Parts for Kenmore Elite 72187583611: Interior Parts(L) Parts

Control panel template cover for microwaves. Replaces the outer casing and faceplate. Needed when original is cracked, dented, or damaged from impact.

Binding head screw that fastens microwave panels and components. Replaces missing, stripped, or damaged screws to restore secure assembly and eliminate rattling.

Replacement mounting screw for microwave panels and components. Secures loose or rattling parts when original screws are stripped, missing, or damaged.

Replacement screw for securing panels, brackets, and internal components. Restores tight fit and proper alignment when original hardware is stripped or missing.

Secures panels, brackets, or internal components in your microwave. Replace this fastener if it's missing, stripped, or damaged to restore stability.

Fastener nut secures internal components in your microwave. Replace if stripped, rusted, or missing to restore tight hold and proper panel alignment.

Broken burner holder causing uneven heating or ignition issues? This auxiliary burner holder supports your simmer burner for reliable lighting and stable flame.

Mounts on the cooktop to support and center the auxiliary burner assembly. Replace if burner won't light evenly or flame is weak. Confirm fit with your model.

Replace your damaged or warped microwave outer door frame to restore proper fit and seal. Ensures stable door support and correct closure. Verify fit.

Sealing tape for microwaves creates an airtight barrier around cavities and components. Replace if peeling, cracked, or causing heat/moisture leaks.

Protective shield that covers internal components on the microwave door. Replace if cracked, broken, or tabs have snapped off during handle or latch repair.

Fix a microwave door that won't latch or close properly with this door latch hook. This metal hook secures the gasket for a tight seal. DIY repair in minutes.

Microwave door won't stay closed or latch? This door latch spring provides tension to secure the door shut. DIY repair in under 10 minutes with video help.

Microwave not responding to buttons or display blank? This control board assembly regulates functions and power levels. Moderate difficulty repair.

Mounting bracket that secures the control panel assembly to the microwave frame. Replace if cracked, bent, or broken to restore proper panel alignment.

Fix unresponsive controls or erratic microwave operation with this sub controller assembly. Restores proper signal management for secondary functions.

Flat case panel for microwave installations. Replaces cracked, damaged, or missing exterior case components. Essential for maintaining appearance.

Replacement glass turntable tray for your microwave cavity. Sits on the roller support and rotates food during heating. Order if your tray is cracked or broken.

Wire harness for microwaves and microwave/hood combos. Connects internal electrical components. Replace if damaged, frayed, or burnt connections.

Fix uneven heating or wobbling turntable with this rotating tray assembly. Replaces damaged or missing parts to restore smooth rotation and consistent cooking.

Fix a microwave turntable that won't rotate with this AC synchronous motor. Common repair for models that heat but don't turn. Takes 15-30 minutes.

Mounting plate for microwave installation. Secures microwave unit to wall or cabinet. Replace if bent, cracked, or damaged during installation or removal.

Turntable not rotating or making noise? This coupler shaft connects the motor to the glass tray for even heating. Takes seconds to install—no tools needed.

Replacement microwave turntable tray that restores rotating surface for even heating. Replaces cracked, chipped, or broken glass trays in most models.

Replacement vent grille cover for microwaves. Installs at the top or front to cover internal components. Replace if cracked, broken, or missing tabs.

Secures the interior light bulb in your microwave. Replace if the lamp is loose, rattles, or won't stay in position. Verify fit with your model number.

Captures grease and cooking residue from exhaust air to protect the blower and maintain airflow. Replace when saturated or damaged. Confirm fit with your model.

Weak or no ventilation? This microwave fan motor restores proper airflow to prevent overheating and eliminate cooking odors. Direct repair.

Threaded nut assembly secures internal components in your microwave. Replace if stripped, worn, or missing to eliminate rattling and maintain alignment.

Replaces cracked or broken protective housing cover that shields internal components from debris and moisture. Installs over control wiring area.

Burner won't ignite or flame is uneven? This gas range burner base supports the burner cap and channels gas for consistent ignition and stable flames.

Decorative front trim panel for microwaves. Replaces cracked, broken, or missing decor trim. Installs at bottom front of unit with screws from behind panel.

Restores full-screen illumination for clearer, brighter images. Replace to fix dark, dim, or unevenly lit displays. Verify fit with your model number.

Secures and protects your microwave's filter, maintaining proper airflow and positioning. Replace if cracked, broken, or filter won't stay in place. Verify fit with your model number.

Mounting bracket that secures internal microwave components. Replace if your original bracket is cracked, broken, worn, or missing to restore stability.

Inner perimeter trim that snaps onto the microwave door frame. Secures the door choke and maintains proper shielding. Replace if cracked, broken, or missing.

Connector bar for microwave and microwave/hood combo units. Replace this structural component if it's cracked, broken, or missing to restore proper assembly.

Fix a microwave vent drawer that won't stay closed or secure. This hood locker catches and holds the sliding vent in position. DIY repair in 30 minutes.

Fix a microwave door that won't stay closed or latch properly with this door locker mechanism. Simple repair restores secure door closure.

Microwave not heating evenly or turntable wobbling? This glass turntable plate rotates food for consistent heating. Simple 2-minute swap—no tools needed.

Mounting support bracket for microwaves and microwave-hood combos. Secures unit to cabinet or wall. Replace if bent, cracked, or missing hardware.

Fix a microwave door that won't close or latch properly. This door latch holder secures the latch assembly for reliable door alignment and operation.

Fixes microwave that won't start, won't heat, or shuts off during cooking. This door lock holder assembly includes all 3 safety switches. Moderate DIY repair.

Microwave won't start or runs with door open? Failed door switch prevents safe operation. Simple DIY fix with basic tools in under 30 minutes.

Microwave won't start or runs with door open? This interlock door switch is a common fix. DIY repair in under 30 minutes with a torx bit.

Fix a microwave door that won't stay closed or pops open during use. This latch keeper holder restores proper door catch and alignment for safe operation.

Microwave won't heat? A failing high-voltage capacitor disrupts the heating circuit. This part stores electrical energy for consistent operation.

Mounting bracket for microwave and microwave/hood combo units. Secures the appliance to the wall or cabinet. Replace if bent, cracked, or missing.

Fix inaccurate cooking or sensor errors with this microwave sensor bracket. Secures the humidity sensor for proper automatic cooking. Simple 15-minute repair.

Exhaust duct for over-the-range microwaves. Connects the exhaust vent to external ducting. Replace if cracked, damaged, or missing for proper ventilation.

Fix loud rattling or scraping noises from your microwave with a new cooling fan blade. Prevents overheating by circulating air around internal components.

Microwave won't heat but runs normally? A failed magnetron is the likely cause. This part generates the microwaves that cook food. Moderate DIY repair.

If your microwave won't power on or shuts off intermittently, a damaged power cord may be the cause. This assembly restores secure electrical connection.

Fix F4 error codes or sensor cook failures with this microwave humidity sensor. Restores automatic cooking cycles. Moderate DIY difficulty.

Fix loud noise, humming, or overheating in your microwave. This cooling fan motor restores proper airflow. Moderate difficulty repair with basic tools.

Replace your microwave's interior or underside light bulb when dim or burned out. Restores visibility for monitoring food. Confirm fit with your model.

Microwave won't turn on or has no power? A failed thermostat often causes complete power loss. Moderate DIY repair requires disassembly to access.

Microwave not heating or making loud buzzing noise? The high voltage diode regulates power to the magnetron. DIY repair typically takes 30-45 minutes.

Wire harness assembly for microwaves and microwave/hood combos. Replaces damaged, frayed, or broken wiring connections inside the unit.

Microwave won't power on? A blown fuse assembly is often the culprit. This part protects your microwave's circuit from overcurrent and short circuits.

Microwave suddenly loses all power? This thermal safety thermostat monitors temperature and cuts power when overheating occurs. DIY-friendly repair.

Microwave overheating or shutting off? This cooling fan assembly restores proper airflow to control components. Direct-fit replacement for failed units.

Mounting bracket for microwaves. Secures the unit to cabinetry or wall. Replace if bent, cracked, or missing to ensure proper installation support.

Interior bottom plate panel for microwaves. Covers and protects the oven floor from spills and debris. Replace if cracked, warped, stained, or missing.

Protects microwave interior light bulb from grease and moisture. Replace if cracked, discolored, or broken to restore proper lighting. Verify fit with your model.

Removes cooking odors, smoke, and grease from recirculating microwave vents. Replace when odors persist despite cleaning. Confirm fit by model number.

Holds the light bulb and maintains electrical connection in your microwave. Replace when socket is cracked, heat-damaged, or causes flickering lights.

Noise filter assembly reduces operational sound in your microwave. Replace if you notice increased noise or vibration during use. Verify fit with your model number.

Microwave overheating or shutting off? This cooling fan assembly restores proper airflow to control components. Direct-fit replacement for failed units.

Plastic cover that encloses and protects the stirrer fan assembly. Replace if cracked, melted, warped, or missing to keep debris out of the fan area.

Structural mounting bracket for microwave installation. Secures microwave to wall or cabinet. Replace if bent, cracked, or missing for safe support.

If your microwave's ventilation isn't circulating air properly, this circulation motor restores airflow. Direct-fit synchronous motor replacement.

Fix scraping and clunking noises from your microwave with this motor support bracket. Secures motor positioning and reduces vibration. 10-minute repair.

Interior light dim or uneven? This clear lens cover protects the bulb and restores even illumination. Simple snap-in installation in minutes.

Replacement filter support plate for microwave ovens. Secures and positions the grease filter in place. Order a new part if yours is cracked or broken.

Exhaust duct for over-the-range microwaves. Replaces cracked, damaged, or missing ducts that vent cooking fumes and steam from your kitchen.

Microwave overheating or shutting off unexpectedly? This safety thermostat monitors temperature and cuts power when overheating occurs. Simple repair.

Mounting supporter bracket for microwaves. Installs on cabinet or wall to provide structural support. Replace if bent, cracked, or missing hardware.

If your microwave won't start or makes a buzzing sound before dying, the motor capacitor may have failed. This part restores reliable motor operation.

Rotating support plate that sits beneath the microwave glass turntable tray. Replace if cracked, broken, or worn to restore stable, centered rotation.

Metal mounting plate for over-the-range microwaves. Installs between wall/cabinet and microwave unit to anchor and stabilize. Replace if missing or damaged.

Complete hardware kit for mounting your microwave. Includes all brackets, screws, and fasteners needed for secure installation. Replaces missing or damaged parts.

Holds the damper assembly in place inside the microwave cavity above the wave stirrer. Replace if bracket is bent, broken, or missing during installation.

Exhaust damper for microwave venting systems. Installs on rear exhaust to regulate airflow. Replace if cracked, broken, missing, or not sealing properly.