Parts for Lg LFXS24663S/01: Freezer Parts

Replacement mounting screw for refrigerator panels, brackets, and internal components. Needed when original fastener is missing, stripped, or damaged.

Secure refrigerator panels, brackets, and internal components with this replacement mounting screw. Ideal for missing, stripped, or damaged fasteners.

Replacement mounting screw for securing panels, brackets, and assembliance components. Needed when original screws are missing, stripped, or damaged.

Replace your refrigerator's rear handle if it's cracked, broken, or missing. This structural support handle mounts to the back panel of your unit.

Secures the refrigerator door assembly to the cabinet frame for proper alignment and a flush close. Replace if cracked, broken, or worn to eliminate rattling.

Plastic drain tube that channels defrost water from evaporator coils to drain pan. Replace if cracked, melted, broken, or causing water leaks in freezer.

Adjustable leveling leg assembly stabilizes your refrigerator and ensures proper door alignment. Replace worn legs to reduce vibration and noise. Confirm fit.

Mounting bracket that supports the dispenser paddle behind your refrigerator's front panel. Replace if cracked, broken, or lever feels loose or misaligned.

Spring for the ice door lever mechanism in your refrigerator's dispenser. Replace if the spring is stretched, broken, or missing and the ice door won't stay closed.

Replacement air duct for bottom-mount refrigerators. Routes cold air between compartments. Replace if cracked, broken, or causing poor airflow distribution.

Holder assembly for bottom-mount refrigerators. Replaces broken, cracked, or missing holder components. Secures internal parts in place.

Plastic rail holder that secures shelf rails inside your refrigerator. Replace this component when cracked, broken, or missing to restore shelf stability.

Replaces broken or worn rail guide assembly that supports smooth drawer sliding in your refrigerator. Restores alignment when the guide is cracked or damaged.

Supports and guides refrigerator drawers along their track for smooth sliding. Replace if cracked, broken, or worn to restore proper drawer alignment.

Replacement freezer drip tray that installs inside the freezer compartment to catch drips and keep the interior organized. Replaces cracked or missing trays.

Small protective cap covers component connections or openings in your refrigerator. Replace when cracked, missing, or worn to protect against dirt and moisture.

Freezer drawer roller assembly for refrigerators. Installs on bottom drawer to enable smooth gliding. Replace if roller is cracked, broken, or worn.

Roller assembly for refrigerator freezer drawers. Replaces broken, cracked, or missing rollers that prevent smooth drawer gliding. Snaps into place.

Drawer tray assembly for bottom-mount refrigerators. Replaces cracked, broken, or damaged drawer trays. Installs in refrigerator compartment.

Replaces the drawer liner tray that forms the structural shelf inside your refrigerator drawer. Needed when the original is cracked, warped, or broken.

Replace a damaged or missing refrigerator shelf net. This support component installs in the fresh food compartment to organize and secure items on shelves.

Refrigerator shelf support net that secures items on door shelves. Replace if cracked, broken, or missing to restore proper shelf functionality.

Replace a cracked, chipped, or missing glass shelf in your refrigerator. This single shelf assembly installs inside the fridge to restore organized storage.

Replaces worn or broken drawer rail guide to restore smooth sliding and proper alignment. Install when drawers stick, wobble, or won't close. Confirm fit with your model.

Secures and aligns internal refrigerator components to maintain proper panel positioning. Replace if parts shift or rub. Verify fit with your model number.

Mounting guide that aligns and secures the refrigerator's front panel to the cabinet. Replace if cracked, broken, or causing panel misalignment.

Replacement rail holder that secures sliding rails in your refrigerator. Installs on the frame to restore alignment. Needed when cracked or broken.

Microwave door won't close properly or wobbles? This rail holder secures the door rail assembly to restore smooth alignment and operation.

Refrigerator shutter control knob that mounts on the air damper assembly. Replace this knob if it's cracked, broken, or missing to restore proper operation.

Replacement crisper drawer for your refrigerator's fresh produce compartment. Replaces cracked, broken, or missing vegetable trays in bottom-mount models.

Plastic crisper drawer that slides into the fresh food compartment. Replace if cracked, discolored, or no longer holding vegetables securely in place.

Rear cabinet cover assembly for bottom-mount refrigerators. Replaces cracked, warped, or missing rear panel to protect internal components and restore finish.

Replaces cracked, broken, or missing ice tray cover in your refrigerator. Protects stored ice from odors and debris while ensuring proper bin stacking.

Replacement glass shelf for refrigerator crisper drawer. Installs over vegetable/fruit compartment. Needed when original is cracked, shattered, or broken.

Fresh Room tray assembly that forms the shelf supporting the deli drawer in your refrigerator. Replace when cracked, broken, or missing to restore storage.

Replace worn freezer door foam insulation to restore cooling efficiency and prevent frost buildup. Improves temperature retention. Confirm fit with model.

Restores the appearance of your refrigerator door with this factory-style handle trim piece. Replaces cracked, bent, or worn handles for a clean look.

Decorative door handle trim for refrigerators. Installs on the refrigerator door to restore appearance and provide a finished grip area. Replaces worn, cracked, or missing handle trim.

Exterior emblem nameplate that mounts to your refrigerator's front panel. Replaces missing, cracked, or faded badges to restore a clean look.

Small stopper that fits inside the handle assembly to limit travel and keep the handle properly seated. Replace if worn, missing, or broken to restore secure feel.

Door foam insulation assembly for bottom-mount refrigerators. Installs inside door panel to maintain temperature. Replace if cracked, compressed, or missing.

Home bar case assembly for bottom-mount refrigerators. Replaces cracked, broken, or damaged home bar housing. Installs on door to hold bar components.

Home bar case assembly for bottom-mount refrigerators. Replaces cracked, broken, or damaged home bar housing. Installs on door to hold bar components.

Home bar case assembly for bottom-mount refrigerators. Replaces cracked, broken, or damaged home bar housing. Installs on door to hold bar components.

Secures and aligns refrigerator components to prevent shifting during use. Replace if bracket is cracked, broken, or missing to restore stable mounting.

Secures the door handle firmly to your refrigerator door. Replace this bracket assembly if it's cracked, stripped, or causing handle wobble or misalignment.

Refrigerator door gasket creates an airtight seal to maintain temperature. Replace if cracked, torn, or compressed to prevent warm air leaks and energy waste.

Seals the left refrigerator door to prevent warm air entry and maintain temperature. Replace if torn, cracked, or not sealing properly. Confirm fit.

Connects French doors on refrigerators. Replace if cracked, broken, or spring-damaged. Installs between doors to maintain proper seal alignment.

Home bar case assembly for bottom-mount refrigerators. Replaces cracked, broken, or damaged home bar housing. Installs on door to hold bar components.

Home bar case assembly for bottom-mount refrigerators. Replaces cracked, broken, or damaged home bar housing. Installs on door to hold bar components.

Replacement door basket for refrigerator door storage. Installs in door slots to organize bottles, jars, and containers. Replaces cracked or broken bins.

Replacement door bin for refrigerator door storage. Holds bottles, jars, and condiments securely. Replace if cracked, broken, or missing to restore organization.

Replace a cracked, broken, or missing refrigerator door bin to restore organized storage for condiments, jars, and beverages on your fresh food door.

Replacement door basket assembly that mounts to the inner refrigerator door. Restores storage space when your original bin is cracked, broken, or missing.

Door stop assembly for bottom-mount refrigerators. Mounts inside the door to control door closing and sealing. Replace if broken, cracked, or missing.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

Replace your cracked, scratched, or discolored refrigerator door handle. Installs on fresh food or freezer doors for a secure grip and updated look.

Replace a cracked, broken, or damaged refrigerator door handle. Installs on the refrigerator door to provide a secure grip for opening and closing.

Slide rail for bottom-mount refrigerator freezer drawer. Replaces broken, binding, or worn rails that prevent drawer from opening or closing smoothly.

Slide rail for bottom-mount refrigerator freezer drawers. Replaces broken, cracked, or binding rails causing uneven drawer movement or closure issues.

Fixes intermittent cooling or component failures caused by loose or damaged wiring connections. This connector assembly restores secure electrical links.

Adjusts refrigerator door height for proper alignment and sealing. Replace if door doesn't close easily or seal correctly. Verify fit with model number.

Secures components inside your refrigerator. Replace if broken or missing to prevent rattling and ensure proper part alignment. Confirm fit with model.

Replaces the top door pivot to restore proper alignment and smooth opening. Install when your refrigerator door sags or seals unevenly. Confirm fit with model.

Secures and guides your refrigerator door for smooth opening and closing. Replace if door sags, rubs, or won't seal properly. Confirm fit by model number.

Upper hinge assembly supports your refrigerator door and ensures smooth opening. Replace when door sags or gaps appear. Verify fit with your model number.

Front housing for your refrigerator's control panel. Replaces cracked, scratched, or broken display covers. Restores a clean, finished appearance.

Hinge cover assembly for refrigerators. Replaces broken, cracked, or missing hinge covers on door hinges. Restores appearance and protects mechanism.

Fix a stuck, broken, or unresponsive water/ice dispenser lever on your refrigerator. Direct replacement part installs in minutes with basic tools.

Secures and seals refrigerator duct connections to maintain proper airflow and prevent leaks. Replace if worn or damaged. Verify fit with your model.

Secures and aligns refrigerator doors for smooth operation. Replace if doors sag, misalign, or don't seal properly. Confirm fit with your model number.

Fix a refrigerator that's not cooling properly with a new evaporator assembly. This part absorbs heat to keep your fridge cold. Moderate DIY repair.

Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.

Refrigerator not cooling or freezer warm? The compressor assembly circulates refrigerant to maintain temperature. Professional installation recommended.

Refrigerator not cooling? This compressor overload protector prevents motor overheating by cutting power when current spikes. DIY-friendly repair.

Refrigerator stopped cooling after power outage? The compressor overload protector prevents overheating damage. Easy DIY fix when compressor won't run.

Fix erratic temperature readings or sensor errors with this PTC sensor cover. Shields the sensor from debris and damage. Simple 5-minute snap-on repair.

Fix refrigerator vibration and rattling noise with this compressor damper. Cushions the compressor to reduce metal-on-metal contact and wear.

Replaces broken or missing refrigerator door stop. Limits door travel to prevent over-extension and maintain proper alignment and smooth operation.

Fix a noisy or vibrating refrigerator with this compressor base assembly. Supports and secures the compressor for proper cooling. Moderate DIY repair.

Fix refrigerator not cooling properly or running constantly with a new drier assembly. Removes moisture from refrigerant. Requires EPA-certified technician.

Drip pan for refrigerators. Installs beneath the appliance to collect condensation. Replace if cracked, warped, or missing to prevent water damage.

Drain tray assembly that collects condensation under your refrigerator. Replace if the original tray is cracked, broken, or missing to prevent leaks.

Refrigerator not cooling properly? A faulty condenser wire assembly disrupts heat removal. This replacement part restores proper refrigeration function.

Fix a refrigerator not cooling properly with this evaporator fan assembly. Common solution for warm fridge or freezer compartments. DIY-friendly repair.

Fix a noisy or non-working refrigerator fan that's causing ice buildup or warm temperatures. This motor replacement restores proper airflow in 30-60 minutes.

Freezer frosting over or refrigerator not cooling? A damaged evaporator fan blade disrupts airflow. This replacement restores circulation and temperature.

Fix error code ER DH or ice buildup in your freezer with a new defrost control assembly. Regulates defrost cycles to prevent frost. Moderate DIY repair.

Is your refrigerator running warm or not cooling properly? This condenser fan motor circulates air to cool the compressor system. Direct replacement part.

Fix a refrigerator not cooling properly or displaying ER RF codes with this evaporator fan motor. Ensures even cooling throughout your fridge. DIY repair.

Freezer too cold while fridge is warm? This damper motor support controls airflow between compartments. Common fix for temperature imbalance issues.

Fix noisy refrigerator operation with this evaporator motor grommet. Reduces vibrations and quiets motor noise. Moderately easy DIY repair.

Replaces a worn or broken evaporator fan motor grommet in your refrigerator. Cushions the motor to reduce vibration and noise during operation.

Controls ice dispenser door opening and closing. Replace if door won't open, stays open, or motor makes no sound when dispensing. Mounts behind dispenser trim.

Excessive vibration or motor noise? This motor mounting bracket secures the motor to reduce vibration and maintain proper alignment in your refrigerator.

LED assembly backlight strip for refrigerators. Restores even interior lighting and improves visibility. Replace when lights flicker or fail. Confirm fit with your model number before ordering.

Illuminates refrigerator interior when door opens. Replace when light dims, flickers, or fails to restore bright visibility. Verify fit by model number.

Compressor humming but not starting? This start capacitor provides stable starting power to your refrigerator compressor. DIY-friendly repair.

Refrigerator won't start or compressor struggles to run? The run capacitor provides the power boost needed to start and maintain compressor operation.

Refrigerator won't power on or no electrical connection? This power cord assembly connects your refrigerator to the wall outlet. Direct plug-in part.

Refrigerator not cooling? This compressor overload protector prevents motor overheating by cutting power when current spikes. DIY-friendly repair.

Dryer not heating or taking too long to dry? This heating element generates hot air to dry clothes. Common fix for poor heating performance.

Fix refrigerator not cooling or warm temperatures with this compressor sealing pipe. Seals refrigerant lines to maintain proper pressure and cooling.

Control panel unresponsive or erratic? This protective cover shields your refrigerator's circuit board from moisture and debris. Straightforward install.

This lamp cover assembly is the replacement plastic lens that protects and diffuses the interior light so the compartment stays illuminated and the bulb is shielded. Restores finished appearance and prevents direct contact with the bulb. What it does:

• Covers and protects the interior lamp from impacts, spills, and debris
• Diffuses light for more even illumination inside the compartment
• Stops rattling or movement caused by a cracked or loose lens
• Helps prevent accidental contact with the bulb or wiring

• One cover assembly

• Disconnect power or unplug the appliance before starting any work
• Remove shelves or components as needed for access and set small parts aside
• Use a soft cloth and gentle pressure to remove/install the lens to avoid cracking
• Replace the lamp bulb if the light still fails after installing the new cover

Ice won't dispense but ice maker works? The ice bucket assembly stores and moves ice to the dispenser. Includes auger mount. DIY-friendly replacement.

Fix clicking noises or no ice dispensing with this icemaker and auger motor assembly. Includes ice maker tray and motor. DIY-friendly repair.

Ice maker stopped working or not making ice? This 12-cube ice maker assembly replaces failed units. DIY-friendly installation takes 10-30 minutes.

If your refrigerator isn't cooling properly or the freezer is warm, the evaporator fan motor may have failed. Direct replacement restores airflow.

Structural bracket that secures internal components in your refrigerator. Replace if cracked, broken, or worn to restore proper alignment and stability.

Fix exposed or damaged sensor areas with this refrigerator sensor cover assembly. Clips into place with a simple screwdriver removal. Quick 5-minute fix.

Secures and seals the water filter cartridge to supply lines. Replace if leaking, cracked, or dispensing poorly. Confirm fit with your model number.

Fix bad-tasting water or slow ice production with this refrigerator water filter assembly. Restores clean water flow to dispenser and ice maker.

Removes impurities and contaminants from water and ice. Replace every 6 months or 200 gallons for clean, fresh-tasting water. Verify fit by model.

Fix water dispenser leaks or slow flow with a new refrigerator water reservoir. Stores chilled water inside the fresh food section for steady dispensing.

Leaking water line connections? This inline tube connector joins two sections of tubing for a secure, leak-resistant seal. Quick 10-minute fix.

Fix water dispenser not working or leaking inside your refrigerator door with this secondary water valve. Direct replacement part for french door models.

Leaking water from your refrigerator or no water/ice from dispenser? This water inlet valve controls flow to ice maker and dispenser. DIY repair in 30 min.

Rail connector for refrigerator shelves and drawers. Replace if cracked, broken, or missing to restore proper rail alignment and support functionality.

Interior light won't turn off when door closes? This refrigerator door switch cover protects and aligns the switch for proper operation. Simple DIY fix.

Small trim cap that covers exposed fasteners or access holes on your refrigerator. Replace if cracked, broken, or missing to restore finished appearance.

Tube cover for refrigerator water lines. Replaces cracked, broken, or missing covers that protect tubing connections. Installs over exposed tubes.

Secures internal components in place to prevent rattling and misalignment. Replace if cracked, broken, or missing. Confirm fit with your model number.

Replacement home bar cover for bottom-mount refrigerators. This plastic cover snaps over the home bar dispenser area. Needed when cracked or broken.

Seals refrigerator door to maintain temperature and efficiency. Replace if torn, cracked, or not sealing properly. Verify fit with your model number.

Lower door hinge for bottom-mount refrigerators. Attaches the door to the cabinet frame. Replace if cracked, bent, or worn to restore proper door alignment.

Fix a broken ice bucket door latch or cracked cover with this refrigerator ice bucket cover assembly. Restores proper ice storage and dispenser operation.

Front cover for refrigerator door bin. Replaces cracked, broken, or missing covers on bottom-mount and standard refrigerator door storage bins.

Keeps refrigerator air fresh by filtering odors and contaminants. Replace every 6 months or when indicator alerts. Confirm fit with your model number.

Freezer not cooling below 24°F or refrigerator running too warm? This defrost thermostat sensor monitors temperature and signals the control board.