Need Help?
Call or text
Show parts
Sheet metal screw secures refrigerator panels, trim, and brackets. Replace missing, stripped, or corroded screws to restore proper fit and assembly.
Mounting screw for refrigerator interior components like fan brackets, ice maker assemblies, and shelving. Replace if stripped, missing, or corroded.
Air tower assembly that directs airflow in your refrigerator's fresh food compartment. Replaces cracked, broken, or damaged air towers with missing clips.
Replaces cracked, broken, or missing water filter cover trim on your refrigerator. Secures the inline filter assembly and keeps the compartment sealed.
Usually ships within 4 - 14 days
White plastic clip that secures the rear of refrigerator shelves or drawer rails to the cabinet wall. Replace if cracked, broken, or missing.
Front mounting grommet for refrigerator ice makers. Secures ice maker assembly to freezer wall. Replace if cracked, missing, or worn to restore stability.
Secures refrigerator panels, brackets, and trim. Replace if screw is stripped, missing, or no longer holds components tightly in place.
Rubber grommet secures the base grille on your refrigerator. Replace if cracked, worn, or missing to restore a snug fit and reduce vibration or rattle.
Replacement dial for refrigerator chill/pan drawer temperature control. Snaps onto control shaft. Replace if broken, cracked, or missing for easy adjustments.
Small linkage secures and positions the pan-chill assembly in your refrigerator, keeping the drain collector aligned. Replace if cracked or broken.
Fix uneven cooling or frozen fresh food with this refrigerator air damper shutter. Controls airflow between compartments. Takes 15-30 minutes to install.
Collects defrost and condensation water from the evaporator area to keep your refrigerator interior dry. Replace if cracked, damaged, or missing.
Discharge pan chill duct directs cold air in your refrigerator's cooling system. Replace if cracked, broken, or missing to restore proper airflow.
Replacement control knob for your refrigerator's deli or snack drawer temperature adjustment. Restores ability to set airflow when original is broken or missing.
Self-adhesive foam strip seals gaps in your refrigerator's evaporator cover and drain trough. Replace when worn, compressed, or during rust repairs.
Protective grille cover that mounts over the temperature sensor in your refrigerator. Replace if cracked, broken, or missing to properly shield the sensor.
Fix inconsistent temps or ice buildup on evaporator coils? This sensor seal protects accuracy. DIY-friendly with wire splicing. Video guide available.
Refrigerator cover shield assembly that protects internal components. Replace if your shield is cracked, broken, or missing to restore proper coverage.
Replacement light shield for your refrigerator. Covers and protects the interior light bulb. Order a new shield if your original is cracked or missing.
Replace your worn or broken refrigerator bottom hinge pin. Supports the door and serves as the lower pivot point on the bottom hinge assembly.
Replace your refrigerator's light lens cover to restore proper illumination. Install when cracked, yellowed, or missing. Confirm fit with your model number.
Refrigerator light lens cover protects the bulb and diffuses light. Replace if cracked, yellowed, or missing to restore proper illumination. Verify fit.
Interior light not working? This refrigerator light socket restores lighting when bulbs burn out sockets. Quick minutes-long DIY fix for most models.
Illuminates your refrigerator interior. Replace when burned out or flickering. Appliance-rated for durability. Verify wattage and base type match.
Replacement top hinge pin for refrigerator doors. Provides the upper pivot point for smooth door swing and proper alignment. Replace if bent or worn.
Bottom hinge that supports the refrigerator door weight and serves as the pivot point. Replace if worn, cracked, or causing door misalignment and sagging.
Hex head screw for refrigerator panels, brackets, and assemblies. Replaces missing, stripped, or rusted fasteners to secure components properly.
Fix interior lights that won't turn on, stay on constantly, or delay when opening the door. This switch replacement takes 10-15 minutes with basic tools.
Replaces the water filter in your refrigerator to bypass filtration. Installs in the filter housing to maintain water flow when a filter isn't needed.
Holds the water filter and connects water lines in your refrigerator. Replace if cracked, leaking, or causing low water pressure. Confirm fit by model.
Foam insulation wrap for refrigerator manifold. Reduces heat transfer and condensation around refrigerant lines. Replace if torn, compressed, or missing.
This part is discontinued by the manufacturer and is no longer available for purchase.
Replacement water tank cover for your refrigerator. Installs over the internal water reservoir. Order if your cover is cracked, broken, or missing.
Replacement evaporator drip pan for GE refrigerators. Collects defrost water beneath the evaporator. Replace if cracked, rusted, or leaking onto shelves.
This is an evaporator cover assembly that is used in many refrigerators. It is a component that is located on the top of the evaporator at the back of the fresh food compartment in the refrigerator. It acts as a protective part for this essential component of the appliance. The evaporator helps remove heat from water, air, and other items inside the refrigerator.If the evaporator cover assembly is cracked or broken, it will no longer be capable of protecting the evaporator and should be replaced. The typical tools needed include a flathead screwdriver and a Phillips screwdriver. Make sure the refrigerator is unplugged for safety reasons. Remove the door bins and vegetable drawers to gain access to the fresh food evaporator cover assembly. Take out the screws to remove it from the refrigerator. Install the new component in the same location and reassemble the refrigerator. Plug it back in before using it.Designed for refrigerators, this is an authentic OEM replacement part. It is directly sourced from the manufacturer and sold on an individual basis. This evaporator cover assembly is designed to be compatible with General Electric refrigerators.
Replaces broken or cracked door closure lever assembly in your refrigerator. Installs at base channel under kickplate to help doors close properly.
Replacement door closure spring for refrigerator hinges. Installs on door hinge assembly to provide tension for proper closing. Needed when broken or worn.