Parts for Lg WT7700HVA: Top Cover Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This rear panel replaces the outer back cabinet on compatible LG appliances, restoring a secure enclosure and protecting internal components from damage and debris. It provides a clean finished appearance to the appliance exterior. What it does:

• Covers and protects electronics, wiring, and internal parts at the back of the appliance
• Serves as a mounting surface for screws and brackets that secure rear components
• Prevents debris and pests from entering the appliance
• Replaces a dented, cracked, or missing back panel that can cause rattling or gaps

• Disconnect power before starting any repair to reduce risk of shock
• Remove screws or fasteners securing the existing rear panel; keep hardware for reinstallation if reusable
• Handle edges carefully—sheet metal edges can be sharp

This lid assembly replaces the top cover that seals and secures the washer tub, restoring safe closing and containment during wash cycles. It provides the structural top surface and hinge mounting for normal operation. What it does:

• Covers the washer drum to help keep water, suds, and clothes contained during cycles
• Provides the mounting surface for the lid hinge and related hardware so the lid opens and closes properly
• Restores a solid, stable top surface to reduce noise and movement from the top of the washer
• Helps ensure the lid closes evenly to allow the washer's safety interlocks to engage

• Disconnect power before starting any repair to avoid electric shock
• Support the lid during removal/installation to prevent damage or pinched fingers
• Installation may require removing trim or hinge screws and aligning the lid for proper closing; keep fasteners organized
• Inspect those components and replace separately if needed

A replacement front panel assembly that restores the washer/dryer/microwave control area's appearance and provides a secure mounting surface for the control board and buttons. Replaces cracked, faded, or damaged front panels for reliable operation. What it does:

• Protects the control board and user controls from spills, dust, and impact
• Provides the button/display opening and mounting points for switches and touch controls
• Restores cosmetic appearance when the original panel is cracked, warped, or discolored
• Can resolve symptoms like loose or non-functioning buttons, visible damage, or missing trim

• Disconnect power (unplug appliance or switch off breaker) before starting
• Handle edges and any glass/trim pieces carefully to avoid breakage
• Reinstall screws and connectors securely; for model-specific steps

This knob assembly replaces a damaged or missing control knob so you can securely and accurately set cooktop or oven controls. Durable replacement restores tactile grip and proper engagement with the control shaft. What it does:

• Replaces a cracked, melted, stripped, or loose control knob that won't turn or stay in position
• Provides correct spline engagement for consistent selection of heat or function settings
• Restores safe, predictable control response when adjusting temperature or burner level
• Helps prevent accidental slips or improper control input from worn knob surfaces

• One knob assembly

• Disconnect power to the appliance before servicing; for gas ranges also shut off the gas supply
• Pull the old knob straight off the control shaft; align splines and push the new knob fully onto the shaft
• If knob resists, verify correct orientation—do not force or hammer the part into place
• If the control shaft or switch is damaged, replace the underlying control/switch assembly rather than relying on the knob

This part is a genuine OEM control board and clock that has been manufactured by LG for use with washing machines. This control board ensures that the functions of the washing machine, such as the spinning and draining cycles, are controllable and monitored. If this part fails in any way, the cycles may not work properly, if at all. Thus, this part should be immediately replaced. Unplug the washing machine from the outlet and disconnect it from the water source before starting any work. Gloves are recommended to prevent injury to the hands. This part is sold individually and is manufactured from high quality, durable, non-corrosive materials to ensure the best possible quality. It is compatible with washers from LG.

Replacement display power control board assembly that restores the appliance's front-panel display and display-power functions. Installs in place of a failed display module to return visible status and responsive panel controls. What it does:

• Provides power and signal control for the front-panel display and touch/press controls
• Replaces a board that causes a blank or dim display
• Fixes intermittent or unresponsive control buttons and erratic display behavior
• Resolves display-related error codes or loss of visual feedback

• Always disconnect the appliance from power before starting any repair.
• Handle the board by its edges and use proper electrostatic discharge (ESD) precautions.
• Photograph wiring and connector locations before disconnecting to ensure correct reassembly.

The Lid Switch and Lock Assembly is an OEM component specifically designed for LG washing machines. It contains both the switch that detects when the lid is closed, as well as the metal lock mechanisms that securely engage the lid during active cycles. This switch contains a 47-inch wire harness with 6-pin plugs.

Symptoms of a bad lid switch and lock assembly include:

• The washer not starting or agitating with the lid open
• Inability to fully close or lock the washer lid
• Error codes related to sensed lid position issues

Causes of failure involve wear of lock moving parts combined with mechanical and electrical degradation over thousands of uses. Continuous hinge motions and detergent/cleaner exposure take their toll.

This Lid switch is also compatible with Kenmore units reliant on LG parts.

A metal bracket assembly that provides secure mounting and alignment for appliance components, restoring proper fit and reducing movement. Use this bracket to replace damaged or bent mounts that cause loose panels or misaligned parts. What it does

• Secures and supports appliance components to the cabinet or frame.
• Restores proper alignment to panels, doors, or assemblies.
• Reduces vibration and rattle caused by broken or warped mounts.
• Prevents further wear by re-establishing a stable mounting point.

• Disconnect power (and water, before beginning any repair.
• Handle sharp edges and wear gloves to protect your hands.
• Compare the replacement to the original for correct orientation before fastening.
• Use appropriate-size fasteners and avoid over-tightening to prevent damage.

This detergent box assembly replaces the washer's front detergent/dispenser drawer so detergents and additives dispense cleanly during cycles. It restores proper product delivery and helps reduce residue build-up in the dispenser area. What it does:

• Houses and channels liquid and powdered detergents and additives into the wash at the correct time
• Prevents detergent from pooling or leaking into the washer cabinet when functioning correctly
• Reduces visible residue and clogging in the dispenser area that can affect dispensing
• Compatible with front-load washer detergent/dispenser systems that use a removable drawer

• One detergent box assembly

• Remove power and water supply before beginning service
• Typically installs by sliding into the dispenser housing and securing any retaining clips or screws
• Inspect surrounding seals and rails for damage and clean any residue before installing the new assembly

The Softener Cap is an OEM part for LG washing machines. It serves as the lid and housing for the internal water softener that prevents mineral deposits from building up. The softener cap funnels water to and from the softener compartment during various stages of the wash cycle.

Causes of a faulty softener cap can include cracked or degraded seals over extended usage, impact damage distorting fit, or harsh cleaners affecting plastics over time.

Symptoms of a bad softener cap include:

• Water leaks from around the softener area  
• The cap not closing or sealing properly 
• Mineral buildup occurring prematurely
• The softener not functioning as intended

This genuine LG replacement is compatible with Sears/Kenmore machines.

This softener dispenser cap replaces the worn or cracked cap that covers the fabric softener chamber, restoring proper containment and controlled release of liquid softener during the wash cycle. A simple, low-cost part that prevents leaks and keeps the dispenser functioning. What it does

• Covers and seals the fabric softener compartment so liquid stays in the dispenser until the rinse cycle.
• Helps prevent softener from leaking into the washer drum between cycles.
• Restores a secure fit when the original cap is cracked, warped, or missing.
• Resolves issues with softener dispensing at the wrong time or pooling in the dispenser.

• One softener dispenser cap (1 piece)

• Disconnect power to the washer before accessing internal parts and follow all safety precautions.
• Typically accessed by removing the dispenser drawer or top panel—refer to your washer's service instructions.
• Inspect surrounding dispenser components for damage and replace any worn parts to ensure a proper seal.
• No electrical connections; basic hand tools may be required.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This replacement nozzle assembly restores proper flow and distribution within the appliance's system to maintain cleaning performance. Replace a cracked, clogged, or worn nozzle to help prevent performance loss and keep the unit operating efficiently.

• Directs and concentrates flow through the appliance for effective operation
• Helps maintain a sealed path to avoid leaks or loss of performance
• Damage or obstructions can cause reduced cleaning results, unusual noise, or visible leaks/air leaks
• Visible cracks, warping, or a loose connection indicate the nozzle should be replaced

• Disconnect power (and water supply if applicable) before servicing
• Remove the old nozzle per your model's service information; clear any debris from the mating areas
• Inspect related seals/gaskets and replace if worn to ensure a proper seal
• Install the new nozzle securely and test for proper operation and leaks/airflow

A friction-style damper assembly that controls and cushions door movement for a smooth, controlled close and hold. Replaces a worn or damaged damper to restore proper door damping and reduce abrupt motion. What it does

• Cushions and slows door movement so doors close smoothly and stay in position
• Reduces slamming and helps prevent stress on hinges and cabinet seals
• Common symptom: door drifts, won't stay open or closed, or moves unevenly
• Common symptom: grinding, binding, or increased noise at the hinge area

• One damper assembly

• Disconnect power to the appliance before beginning any repair
• Access may require removing a hinge cover or door trim; keep fasteners organized
• Handle plastic components gently to avoid breakage; align and test door travel after install

This friction damper assembly controls the refrigerator damper door to steady airflow between compartments, helping reduce temperature swings and stop the damper from moving freely. Replace a worn damper to restore controlled airflow and quieter operation. What it does:

• Provides friction to hold the damper door open or closed for consistent airflow.
• Helps regulate air exchange between compartments to support steady temperatures.
• A failing damper can stick, stay open, or make clicking/scraping noises and contribute to uneven cooling.
• Restores proper damper movement and reduces noise when functioning correctly.

• Disconnect power to the appliance before beginning any service.
• Access typically requires removing the interior damper cover or panel; keep track of screws and fasteners.
• Align and seat the assembly per OEM guidance; do not force parts into place.

The Water Inlet Valve is an OEM replacement part specific to LG washing machines. It is an electronic solenoid valve located near the water supply inlet ports that controls the flow of water into the washer tub. The inlet valve precisely regulates water levels during different phases like filling, washing, rinsing, and spinning cycles.

Causes of a bad water inlet valve can include worn or faulty electronic components, mineral buildup obstructing valve movement, or damage to seals and diaphragms.

Symptoms of a bad water inlet valve include:

• Inability to properly fill the washer tub during cycles
• Water leaking or flooding from the valve area
• Erratic water temperature or varying fill levels between loads
• Cycles failing to advance due to inadequate or unregulated water flow

This OEM LG part is also compatible with Sears/Kenmore models.

The Hose Connector is an OEM part for LG washing machines. It controls the water flow during the wash and rinse cycles. This part is designed to facilitate a secure and leak-proof connection between different sections of the washing machine, such as the inlet valve and the tub, or the pump and the drain hose. Ensuring these connections are secure is vital for the efficient operation of the washing machine, preventing leaks and maintaining optimal water usage.

Causes of failure may involve cracks, splitting, or collapsed seals/gaskets, as well as excessive mineral or foreign deposits that can obstruct water flow.

Symptoms of a bad hose connector are:

• Slow or incomplete filling during wash cycles
• Water leaks at the supply valve or connector area
• Connector split, cracked or compromised fittings

This genuine LG replacement is also compatible with Kenmore washing machines.

This inlet hose channels household water into the appliance during the fill cycle. Replacing a cracked, brittle, or leaking hose restores a secure, leak-resistant path that helps prevent puddles and fill-related interruptions. What it does:

• Routes incoming water from the inlet valve into the appliance's internal water path
• Helps maintain a watertight connection when properly secured with clamps
• Typical failure signs: dripping or puddling under the unit, visible cracks/kinks/bulges, or lingering dampness
• A restricted or leaking hose can contribute to long fill times or incomplete cycles

• 1 inlet hose

• Disconnect power and turn off the water supply before servicing
• Place towels or a shallow pan to catch residual water
• Note the original routing and clamp locations; install the new hose the same way without twists or kinks
• Fully seat hose ends and secure clamps; restore water and run a brief fill to check for leaks

Detergent housing assembly that holds and routes detergent to the washer dispenser, helping ensure proper detergent flow and reducing leaks or dispenser jams. Fits into the dispenser area to replace cracked, warped, or damaged housing components. What it does:

• Houses and channels liquid or powdered detergent into the dispenser and wash chamber
• Restores proper detergent release when the original housing is cracked, broken, or warped
• Helps stop leaks and detergent buildup around the dispenser area
• Works with the dispenser drawer and related seals to maintain correct flow

• Disconnect power and turn off the water supply before starting service
• Use basic hand tools and follow the washer service manual or OEM diagram for disassembly/reassembly
• Inspect and replace any worn seals or gaskets at reassembly to prevent leaks

The Water Level Pressure Switch is an OEM replacement part for LG washing machines. It is an essential component that monitors and detects the water level within the washing machine tub during the wash cycle.

Symptoms of a bad water level pressure switch:

• Washing machine not filling with water or not stopping when the desired water level is reached
• Excessive water intake, leading to overfilling and potential leaks
• Error codes or indicators related to water level issues
• Washing machine not advancing to the next cycle due to incorrect water level detection

Causes of a bad water level pressure switch can include mechanical failure, electrical malfunctions, or blockages or debris preventing accurate water level readings.

This OEM LG part is also compatible with Sears/Kenmore washing machine models.

This filter assembly is the refrigerator water filter housing that holds and secures the replaceable water filter cartridge, helping deliver clean-tasting water and proper flow to the dispenser and icemaker. Designed to match OEM fit and function. What it does:

• Houses the water filter cartridge so water is processed before reaching the dispenser and icemaker
• Restores proper water flow when a damaged or cracked housing restricts supply
• Helps prevent contaminants and odors from passing through the system when used with the correct filter cartridge
• Supports reliable sealing to reduce risk of leaks at the filter connection

• One filter assembly housing

• Turn off refrigerator water supply and dispense any remaining water before beginning work
• Replace only with the correct OEM housing and compatible filter cartridge for this unit
• Inspect O-rings/seals and replace if worn to ensure a watertight fit

This dispenser assembly is the washer's detergent drawer housing. It channels incoming water through the detergent and fabric softener compartments (and prewash, if equipped) so additives are dispensed at the correct time and helps prevent leaks at the dispenser area.

• Directs water through the dispenser to flush detergent/softener into the tub at the proper points in the cycle
• Replaces cracked, warped, or clogged housings that leak or misdirect water
• Helps resolve detergent or softener remaining in the drawer after a cycle
• Addresses water leaking or overflowing from the dispenser area or visible damage/mineral buildup in the dispenser box

• Unplug the washer and shut off water supplies before servicing
• Pull out the drawer, remove the top cover as needed, then remove mounting screws and release hose clamps to detach the old assembly
• Move hoses/clamps to the new assembly and ensure gaskets/siphon caps are properly seated
• Run a quick fill/rinse to check for leaks before final reassembly

The Clamp is an OEM part for LG washing machines. It is used to secure the hose connections within the washer, ensuring that water flows correctly without leaks.

Over time, the clamp can become worn or damaged due to repeated exposure to water, vibration, or general wear and tear. If the clamp fails, it can lead to water leaks or hoses becoming detached.

Symptoms of a bad clamp include:

• Water leaking from hose connections
• Hoses coming loose or detaching during operation
• Visible rust or damage on the clamp
• Poor water flow or pressure issues

This OEM LG part is also compatible with Sears/Kenmore models.

This small cover cap conceals an exposed fastener or opening on your appliance, restoring a clean, finished look. It also helps protect the area from dust and splashes for a tidy, long-lasting installation.

• Covers and protects an open screw hole or attachment point on a panel or door
• Restores a clean, factory appearance
• Helps keep dust and moisture out of the opening
• Common signs it's needed: missing cap, cracked/broken cap, loose cap, won't stay clipped

• Disconnect power (and water, if applicable) before servicing exterior panels or doors
• Note the cap's orientation and any retaining tabs before removal
• Use a plastic pry tool to gently release the old cap; press the new cap until fully seated
• Avoid forcing the cap or overtightening any underlying fastener to prevent damage

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.