Parts for Whirlpool WED8500BR0: 03 - Cabinet Parts

U-type clip nut slides onto sheet metal panels to create threaded anchor points for screws. Replace if broken, missing, or worn during repairs.

Mounts the washer top panel to the cabinet frame. Replace if screw is stripped, rusted, missing, or damaged during cabinet disassembly and repair work.

This 8-18 x 5/8-inch screw secures dryer panels, brackets, and covers. Replace missing or stripped fasteners to restore a tight fit and stability.

Dryer won't heat or stops working? A burnt or melted terminal block disrupts power flow. DIY repair in under an hour with video guidance included.

Dryer won't start or run? A faulty belt switch often causes this when the belt snaps or slips. This switch monitors belt tension and is a fairly easy fix.

Flat head screw secures panels, brackets, or trim for a flush fit on your dishwasher. Replace worn or missing screws to prevent rattling and shifting.

Dryer cabinet housing that encloses internal components. Replace if the outer cabinet is cracked, dented, rusted, or structurally damaged beyond repair.

Adjustable leveling foot for dryers. Replaces worn, broken, or missing legs to stabilize your dryer and stop rocking on uneven floors.

If your dryer motor has come loose or makes grinding noises, this motor clamp secures the drive motor. Simple DIY repair with basic tools in under an hour.

Idler arm spring maintains tension in your dryer's belt system. Replace if spring is stretched, broken, or unable to keep proper tension on the drum belt.

Secures the idler pulley to maintain proper drum belt tension in your dryer. Replace if worn, loose, or causing squealing noises. Confirm fit with your model.

Idler pulley assembly maintains tension on the dryer belt. Replace if the pulley wheel is worn, seized, or makes squealing noise during operation.

Fix a dryer that won't heat or has burning smell at the power connection. This terminal wire kit replaces burned wires and connectors. Easy DIY repair.

Replacement screw secures panels, brackets, and internal assemblies. Needed when original hardware is stripped, corroded, or missing to keep parts tight.

Fix loud squealing or slipping drum with this dryer motor pulley. Restores proper belt tracking and smooth drum rotation. Moderate DIY repair.

Secures the front panel to the dryer cabinet. Replace if cracked, broken, or damaged during disassembly. Installs at the panel-to-cabinet seam.

Mounting plate for dryers. Secures and supports internal components. Replace if cracked, bent, or damaged to restore proper structural integrity.

Replace your dryer's door hinge if it's cracked, broken, or causing the door to sag. This hinge mounts on the front panel to support proper door operation.

Replaces broken or bent dryer door hinge pin assembly. Secures door pivot, restores proper alignment, and ensures smooth opening and closing.

Foam seal cushions and seals dryer components to reduce vibration and prevent air leaks. Replace if worn, cracked, compressed, or missing.

Dryer door gasket seals the door to prevent heat loss and improve drying efficiency. Replace if torn, cracked, or causing air leaks. Verify fit with your model number before ordering.

Sound absorber insulation pad for dryers. Installs inside cabinet to dampen noise and vibration. Replace if torn, compressed, or missing.

Dryer belt slipping off motor pulley or making squealing noises? The belt restrainer keeps the drive belt aligned. Moderate DIY repair with video guide.

3 groove blower belt pulley mounted on motor shaft.

Transfers power from motor to drum for tumbling. Replace if dryer won't spin, makes squealing noises, or belt shows fraying. Verify fit by model number.

Dryer door won't stay closed or latch properly? This door catch securely holds the door shut during operation. Easy DIY repair in under 30 minutes.

Dryer won't power on or has loose power cord connection? This terminal block screw kit secures electrical connections. Easy DIY fix in 15 minutes.

If assemblies shift or rattle during dryer operation, this snap-down locator clip secures components in place. Simple snap-in installation restores alignment.

Dryer door won't stay closed? This door strike engages with the catch to secure the door. Simple DIY fix in minutes with basic tools and video guide.

Secures washer door handles to the outer panel. Replace if stripped, missing, or damaged to restore a tight handle fit and prevent loosening.

White plastic hole plug for dryer cabinet panels. Covers unused mounting holes for a clean finish. Replace when missing, cracked, or discolored.

Dryer door seal prevents air leaks and retains heat inside the drum. Replace when loose, torn, or causing heat loss. Includes adhesive. Verify fit.

Screw secures appliance panels and access covers. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattles or gaps.

Dryer runs with door open? This door switch detects when the door closes, restoring proper start/stop control. Simple DIY fix in under 30 minutes.

Control panel for your dryer. Installs on the top or front console housing. Replace if cracked, damaged, or buttons are worn and unresponsive.

If your dryer top panel rattles or won't stay secure, this panel lock restores a tight fit to the front frame. Quick DIY fix eliminates gaps and vibration.

Seals the gap between the dryer bulkhead and front panel around the door opening. Replace if torn, deformed, or causing air leaks. Confirm fit by model.

Replace your dryer's cracked, broken, or missing cover panel. This structural part restores the exterior appearance and protects internal components.

Supports and pivots the hinged dryer top panel for service access. Replace if cracked, broken, or causing wobble, scraping, or alignment gaps.

1/4-inch hex flange nut secures panels, brackets, and hardware in dryers, ovens, and ranges. Replace if worn, stripped, or missing to restore firm connections.

Replacement spacer for your dryer. Maintains proper spacing between components during assembly. Order a new spacer if yours is missing or damaged.

Dryer drum seal prevents heat loss and improves efficiency. Replace if clothes take longer to dry or you notice gaps around the drum. Confirm fit with your model.

Adjustable leveling foot that screws into the bottom of your dryer cabinet. Replace missing, broken, or cracked feet to stabilize and level your unit.