Parts for Lg MVEL2125F/00: Door Parts

Template card for microwave/hood combo units. Installs as a reference guide or installation template. Replace if lost, damaged, or missing during installation.

Binding head screw that fastens microwave panels and components. Replaces missing, stripped, or damaged screws to restore secure assembly and eliminate rattling.

Replacement mounting screw for microwave panels and components. Secures loose or rattling parts when original screws are stripped, missing, or damaged.

Replacement screw for securing panels, brackets, and internal components. Restores tight fit and proper alignment when original hardware is stripped or missing.

Secures panels, brackets, or internal components in your microwave. Replace this fastener if it's missing, stripped, or damaged to restore stability.

Fastener nut secures internal components in your microwave. Replace if stripped, rusted, or missing to restore tight hold and proper panel alignment.

Replacement door frame assembly for microwaves. Installs above the microwave door and holds the air filter. Order when original is cracked or damaged.

Plastic film covers holes in the microwave inner door frame. Replace if bubbled, burned, cracked, or peeling. Attaches to door glass assembly.

Protective shield that covers internal components on the microwave door. Replace if cracked, broken, or tabs have snapped off during handle or latch repair.

Fix a microwave door that won't latch or close properly with this door latch hook. This metal hook secures the gasket for a tight seal. DIY repair in minutes.

Microwave door won't stay closed or latch? This door latch spring provides tension to secure the door shut. DIY repair in under 10 minutes with video help.

Replacement door handle for microwave doors. Restores secure grip when original handle is cracked, loose, broken, or missing. Mounts to door exterior.

Lamp holder assembly secures and connects the light bulb in your microwave hood combo. Replace if lights flicker, don't turn on, or bulb won't stay in place. Confirm fit with your model number.

Fix inadequate cooling or exposed evaporator tubing. This U-bend case protects refrigerator evaporator tubing and directs airflow for effective cooling.

Replacement glass turntable tray for your microwave cavity. Sits on the roller support and rotates food during heating. Order if your tray is cracked or broken.

Wire harness for microwaves and microwave/hood combos. Connects internal electrical components. Replace if damaged, frayed, or burnt connections.

Fix uneven heating or wobbling turntable with this rotating tray assembly. Replaces damaged or missing parts to restore smooth rotation and consistent cooking.

Fix a microwave turntable that won't rotate with this AC synchronous motor. Common repair for models that heat but don't turn. Takes 15-30 minutes.

Mounting plate for microwave installation. Secures microwave unit to wall or cabinet. Replace if bent, cracked, or damaged during installation or removal.

Turntable not rotating or making noise? This coupler shaft connects the motor to the glass tray for even heating. Takes seconds to install—no tools needed.

Replacement lower front grille vent for refrigerators. Covers the airflow opening to protect internal components. Restores proper ventilation if original is cracked, warped, or missing.

Secures the interior light bulb in your microwave. Replace if the lamp is loose, rattles, or won't stay in position. Verify fit with your model number.

Captures grease and cooking residue from exhaust air to protect the blower and maintain airflow. Replace when saturated or damaged. Confirm fit with your model.

Weak or no ventilation? This microwave fan motor restores proper airflow to prevent overheating and eliminate cooking odors. Direct repair.

Threaded nut assembly secures internal components in your microwave. Replace if stripped, worn, or missing to eliminate rattling and maintain alignment.

Insulator cover for microwave/hood combo units. Replaces damaged, cracked, or missing insulation covers. Installs inside cavity to protect components.

Cosmetic trim panel for the microwave front. Covers mounting points and finishes the control area. Replaces cracked, broken, or missing trim pieces.

LED light assembly for microwave hood combos. Installs in the light housing to illuminate the cooktop. Replace if cracked, dim, or not lighting properly.

Secures and protects your microwave's filter, maintaining proper airflow and positioning. Replace if cracked, broken, or filter won't stay in place. Verify fit with your model number.

Mounting bracket that secures internal microwave components. Replace if your original bracket is cracked, broken, worn, or missing to restore stability.

Inner perimeter trim that snaps onto the microwave door frame. Secures the door choke and maintains proper shielding. Replace if cracked, broken, or missing.

Fix a microwave vent drawer that won't stay closed or secure. This hood locker catches and holds the sliding vent in position. DIY repair in 30 minutes.

Fix a microwave door that won't stay closed or latch properly with this door locker mechanism. Simple repair restores secure door closure.

Microwave not heating evenly or turntable wobbling? This glass turntable plate rotates food for consistent heating. Simple 2-minute swap—no tools needed.

Mounting support bracket for microwaves and microwave-hood combos. Secures unit to cabinet or wall. Replace if bent, cracked, or missing hardware.

Fix a microwave door that won't close or latch properly. This door latch holder secures the latch assembly for reliable door alignment and operation.

Fixes microwave that won't start, won't heat, or shuts off during cooking. This door lock holder assembly includes all 3 safety switches. Moderate DIY repair.

Microwave won't start or runs with door open? Failed door switch prevents safe operation. Simple DIY fix with basic tools in under 30 minutes.

Microwave won't start or runs with door open? This interlock door switch is a common fix. DIY repair in under 30 minutes with a torx bit.

Fix a microwave door that won't stay closed or pops open during use. This latch keeper holder restores proper door catch and alignment for safe operation.

Microwave not heating or sparking inside? This high voltage capacitor stores power for the magnetron. Common repair taking 30-45 minutes with care.

Microwave won't turn on or trips breaker? The time delay fuse protects against power surges. Located by the magnetron. Moderate DIY repair.

Mounting bracket for microwave and microwave/hood combo units. Secures the appliance to the wall or cabinet. Replace if bent, cracked, or missing.

Fix inaccurate cooking or sensor errors with this microwave sensor bracket. Secures the humidity sensor for proper automatic cooking. Simple 15-minute repair.

Exhaust duct for microwave hood combo venting system. Replaces cracked, damaged, or missing ducts. Connects unit to external vent opening for proper airflow.

Fix loud rattling or scraping noises from your microwave with a new cooling fan blade. Prevents overheating by circulating air around internal components.

If your microwave stops heating after less than a minute but the display stays on, the high voltage transformer may have failed. Moderately difficult repair.

Microwave won't heat but runs normally? A failed magnetron is the likely cause. This part generates the microwaves that cook food. Moderate DIY repair.

Fix F4 error codes or sensor cook failures with this microwave humidity sensor. Restores automatic cooking cycles. Moderate DIY difficulty.

Fix loud noise, humming, or overheating in your microwave. This cooling fan motor restores proper airflow. Moderate difficulty repair with basic tools.

Microwave won't turn on or has no power? A failed thermostat often causes complete power loss. Moderate DIY repair requires disassembly to access.

Microwave not heating or making loud buzzing noise? The high voltage diode regulates power to the magnetron. DIY repair typically takes 30-45 minutes.

Microwave won't turn on or keeps blowing fuses? This fuse assembly with wiring harness restores overcurrent protection. Direct replacement part.

Microwave suddenly loses all power? This thermal safety thermostat monitors temperature and cuts power when overheating occurs. DIY-friendly repair.

Mounting bracket for microwaves. Secures the unit to cabinetry or wall. Replace if bent, cracked, or missing to ensure proper installation support.

Interior bottom plate panel for microwaves. Covers and protects the oven floor from spills and debris. Replace if cracked, warped, stained, or missing.

Protects microwave interior light bulb from grease and moisture. Replace if cracked, discolored, or broken to restore proper lighting. Verify fit with your model.

Removes cooking odors, smoke, and grease from recirculating microwave vents. Replace when odors persist despite cleaning. Confirm fit by model number.

Noise filter assembly reduces operational sound in your microwave. Replace if you notice increased noise or vibration during use. Verify fit with your model number.

Structural mounting bracket for microwave installation. Secures microwave to wall or cabinet. Replace if bent, cracked, or missing for safe support.

Fix scraping and clunking noises from your microwave with this motor support bracket. Secures motor positioning and reduces vibration. 10-minute repair.

Replacement filter support plate for microwave ovens. Secures and positions the grease filter in place. Order a new part if yours is cracked or broken.

Exhaust duct for over-the-range microwaves. Replaces cracked, damaged, or missing ducts that vent cooking fumes and steam from your kitchen.

Mounting supporter bracket for microwaves. Installs on cabinet or wall to provide structural support. Replace if bent, cracked, or missing hardware.

This box-style film capacitor helps stabilize and filter voltage in the appliance's control/power circuitry, protecting electronics from spikes and electrical noise for more reliable operation. What it does

• Smooths and filters voltage to reduce electrical noise and transient spikes.
• Helps ensure stable operation of control boards and motor drives.
• A failing capacitor can cause intermittent operation, control errors, or failure to start.
• Commonly used where low-loss, stable capacitance is required for power or signal circuits.

• Disconnect power to the appliance before servicing.
• Discharge the capacitor fully before touching terminals to avoid shock.
• Inspect mounting and wiring; replace with identical type and polarity/orientation if required.

Rotating support plate that sits beneath the microwave glass turntable tray. Replace if cracked, broken, or worn to restore stable, centered rotation.

Metal mounting plate for over-the-range microwaves. Installs between wall/cabinet and microwave unit to anchor and stabilize. Replace if missing or damaged.

Complete hardware kit for mounting your microwave. Includes all brackets, screws, and fasteners needed for secure installation. Replaces missing or damaged parts.

Holds the damper assembly in place inside the microwave cavity above the wave stirrer. Replace if bracket is bent, broken, or missing during installation.

Exhaust damper for microwave venting systems. Installs on rear exhaust to regulate airflow. Replace if cracked, broken, missing, or not sealing properly.