Parts for Lg WM4200HWA/00: Cabinet & Control Panel Assy Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Drain Pump Assembly is an OEM part for LG washing machines. It is responsible for pumping water out of the washing machine tub at the end of each cycle.

Causes of a bad drain pump can include motor failure, blockages in the pump's internals, cracks or fractures in the plastic body, or damaged impeller.

Symptoms of a bad Drain Pump include:

• Water not fully draining out after cycles
• Pump making strange noises when attempting to drain
• Standing water or flooding inside the washing machine

This OEM LG part is also compatible with some Kenmore models.

The Shipping Bolt Assembly is an OEM part for LG washing machines. It is essential for securing the drum during transport, preventing movement that could damage internal components.

Causes of a bad shipping bolt assembly can include improper removal or reinstallation, damage from handling, or deterioration if left in place during machine operation. When compromised, it can affect the stability and alignment of the drum.

Symptoms of a bad shipping bolt assembly include:

• Excessive vibration or noise during washing cycles
• Difficulty in moving or transporting the washing machine
• Drum misalignment issues
• Unusual movement or shifting of the machine during operation

This OEM LG part is also compatible with Sears/Kenmore models.

The Shipping Bolt is an OEM part for LG washing machines, designed to secure the washing machine's drum during transportation. These bolts are important for preventing damage to the drum and suspension system by immobilizing the drum, thereby avoiding any excessive movement or vibrations that could occur while moving the appliance. 

Causes of a bad shipping bolt can include improper removal during installation, damage from handling, or degradation over time if it was left in place during operation. A damaged or missing shipping bolt can lead to issues with the washing machine's drum alignment and overall stability.

Symptoms that indicate the shipping bolts need removal or installation include:

• Excessive noise or vibrations during operation, suggesting the bolts were not removed after installation.
• Damage to the washing machine's drum or suspension system after moving the appliance without the bolts properly installed.

This OEM LG part can also be used on Kenmore/Sears appliances. 

Secures the washer’s tub and basket during moving to prevent internal damage. If the originals are missing after a move, install replacements for transport and remove them before using the washer.

What it does

• Locks the tub and basket to limit movement in transit
• Helps prevent suspension damage and internal rattles while relocating
• Replaces missing, bent, or stripped transport bolts
• Useful for moves, storage, or service shipments

What’s included
One shipping bolt assembly (sold individually).

Install notes

• Unplug power and turn off water before service
• Insert through the rear panel into the designated mounting point; tighten snugly—don’t overtighten
• Do not operate the washer with shipping bolts installed; remove all bolts after placement
• Some models use multiple bolts and lengths—match count/positions to your owner’s manual

Usage tip
After removal, bag and tape the bolts to the cabinet so they’re on hand for the next move.

The Display PCB Assembly is an OEM part for LG washers. Housed within the digital control panel, this printed circuit board coordinates the interface between users and the washer. Integrated microchips and programs process commands to start cycles and display settings.

Causes of a bad display PCB can include liquid intrusion into circuit paths, power surges, or natural component deterioration over time. Without a functioning control interface, users cannot operate basic functions or monitor wash status. 

Symptoms of a bad display PCB include:

• Unresponsive or blank control panel display  
• Erratic or failed control functions
• Water damage or physical damage visible on PCB

This LG OEM replacement ensures dependable performance for control programming years to come. Compatible also with Sears/Kenmore models for a direct fit and restoration of essential washing controls.

This door hinge bracket mounts the hinge to the washer's front cabinet, keeping the door aligned so it closes and seals properly. A bent or broken bracket can lead to door sagging, poor latching, or leaks at the door.

• Secures the door hinge to the washer's front panel/cabinet
• Supports door weight to maintain alignment
• Helps preserve proper door-to-gasket contact for sealing
• Typical symptoms: door sags or rubs, won't close/latch, or water leaks at the door

• Disconnect power and shut off water before servicing.
• Support the door before removing hinge/bracket screws to prevent strain.
• Transfer the hinge to the new bracket and reinstall using existing hardware.
• Align the door and ensure latch engagement and gasket seal before fully tightening.

This multi-connector wire harness routes power and signals between control electronics and appliance components to restore reliable electrical connections. It replaces damaged or worn wiring to help stop intermittent operation and communication faults. What it does:

• Connects multiple control modules and components through factory-style multi-pin plugs
• Restores lost or intermittent power and signal paths caused by frayed wires or broken connectors
• Helps stop symptoms such as intermittent cycles, component non-response, or error codes tied to wiring faults
• Matches OEM connector layouts for proper fit and secure connections

• One multi-connector wire harness

• Designed for professional or experienced DIY installation; confirm connector orientation and routing before connecting
• Disconnect power to the appliance before service to avoid shock or damage
• Inspect mating connectors and terminals for corrosion or damage; replace if necessary
• Secure harness with existing clips or ties to prevent contact with moving or hot parts

The Motor Rotor Bolt is an OEM part for LG washing machines. It secures the rotor to the motor shaft, playing a crucial role in the efficient functioning of the motor and ensuring the washer drum spins correctly during wash cycles.

Causes of a bad motor rotor bolt can include wear and tear from prolonged use, corrosion due to exposure to moisture, or damage from over-tightening or accidental impacts. A faulty motor rotor bolt can compromise the stability of the motor, leading to various operational issues.

Symptoms of a bad motor rotor bolt include:

• The washer drum not spinning or spinning irregularly
• Unusual noises during operation, such as banging or clunking
• The washer failing to complete cycles or stopping mid-cycle
• Visible wear or damage to the bolt or surrounding components

This OEM LG part is also compatible with Sears/Kenmore models.

This cabinet cover is a direct-replacement outer panel that restores the appliance's finished look while protecting internal components from dust and debris. It helps keep the cabinet sealed and prevents exposure from a damaged or missing panel. What it does:

• Replaces a cracked, dented, or missing cabinet cover to restore appearance
• Shields internal parts and wiring from dust, spills, and foreign objects
• Reduces rattles and vibration caused by loose or damaged panels
• Helps preserve proper airflow pathways by keeping the cabinet closed

• Disconnect power to the appliance before starting any work.
• Handle edges carefully; metal panels can be sharp.
• Basic hand tools are typically required; keep screws and mounting hardware organized.

The Outer Door Boot Seal Clamp is an OEM part for LG washing machines. This clamp secures the outer door boot seal, ensuring a tight seal to prevent water leaks during the wash cycle.

You should replace the outer door boot seal clamp if it becomes damaged or loses its tension, which can happen due to regular use, exposure to harsh cleaning agents, or physical wear and tear.

Symptoms of a bad outer door boot seal clamp include:

• Water leaks from the door area during the wash cycle
• Loose or shifting door boot seal
• Difficulty in closing the washing machine door securely

This OEM LG part is also compatible with Sears/Kenmore.

This multi-connector wiring harness routes power and signals between the appliance control and multiple components to restore proper electrical connections. It replaces damaged or worn wiring to help the appliance operate reliably. What it does:

• Provides consolidated electrical connections for several circuits or components
• Restores power and signal paths when original wires or connectors are frayed, burnt, or broken
• Helps fix symptoms such as intermittent component operation, control unresponsiveness, or loss of power to subsystem(s)
• Maintains factory routing and connector fit for a clean, secure connection

• One multi-connector wiring harness

• Always disconnect power (unplug or switch off breaker) before servicing electrical components
• Match connector shapes and colors; install connectors fully until they click or seat securely
• Route harness away from sharp edges, moving parts, and heat sources; secure with existing clips or ties

The Motor Stator Bolt is an OEM part for LG washing machines. This bolt secures the stator to the motor, ensuring the stability and proper functioning of the washing machine's motor assembly.

Causes of a bad motor stator bolt can include wear and tear over time, improper installation, or damage from over-tightening or impact. A compromised bolt can lead to instability in the motor, potentially affecting the washer's performance.

Symptoms of a bad motor stator bolt include:

• Unusual noises during the wash cycle
• Vibrations or shaking of the washer
• The motor not functioning properly or failing to start

This OEM LG part is also compatible with Sears/Kenmore.

This single wire harness connects electrical components to restore power and signal routing for the appliance. It replaces a damaged or worn harness to help re-establish reliable electrical connections. What it does:

• Transfers power and signals between control boards, sensors, and actuators
• Helps resolve intermittent operation, failure to start, or component non-response when caused by wiring faults
• Replaces frayed, burned, or connector-damaged wiring to restore proper circuit continuity
• Matches OEM connector types and routing for a direct-fit replacement

• One single wire harness as shown

• Power off and unplug the appliance before beginning any repair
• Verify the harness routing and connector orientation match the original before securing
• Use appropriate tools and avoid pinching wires; replace any mounting clips that are damaged

This internal inlet hose directs incoming water into the appliance's fill system. Replacing a cracked or leaking hose restores proper water flow during cycles and helps prevent water damage around the unit. What it does:

• Routes water from the supply or inlet valve into the unit during fill
• Maintains a sealed path to help prevent drips and leaks when clamped correctly
• Common failure symptoms: water on the floor, slow or no fill, visible cracks/bulges/kinks, or dripping at hose connections
• Restores consistent water delivery to the dispenser, tub, or reservoir

• 1 inlet hose

• Disconnect power and shut off the water supply before servicing
• Place a towel or pan to catch residual water; relieve line pressure
• Note hose routing and transfer any reusable clamps/fittings from the original
• Secure all connections, restore water/power, and run a test cycle to check for leaks

The Inlet Valve Assembly is an OEM component specifically designed for LG front-load washers. Located near the water supply hose connection, the inlet valve controls the flow of water entering the washer tub.

Symptoms of a bad inlet valve assembly include:  

• Slow or incomplete fills during wash cycles  
• Water leaks when the washer is off or idle
• Fluctuations in water levels inside the tub
• The valve becomes difficult to turn on or off 

Causes of failure can be mineral buildup clogging internal ports, worn seals no longer tightly closing the passageway, or damaged electronics affecting valve operations.

The Inlet Valve Assembly is an OEM part for LG front-loading washing machines. It is a critical component that controls water flow into the washer tub. Comprised of durable solenoid valves and precision sealing elements, the inlet valve assembly works automatically to supply the appropriate amounts of hot and cold water at predetermined stages in each cycle. 

Causes of a bad inlet valve can include mineral buildup obstructing valve ports over time, worn valve seals resulting in water leaks, or electrical faults preventing the solenoids from opening and closing reliably.

Symptoms of a bad inlet valve assembly include:

• The washer failing to fill with water 
• Uneven or unbalanced water temperature
• Water leaks at the valve connections
• Error codes related to water level or temperature detection

This OEM LG part is also compatible with Sears/Kenmore front-load washers. 
 

The Float Assembly is an OEM part for LG washing machines. This part monitors and controls the water level within the appliance. It's a safety feature that prevents water overflow and potential flooding, contributing to the efficient operation of the washing machine by maintaining the correct water level for each cycle.

Causes of a bad Float Assembly can vary from simple blockages that prevent the float from moving freely to electrical faults within the switch mechanism. 

Symptoms of a bad Float Assembly include:

• Water overflowing from the washing machine
• Inadequate water levels that affect the washing cycle's effectiveness
• The washing machine failing to start the fill cycle due to a malfunctioning float switch

This OEM LG part is also compatible with some Kenmore models.

This base bracket mounts to the washer's lower frame to hold associated components securely in place. By keeping parts properly anchored, it helps maintain alignment and stability during operation to minimize vibration and noise.

• Attaches to the washer base and provides a mounting point for designated hardware
• Helps keep assemblies from shifting during agitation and spin
• Supports smooth, quieter operation by reducing vibration and rattling
• Common signs of failure include a bent or cracked bracket, loose/misaligned parts, or unusual noises from the base area

• Disconnect power and water supply before servicing; move the appliance for safe access
• Carefully tip or lay the washer back on protective padding; use a helper for stability
• Note the bracket's orientation and reuse existing mounting hardware as applicable
• Tighten fasteners securely and verify nearby parts have proper clearance before test run

The Knob Assembly is an OEM part for LG dryers. The assembly includes the knob used to operate cycles and settings on the dryer control panel. 

Symptoms of a bad knob assembly include:

• Knobs falling off or detaching from the control panel
• Difficulty selecting cycles or temperatures  
• Inability to activate or adjust timer settings
• Loose, wobbly, or improperly functioning knobs

Causes of a bad knob assembly can be general wear over time, excessive heat exposure damaging internal mechanisms, or accidental impact or damage.

Replace yours today with this genuine OEM LG knob assembly to restore full and reliable dryer operation. This replacement part is also compatible with Kenmore and some Samsung dryer models.

This softener cap seals and directs fabric softener within the washer dispenser to prevent leaks and ensure proper dispensing. Replacing a damaged cap restores correct softener flow and helps avoid dispenser drips or residue buildup. What it does

• Seals the fabric softener compartment to prevent leaks during fill and agitation
• Directs softener into the wash at the correct cycle, helping prevent early-release or pooling
• Reduces dispenser residue and clogs caused by cracked or warped caps
• Commonly replaced when the cap is cracked, missing, or no longer forms a proper seal

• One softener dispenser cap as shown

• High-level replacement — remove the dispenser assembly cover before swapping the cap
• Power off and disconnect the washer before servicing to avoid electrical or mechanical injury
• Handle small plastic parts carefully to avoid damage; test dispenser operation after reassembly

This replacement siphon cap seals the siphon/drain connection to help prevent leaks and keep the appliance's drainage operating as intended. It restores a watertight seal and helps reduce drips or odors caused by a compromised cap. What it does:

• Seals the siphon/drain connection to prevent water leaks and drips
• Helps maintain proper drainage by preserving the siphon's seal
• Reduces the chance of odors from slow or exposed drains
• Replaces a worn, cracked, or missing siphon cap to restore normal operation

• One siphon sealing cap

• Turn off and unplug the appliance and shut off the water supply before servicing
• Remove the old cap and clean the mating surface before installing the new cap
• Press the cap into place until fully seated; ensure a snug, leak-free fit

The Detergent Dispenser Box is an OEM part for LG washing machines. Housed within the washer door, this compartment delivers precise amounts of detergent at the optimal time. 

Symptoms of a bad dispenser box include:

• Cracks or breaks compromising the dispenser structure
• Detergent leaking or residual buildup outside of the box
• Failure to fully dispense detergent during wash cycles 

Causes of failure can include plastic fatigue from years of opening/closing the washer door. Repeated impacts may also damage internal mechanisms. This OEM LG part can also be used on Kenmore/Sears appliances. 

This drain hose cap seals and secures the refrigerator defrost drain outlet so meltwater is directed into the drain hose instead of pooling in the cabinet. Replaces a worn or damaged cap to help stop interior leaks and water buildup. What it does:

• Seals the defrost drain outlet to prevent water from spilling into drawers or onto shelves.
• Guides defrost/meltwater into the drain hose and toward the drain pan.
• Helps reduce odors and pests entering through an open drain opening.
• Fits onto the drain outlet to replace cracked, missing, or loose caps.

• Disconnect power before working inside the refrigerator to avoid electrical hazard.
• Remove shelves and drawers as needed to access the drain outlet; clear any visible debris or ice first.
• Press the cap firmly onto the drain outlet/hose until fully seated; avoid excessive force or prying tools.
• After installation, pour a small amount of warm water down the drain to confirm proper flow and seating.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This Cover Cap replaces a missing or damaged cosmetic cap to restore a clean finished appearance and help protect underlying fasteners and openings from dirt. It's a simple, low-cost fix for visible damage. What it does:

• Covers and conceals exposed screw heads, fastener holes, or trim openings for a finished look
• Helps limit dirt and debris accumulation in small openings
• Useful when the original cap is cracked, broken, or lost
• Restores appliance aesthetics without replacing larger panels

• High-level: typically snaps or presses into place; may require removing the adjacent trim or panel for access
• Disconnect power and water (if applicable) before removing panels to avoid electrical or water hazards
• Use gentle prying with a plastic trim tool to avoid scratching surrounding surfaces

The Dispenser Hose is an OEM part for LG washing machines. It connects the detergent dispenser to the washer tub, allowing detergent and other cleaning agents to be delivered effectively during the wash cycle.

Causes of a bad dispenser hose can include regular wear and tear, damage from harsh detergents, or physical damage due to kinks, pinches, or impact. Over time, the hose can become brittle, cracked, or clogged, affecting its ability to function properly.

Symptoms of a bad dispenser hose include:

• Leaks or drips from the hose area
• Detergent not dispensing correctly or at all
• Water pooling around the washer
• Visible cracks or splits in the hose

This OEM LG part is also compatible with Sears/Kenmore models.

The Vent Hose is an OEM part for LG washing machines. This hose is essential for ensuring proper ventilation within the washer, allowing air to circulate and preventing the buildup of moisture and mildew. It helps maintain the efficiency of the washing machine by facilitating the expulsion of air and excess water vapor during operation.

Causes of a bad washer vent hose can include wear and tear over time, blockages from lint or debris, or damage due to bending or pinching.

Symptoms of a bad vent hose include:

• Excessive moisture or condensation inside the washer
• Musty odors from the washing machine
• Visible cracks or holes in the hose
• Poor ventilation leading to inefficient washing cycles

This OEM LG part is also compatible with Sears/Kenmore.

Includes sensor probe

The Dispenser Inlet Hose is an OEM part for LG washing machines. This hose directs water from the water inlet valve to the detergent dispenser, ensuring that water mixes with the detergent before entering the drum for efficient washing. The hose is designed to withstand high water pressure and temperature fluctuations.

Over time, the dispenser inlet hose can become clogged, cracked, or worn out due to regular use. Causes of a bad inlet hose include mineral deposits or debris buildup, wear and tear, and exposure to high temperatures or pressure that can cause the hose to degrade.

Symptoms of a bad dispenser inlet hose include:

• Leaking water around the detergent dispenser area
• Reduced water flow into the dispenser
• Visible cracks or wear on the hose
• Incomplete dissolution of detergent during wash cycles

This OEM LG part is also compatible with Sears/Kenmore.

This inlet hose connects the home water supply to the appliance so it can fill properly. It replaces a worn or leaking supply hose to restore safe, reliable water flow for normal cycles. What it does:

• Directs incoming water from the household supply to the appliance inlet valve
• Works with the appliance's inlet valve and fittings to allow proper fill and rinse actions
• Commonly replaces hoses that leak, spray, kink, or block water flow
• Helps stop slow fills or intermittent filling caused by damaged or deteriorated hoses

• One inlet hose

• Turn off water supply and disconnect power before starting work
• Inspect and replace any damaged O-rings or fittings; use approved replacement fittings if needed
• Hand-tighten connections, then snug with a wrench—avoid over-tightening to prevent damage
• After installation, restore water and power, run a short fill cycle, and check all connections for leaks

The Stator Assembly is an OEM part for LG washing machines. The stator assembly acts as the stationary component of the motor that drives the wash drum and basket. It converts alternating current into mechanical motion through electromagnetic induction, working together with the rotor to power the motor.

Causes of a bad stator assembly can include defects in the windings, bearing wear, or damage due to excessive heat.

Symptoms of a bad stator assembly include:

• The motor failing to start or run
• Abnormal noises coming from the transmission
• Vibration or shaking issues
• Inability to advance cycles

This OEM LG part is also compatible with some Kenmore models.

This is the direct-drive rotor for the dishwasher wash motor. It pairs with the stator to spin the impeller and circulate wash water through the spray arms, helping restore proper spray pressure and quieter operation when the original rotor is worn.

• Couples with the stator to drive the circulation pump impeller
• Moves wash water through the spray arms for consistent cleaning performance
• Common failure signs: little or no spray, poor cleaning, loud humming or grinding from the pump area, or intermittent wash action
• Physical damage or weakened magnets can prevent proper rotation

• Disconnect power and water supply and pull the unit forward for access
• Remove the toe-kick and drain remaining water at the sump
• Remove the pump cover and center fastener, then pull the old rotor straight off
• Seat the new rotor fully, reassemble, and run a test cycle to check operation and leaks

This spring hinge is a direct-replacement door hinge spring that helps the door open and close with the correct tension for smooth, secure operation. It restores proper door movement and helps prevent sagging or uneven closing. What it does

• Provides the spring tension for the door hinge so the door stays aligned and operates smoothly
• Replaces worn, stretched, or broken hinge springs that cause the door to sag or bind
• Reduces noisy, jerky, or uneven door movement related to a failed hinge spring
• Restores correct door closing action and helps improve seal engagement

• One spring hinge

• Disconnect power and remove the door per the appliance service instructions before replacing the hinge spring
• Use appropriate hand tools and keep small fasteners organized; springs may be under tension—wear eye protection and gloves
• Verify correct hinge orientation before tightening; do not force parts into position

The Pressure Switch Assembly is an OEM part for LG washers. This pressure switch plays a crucial role in monitoring the pressure levels within the washer tub during various cycles and phases of operation. It is designed to open and close electrical circuits precisely based on pressure readings, signaling the control board to advance the program as needed. 

Symptoms of a bad pressure switch include:

• Inability to complete cycles 
• Error codes related to pressure 
• Repeatedly stopping or not starting cycles
• Strange noises or vibrations 

Causes of failure can include cracks, corrosion or wear over prolonged use. Replace yours today with this genuine LG part to restore optimal functioning and performance.

This OEM LG part is also compatible with Sears/Kenmore.

The Holder is an OEM part for LG front-loading washing machines. It is a plastic mounting bracket or suspension system that attaches to the rear of the washer tub and helps secure internal components like hoses, pulleys, and the rear bearing in place during spin cycles. Subject to force and vibration, the holder must withstand years of washing use.

Symptoms of a bad holder include: 

• Loosening or detaching internal parts leading to noise and imbalance
• Cracking or damage of the plastic bracketry 
• Bearing or tub damage from improperly secured components

Causes can be fatigue from repeated wash cycles, stress cracks from heavy loads, or material deterioration over time. Replace with this OEM LG holder to maintain drum balance and suspend components securely. It is also compatible with Sears/Kenmore front-load washers.

This power cord assembly restores a secure electrical connection to your appliance so it can safely receive power. It replaces a worn, damaged, or faulty cord to help prevent interruptions and poor contact during normal use. What it does:

• Re-establishes the appliance's main power connection for reliable operation
• Replaces frayed, burnt, or damaged cord insulation and terminals
• Can stop intermittent power loss, sparking, or poor contact at the cord connection
• Provides the correct OEM-fit electrical cord and connector interface

• Always disconnect power at the breaker or unplug the appliance before starting work.
• Tighten terminal screws securely and avoid pinching or kinking the cord.

The Drain Hose Assembly is an OEM replacement part for LG washing machines. It is the hose directly responsible for draining water from the washer tub and out of the home during and after each cycle. 

Symptoms of a bad drain hose assembly include:

• Puddling, pooling, or slowly draining water inside the washer tub  
• Water not fully draining or machine not fully emptying after cycles
• Leaks or drips from hose connections or along its length
• Deterioration, cracking, or splits in the hose material

Causes can be regular wear and tear over extended use, mineral or sediment buildup, cracking from drying out, or accidental damage.

This OEM LG drain hose assembly is also compatible with some Kenmore washer models. 

This pivot hanger assembly supports and stabilizes the appliance component it mounts to, restoring smooth movement and alignment. Replace a worn or damaged pivot to reduce noise and prevent misalignment that can affect operation. What it does:

• Acts as the pivot point for the hanger to support the drum/door assembly and maintain correct alignment
• Helps eliminate squeaks, scraping, or jerky motion caused by a worn pivot
• Prevents sagging or uneven movement that can lead to rubbing or binding
• Restores proper mechanical support so the appliance operates quietly and reliably

• Unplug the appliance or disconnect power before beginning any repair
• Basic hand tools may be required; follow the appliance service manual for disassembly steps
• Inspect surrounding components (mounts, bearings, fasteners) and replace if worn

Restore accurate feedback to your appliance with this sensor assembly. It monitors conditions at its mounting point and relays that information to the control so cooling cycles run correctly and the unit maintains your selected temperature.

• Detects temperature at the sensing location and sends a resistance signal to the main control
• Helps the control regulate compressor and fan operation to maintain setpoint
• Failure can lead to poor cooling performance, short cycling or long run times
• May trigger sensor-related error codes or prevent the unit from reaching the set temperature

• Disconnect power before servicing and allow components to cool
• Access the sensor, noting wire routing and connector orientation
• Release the retainer/clip, avoid pulling on wires, and transfer any insulation or clips from the original part if present
• Route the harness away from sharp, hot, or moving parts; fully seat the connector, reassemble, and test operation

The Main Control Board is an OEM replacement part for LG front-loading washing machines. As the central hub responsible for electrical operations, it oversees cycles, temperature levels, spin speeds, and other critical functions.

Symptoms of a bad main control board include: 

• The washer fails to start or run cycles properly
• Inability to select or change cycle options  
• Fault codes appearing regularly on the display
• Intermittent or strange electrical issues

Causes of a bad control board can be normal wear and tear over time, moisture damage from leaks or flood situations, or failures in electronic components.

This OEM LG replacement part is also compatible with some Sears/Kenmore front-loading washer models. For safety and full functionality, installation by a qualified technician is highly recommended.

This hose clamp secures a rubber hose connection to prevent leaks where the hose meets its fitting. A tight, uniform seal helps maintain proper water flow and keeps the appliance operating reliably.

• Provides a tight, 360-degree seal around the hose barb/fitting
• Helps correct issues like water leaks at the hose connection point
• Maintains correct hose attachment during operation and vibration
• Step-less ear design distributes clamping force evenly

• Unplug power and shut off water supply before servicing
• Note clamp orientation and hose routing before removal
• Use appropriate ear-clamp pincers or pliers to compress the clamp evenly
• Check the hose and fitting for wear; replace if cracked or deformed

The Clamp is an OEM part for LG washing machines. It is used to secure the hose connections within the washer, ensuring that water flows correctly without leaks.

Over time, the clamp can become worn or damaged due to repeated exposure to water, vibration, or general wear and tear. If the clamp fails, it can lead to water leaks or hoses becoming detached.

Symptoms of a bad clamp include:

• Water leaking from hose connections
• Hoses coming loose or detaching during operation
• Visible rust or damage on the clamp
• Poor water flow or pressure issues

This OEM LG part is also compatible with Sears/Kenmore models.

This hose clamp secures a washer hose to its fitting to maintain a tight, leak-resistant connection. Replace a weakened or damaged clamp to stop seepage at hose joints and keep the washer operating reliably.

• Holds the hose firmly on pump, tub, or drain fittings to help prevent leaks
• Maintains clamping pressure during operation and vibration
• Replace if rusted, bent, cracked, or no longer holding tension
• Typical symptoms: water dripping at hose connections or a hose that slips off

• Disconnect power and shut off water; drain any remaining water from the unit
• Release and slide back the old clamp, then remove the hose
• Fully seat the hose on the fitting and position the clamp just behind the hose bead/ridge
• Secure the clamp and run a brief test to check for leaks

A replacement hose clamp that secures a flexible hose to its fitting to help prevent leaks and disconnections. Restores a tight, reliable seal so hoses stay seated during normal use. What it does:

• Holds a rubber or plastic hose firmly to a pump, valve or connection to prevent leaks.
• Helps stop hose pull-off that can cause water leaks or appliance interruptions.
• Commonly replaced when clamps are corroded, bent, cracked or missing.
• Works as a low-cost repair to restore a secure hose connection without replacing the hose assembly.

• Disconnect power to the appliance and shut off the water supply before servicing.
• Use the correct tool (slip-joint pliers for spring-style clamps or a screwdriver for screw-type clamps) and avoid pinching the hose.
• Inspect the hose and fitting for damage; replace the hose if it's cracked or excessively worn.
• After installing, restore power/water and run a short test cycle or check for leaks.

The NOISE FILTER ASSEMBLY is an OEM part for LG washing machines. It is a component designed to minimize vibrations and reduce noise emanating from the washer during operation. Proper noise damping is important for smooth functionality without disturbance.

Causes of a bad noise filter assembly can include cracks or tears developing over extended use. Physical damage from impact could also compromise its noise-blocking abilities. 

Symptoms of a bad noise filter assembly include:

• Loud banging or clanking noises during wash and spin cycles
• Excessive vibrations felt through the washer cabinetry 
• Increased stress on other components from inadequate dampening
• Premature wear of suspension components like legs and runners

Replace yours today with this genuine OEM LG part to restore a quiet wash experience. This replacement assembly ensures optimum vibration control. It is also compatible with Sears/Kenmore models.

This door gasket creates a tight perimeter seal between the door and cabinet to keep interior conditions stable and outside air and moisture out. Replacing a worn gasket restores a proper seal and helps reduce condensation, frost, and energy loss.

• Forms a continuous seal between the door and chassis to prevent air exchange
• Helps maintain consistent interior conditions and overall efficiency
• Reduces moisture intrusion that can lead to condensation or frost along the door edge
• Common signs of failure: tears, cracks, warping, gaps, loose corners, or a door that won't seal fully

• Disconnect power before servicing
• Let the new gasket warm and relax (room temperature or gentle warming) to ease installation
• Clean the mounting channel/sealing surfaces before fitting the gasket
• After installation, check alignment and sealing all around the door

This connector nozzle is the small replacement plumbing piece that directs water between internal components, restoring proper spray and flow where a worn or damaged nozzle causes leaks or weak/erratic water delivery. What it does

• Channels water from the supply path to the spray/nozzle outlet to maintain correct flow
• Keeps seals and adjoining fittings aligned to prevent leaks
• Replaces cracked, clogged, or broken nozzle pieces that cause weak spray or misdirected water
• Helps stop dripping or continuous flow caused by damaged connector ends

• Connector nozzle

• Disconnect power and water supply before attempting repair
• Handle carefully to avoid damage to mating surfaces and seals; replace any worn gaskets
• Basic hand tools typically required; follow your appliance's service manual for disassembly and torque guidance

A molded water guide that routes dispenser water inside the refrigerator to the dispenser/ice area, helping direct flow and reduce splashing. Fits the factory mounting points for a clean, secure path for water. What it does

• Channels water from the inlet tubing toward the dispenser/ice assembly to prevent misdirected flow.
• Helps keep water from pooling or dripping inside the cabinet or on internal components.
• Common replacement when you see water on shelves, puddling near the dispenser, or reduced or misdirected dispenser flow.
• Preserves proper alignment of the dispenser plumbing to prevent kinks or strain on tubing.

• One water guide (single molded channel) as shown.

• Turn off the refrigerator and shut off the water supply before starting; disconnect power for safety.
• Remove interior panels or shelves as needed to access mounting points; keep fasteners for reassembly.
• Inspect adjoining tubing and seals for damage and replace any worn components to ensure a leak-free fit.
• After installation, restore power and water, then check carefully for leaks during an initial test dispense.

The Air Chamber is an OEM part for LG washing machines. This part connects to the pressure switch and ensures the washer machine fills with the correct amount of water for the selected cycle. 

Causes of a bad  Air Chamber can include clogging due to detergent residue or debris, cracks or perforations that lead to air leaks, and aging of the material, which might compromise its integrity and function.

Symptoms of a faulty Air Chamber include:

• Inaccurate water level readings leading to overfilling or insufficient water during cycles
• Unusual noises during the fill cycle, indicating air escaping
• The washing machine failing to start the wash cycle due to improper water level detection
• Error codes displayed on the machine that relate to water level issues

This OEM LG part is also compatible with some Kenmore models.

This spring-style hose clamp secures a washer's rubber hose to its fitting to maintain a tight, leak-resistant seal. Replacing a weakened clamp helps stop drips and keeps the hose firmly in place during operation.

• Provides constant spring tension to hold a rubber hose on its port
• Helps prevent leaks at the connection point
• Resists vibration so the hose doesn't back off the fitting
• Common signs include water at a hose joint, a loose/detached hose, or a rusted/broken clamp

• Disconnect power and turn off water supply before servicing
• Place a towel or pan to catch residual water from hoses
• Use pliers to compress the ears, slide off the old clamp, position the new clamp behind the hose bead, and release evenly
• After reassembly, run a quick test cycle and check for leaks

The Damper Assembly is an OEM replacement part for LG washing machines. It is a critical component that helps regulate the balance and vibration levels during the spin cycle.

Causes of a bad damper assembly in a washing machine can include excessive wear and tear due to repeated high-speed spinning, damage from excessive vibrations or unbalanced loads, or failure of the internal components responsible for dampening and stabilizing the tub motion.

Symptoms of a bad washing machine damper assembly include:

• Excessive shaking or vibrations during the spin cycle
• Loud thumping or banging noises
• The washer visibly moving or walking across the floor
• Potential leaks due to increased stress on the tub and other components

This OEM LG part is also compatible with Sears/Kenmore models.

The Hinge Pin is an OEM part for LG washing machines. It serves as a pivot point for the washer door, allowing it to open and close smoothly. This component is crucial for maintaining the proper alignment and function of the washer door, ensuring a secure and reliable seal during operation.

Common causes of a bad hinge pin include frequent use leading to wear and tear, physical damage from accidental impacts, or rust and corrosion over time. A compromised hinge pin can result in misalignment of the door, affecting the washing machine's ability to close properly and maintain an effective seal.

Symptoms of a bad hinge pin include:

• Difficulty opening or closing the washer door
• Door not staying securely closed during operation
• Squeaking or grinding noises when the door is moved
• Visible wear or damage to the hinge pin

This OEM LG part is also compatible with Sears/Kenmore models.

This connector nozzle is a small replacement plumbing/airflow fitting that restores a secure, directed connection between hoses or tubing in compatible LG appliances. It helps stop leaks and keeps fluid or airflow routed where it belongs. What it does

• Provides a sealed connection point for a hose or tube to the appliance
• Directs fluid or air flow through the intended channel to prevent leaks or misrouting
• Replaces worn, cracked, or damaged nozzles that cause dripping or reduced performance
• Fits into the appliance's existing plumbing or tubing coupling to restore proper operation

• One connector nozzle

• Turn off power to the appliance before beginning work
• Shut off the water supply and relieve any pressure if the nozzle is part of a water line
• Remove only the damaged nozzle and install the replacement by seating it fully and securing clamps or fittings as originally installed
• If you notice persistent leaks after installation, recheck hose seating and clamps.

This DC pump motor assembly drives the appliance pump to move and remove water during drain and circulation cycles. It restores pump operation so the washer/dishwasher can empty properly and avoid standing water. What it does:

• Powers the drain/recirculation pump to move water out of the tub during drain and wash cycles.
• Common repair when the appliance fails to drain, leaves standing water, or shows drain-related errors.
• Helps restore normal water flow for wash, rinse and drain sequences.

• Disconnect power (and water, if applicable) before servicing the appliance.
• Inspect hoses, filters and the pump housing for clogs before replacing the motor.
• Note connector orientation and mounting location; transfer gaskets/seals if the original must be reused.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.