follow and the parts were here two days... Read more
The Circulation Pump Motor Kit is an OEM replacement part for Frigidaire dishwashers. This essential kit contains the circulation pump motor, which is responsible for circulating and distributing the water and detergent solution throughout the dishwasher tub during the wash cycle.
Causes of needing to replace the circulation pump motor kit in a dishwasher can include normal wear and tear over time, electrical malfunctions, or physical damage to the pump motor or impeller components due to debris or foreign objects.
Symptoms of a faulty circulation pump motor kit include:
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models.
Replaced the pump motor. Works great again. I saw the picture of the part on the website so I knew I was getting the right part and watched the video to see if there were any shortcuts. Easy job. Read more
The Heating Element is an OEM part for Frigidaire dishwashers. It heats water to the right temperature for washing dishes and aids in drying by promoting evaporation. Situated at the dishwasher's bottom, this element is vital for excellent cleaning and dry dishes.
Over time, the Heating Element may fail due to reasons like mineral buildup from hard water, corrosion, or electrical problems. A faulty heating element can cause issues, impacting the dishwasher's cleaning and drying performance.
Symptoms of a bad Heating Element include:
My very handy husband replaced the part and now I have a working dishwasher again. Thank goodness we were able to find the part-otherwise we would have been out of pocket for a lot more cash! Read more
Replace a damaged or wobbly top rack with this upper rack assembly to restore smooth glide and secure loading on the dishwasher's upper level, helping cups and bowls stay in place and wash correctly.
Watched video when I ordered product and it was easy. Buy the way, your product is the most reasonably priced online ! WILL use you again. Saved you in my computer under favorites. Read more
Replace broken, cracked, or missing lower dishrack wheel assemblies. Snaps onto rack to allow smooth gliding in and out of dishwasher. Easy install.
I went to appliancepartspros.com and searched "dishwasher rack rollers" and found mine immediately using only the make of the machine. It took me another 5 minutes to order the parts and check out. I received the parts in two days using the most economical shipping method. It took less than ten minutes to make my dishwasher as good as new! A very simple job made more simple by using appliancepartspro.com. Read more
Replacement silverware basket for dishwashers. Holds flatware during wash cycles. Order if your basket is cracked, broken, has holes, or is missing.
Replaced racks, Read more
Soap dispenser won't open or release detergent during wash cycle? This detergent dispenser assembly fixes dispensing issues. 10-minute DIY repair.
My husband expected we needed a new dishwasher but I insisted on trying to fix it first. You need a Torx screwdriver so make sure you have a set. A little difficult to get cover back on and lined up by myself, but I managed and this was my first attempt at major appliance repair. I replaced the entire console and the dispenser. Still working after 3 loads so my husband may have to eventually admit that I fixed it. Read more
Flexible drain hose channels waste water from your dishwasher to the drain system. Replace if cracked, leaking, or damaged to prevent water backup issues.
The Dishwasher Control Board is an OEM part for Frigidaire dishwashers. It operates as the central "brain" of the dishwasher, controlling functions like cycle selections, wash and rinse levels, heating elements, and input/output sensors.
Causes can be circuitry failures, moisture damage over time, or physical stresses from vibration.
Symptoms of a bad control board include:
I went to appliancepartspro.com and found out that the problem could be the main circuit board. I went on and ordered the part, knowing it could be returned if necessary, but it was like music to my ears when I installed the part, myself, and turned the power back on. Easy. Thanks appliancepartspro. Read more