Need Help?
Call or text
Replacement door closure spring for refrigerators and freezers. Installs in top door mechanism to provide tension for self-closing action. Gold finish.
Downloaded the Technical Service Guide and followed the instructions for removal of the Door Closure Mechanism. Items the instructions failed to mention: 1. Although they took the trouble to call for removal of a 3/16" Allen head bolt, they referred to the closure mounting bolts as just "bolts". In fact, they were T-25 bolts. If I didn't have a Torx kit, it would have required a trip to the Orange Big Box Home Center to complete the job. 2. Although the instructions don't describe this step,... Read more
Wire clamp spring that secures the door boot to the washer's front panel opening. Replace if broken, stretched, or missing to keep the seal properly seated.
Fixing was easy and took approximately 1 hour. I have a Bosch Axxis washing machine and all parts came exactly as ordered and within 2 days of order. I had to take off front and top panel and the door switch. The new wire and spring was part of the order and I had to pay for it. The old parts looked fine to me and I could have reused them but since I had the new ones, I replaced them anyhow. I wish I would have the option to buy the rubber gasket only. Read more
Replacement spring for refrigerator ice dispenser chute door. Restores closing tension when original is fatigued, broken, or missing. Installs on strike arm.
We ordered the Ice Door Fountain Kit and ice door spring, which was delivered to our home within three or four days. I understood everything about how to change it except the placement of the spring. A video on your website showed exactly how to put the spring in place and helped me get the job done quickly. It solved our problem and we really appreciate your services. Read more
Replaces broken or missing spring on French door refrigerator left door flapper assembly. Ensures flapper retracts properly when door closes for tight seal.
Removed refrigerator panel, disconnected light and fan power. Removed fan assembly and replaced motor, grommets and fan attachment spring. Unit had adhesive on spring to help hold the spring. Chatted with customer service and clarified that spring and fan would easily pull off motor shaft. Adhesive probably was extra measure used during original build of the fridge. Noise was due to fan rubbing on housing. New fan position set to avoid any rubbing. Read more
Replaces a broken, weakened, or missing dishwasher door spring. Installs on the side panel to provide tension for smooth, balanced door operation.
I ordered a pair of springs from AppliancePartsPros.com. When the new springs arrived, I unscrewed the frame from the counter top, slid the dishwasher out part of the way and installed the new springs and saved myself at least one-hundred dollars. Read more
Replacement suspension spring for washer tub assemblies. Installs to dampen vibrations and absorb movement. Order if your spring is broken, worn, or missing.
Distortion spring that applies tension within the dryer mechanism. Replace if fatigued, broken, or missing to restore proper tension and assembly function.
Replacement spring for stand mixer beater shaft assembly. Secures to lift rod with nut and washer. Install if original spring is missing, broken, or lost.
Replaced the part. Read more
Supports and stabilizes the washer tub during operation. Replace if spring is broken, stretched, or weak to restore proper tub balance and prevent damage.
Got a small piece of sheet metal for Home Depot, Cut it to fit, and drilled holes to fit. Replaced spring and plastic holder, and put it back together. Spring was a little tricky to put on, because of the spring strength, but I got it. Read more
Suspension damper shock absorber for front-load washers. Replaces cracked, weak, or broken shocks causing excessive vibration and off-balance loads.
I researched the problem and found that normal wear and tear will cause the Damper shocks and the Suspension spring to fail. I decided to replace all Damper Shocks and the suspension Springs since I had the washer apart already. The Suspension Spring requires a lot of pull to get it in place correctly. I made a hook tool (from political yard sign frame) to hook the old spring to remove and pull the new spring up. It helps to have a second person use leverage (use a short 2x2 board) under the... Read more
Replace a broken or fatigued oven door spring to restore proper counterbalance. Installs behind side panel. Ensures door closes firmly and seals correctly.
It was a simple fix. I removed the six screws holding the side panel on the range. Removed the broken parks of the spring. I use a screwdriver to help stretch the new spring into place. I then replaced the side panel and screwed it on. About ten minutes work. Read more
Replacement spring for microwave door latch mechanism. Restores return tension so the latch engages and releases correctly. Needed when spring is broken or worn.
With parts from you my son repaired the door and now microwave is operating perfect.,.... A 10 minute job for him!... Thanks for not having to buy a new one!!!!! Read more
Replaces a broken, stretched, or fatigued dishwasher door spring that counterbalances the door weight. Restores controlled opening and closing.
Replaced the door spring. The spring was a perfect fit. Read more
Restores closing tension for refrigerator ice dispenser recess door. Replace if spring is weak, broken, or missing to keep door closing properly.
I used the video posted on site...note on my model trim bezel did not have to be removed! Read more
Counterbalances the dishwasher door for smooth opening and closing. Replace if your spring is broken, fatigued, or missing to restore proper door operation.
This is an easy home-owner repair! 1. Get down on the floor with a flashlight and a 5/16 nut driver, and remove the two screws holding the lower panel. Those screws are located beneath the lower panel, so you'll have your head on the floor to see 'em! 2. Lift the lower panel up and out. 3. Using the nut driver, remove the two kick-plate screws and lay the kick-plate aside. 4. Discard the broken spring. 5, Look at the remaining spring to determine where the spring should hook. 6. Hook... Read more
Replacement suspension spring for washer tub support systems. Restores proper tension when original spring is weakened, broken, or causing tub tilt.
Watched a few of your videos and ordered the springs and a insert, and actually got the parts right. I am not a Appliance repair guy but I am retired and I am pretty handy so I thought what the heck. I watched the videos, a lot of common sense, common tools, and plenty of time. My knuckles are busted up and a little blood, but I got it done. Was actually kind of rewarding. Works like a champ. The Videos, ARE AWESOME. Read more