Parts for Lg LMVH1711BD/00: Latch Board Parts

Binding head screw that fastens microwave panels and components. Replaces missing, stripped, or damaged screws to restore secure assembly and eliminate rattling.

Replacement mounting screw for microwave panels and components. Secures loose or rattling parts when original screws are stripped, missing, or damaged.

Flat washer for microwave fastening hardware. Distributes load and prevents surface damage. Replace if worn, missing, or cracked to maintain secure connections.

Replace your microwave's missing or stripped mounting nut. This hardware secures components during installation. Order now if your original nut is lost.

Replacement screw for securing panels, brackets, and internal components. Restores tight fit and proper alignment when original hardware is stripped or missing.

Hardware washer that distributes fastener load and maintains proper spacing in your range. Replace if missing, worn, or damaged to restore secure mounting.

Secures the storage drawer to your range frame. Replace this nut if it's stripped, cracked, or missing and the drawer won't stay properly attached.

Mounting screw for microwave installation. Secures microwave housing or trim components. Replace if stripped, missing, or damaged during installation.

Mounting screw for microwave installation. Secures microwave to cabinet or wall bracket. Replace if stripped, rusted, or missing during reinstall.

Replaces cracked, broken, or warped outer door frame on your microwave. Secures door glass and maintains proper alignment. Restores appearance.

Fix a microwave door that won't close or latch properly with this door lock assembly. Simple repair takes 15-30 minutes with basic tools.

Microwave door won't stay closed or latch? This door latch spring provides tension to secure the door shut. DIY repair in under 10 minutes with video help.

Glass turntable tray for microwaves. Supports dishes and rotates for even heating. Replace if cracked, broken, or missing to restore proper rotation.

Secures the fuse in your microwave. Replace if melted, cracked, or causing poor fuse contact. Verify fit with your model number before ordering.

Replace your cracked glass tray or broken roller ring to restore smooth, stable rotation. Fits inside microwave cavity to support dishes during cooking.

Turntable not rotating in your microwave? This synchronous motor powers the turntable rotation. Moderately easy repair that restores even heating.

Replace cracked, cloudy, or broken outer door window glass on your microwave. This tempered glass panel restores clear viewing of food during cooking.

Drive shaft that connects the motor to the turntable system in your microwave. Replace when the original shaft is worn, stripped, or damaged.

Broken or damaged vent grille preventing proper ventilation? This microwave vent grille cover restores airflow and appearance. DIY-friendly fix.

Captures grease, smoke, and odors from cooking to maintain clean kitchen air. Replace when clogged or discolored despite cleaning. Confirm fit with your model.

Halogen bulb that illuminates the cavity or cooktop below your microwave. Replace when dim, flickering, or burned out. Confirm fit with model number.

Replace your cracked, chipped, or missing microwave glass turntable tray. Restores the rotating platform for even heating and easy cleaning.

This rear cover assembly protects internal components at the back of the appliance and restores the cabinet's finished interior look. It keeps wiring and parts enclosed for safer, quieter operation after repairs. What it does:

• Covers and shields the appliance's rear interior components from dust and accidental contact
• Helps reduce vibration noise and drafts that can come from exposed components
• Provides a mounting/snap-in surface for wiring harnesses and clips
• Restores the cabinet appearance and helps maintain proper airflow paths

• Disconnect power (unplug or switch off breaker) before beginning work
• Remove shelves/panels as needed for access; retain all fasteners for reassembly
• Align clips/tabs carefully to avoid breaking plastic; use gentle pressure to snap into place

Washer door won't lock or latch properly? This lock mounting bracket secures the door lock assembly, restoring reliable door closure and operation.

Microwave won't start or light stays on when door closes? This door latch holder assembly secures the latch mechanism for proper switch engagement.

Microwave won't start or runs with door open? Failed door switch prevents safe operation. Simple DIY fix with basic tools in under 30 minutes.

Microwave won't start or runs with door open? This interlock door switch is a common fix. DIY repair in under 30 minutes with a torx bit.

Microwave won't heat? A failing high-voltage capacitor disrupts the heating circuit. This part stores electrical energy for consistent operation.

Fix weak or noisy ventilation with this microwave blower fan. Restores proper airflow when exhaust isn't working. Moderate DIY repair in 30-45 minutes.

Replace your microwave high voltage transformer when the unit runs but won't heat food. Requires intermediate electrical skills and about 1 hour.

If your microwave runs but won't heat food, the magnetron has likely failed. This tube generates the microwaves needed for cooking. Moderate DIY repair.

Fix F4 error codes or sensor cook failures with this microwave humidity sensor. Restores automatic cooking cycles. Moderate DIY difficulty.

Fix a microwave that overheats or shuts off unexpectedly with this cooling fan motor. Direct replacement part restores proper ventilation and cooling.

If your microwave won't heat or overheats, the thermostat may be faulty. This temperature control part regulates heating cycles for safe operation.

Microwave won't heat? This humidity sensor monitors moisture and temperature to control cooking cycles. Restores heating function when microwave stops working.

Turntable won't spin or rotates unevenly? This microwave turntable motor restores smooth rotation. Easy DIY repair—most complete it in under 10 minutes.

Microwave turntable not rotating? This synchronous AC motor drives the turntable rotation. Common DIY repair, typically takes 15-30 minutes.

If your microwave heats unevenly or makes unusual noises, a damaged stirrer fan cover may be the cause. This cover protects the fan and ensures proper heat distribution. Easy DIY fix.

Halogen bulb that illuminates the cavity or cooktop below your microwave. Replace when dim, flickering, or burned out. Confirm fit with model number.

This replacement chamber is the appliance's inner cavity that holds food and components, restoring the enclosure where heating or processing occurs. It provides the correct fit and containment needed for safe operation. What it does:

• Replaces a damaged or dented inner cavity to restore proper containment and appearance
• Helps maintain correct airflow and spacing for components inside the appliance
• Reduces heat/steam escape caused by cracks or deformation (common symptom: uneven cooking or visible damage)
• Prevents metal edges or sharp points that could snag components or insulation

• One chamber (inner cavity) as shown

• Installation may require removing exterior panels and internal components
• Power and/or gas must be disconnected before beginning any repair
• Handle carefully to avoid scratching or bending the new chamber; wear gloves to protect hands

Replace a faulty microwave heater if your unit isn't heating food properly or stops working. Simple repair that restores full heating performance.

Microwave not spinning or making unusual noises? This motor drives the turntable rotation. Moderate difficulty repair that restores even cooking.

This insulator is a small molded pad that cushions and isolates appliance components to reduce vibration and limit heat or electrical transfer. It helps protect nearby parts and maintain quieter operation. What it does:

• Cushions panels or assemblies to reduce rattling and vibration during operation
• Provides thermal/electrical separation to protect adjacent components
• Helps prevent wear from metal-on-metal contact and reduces noise
• Commonly replaced when torn, cracked, missing, or degraded

• One insulator mounting pad as shown

• Disconnect power and water before starting any repair
• Inspect surrounding fasteners and mounting points; replace damaged clips or screws as needed
• Clean mating surfaces and press the insulator firmly into its mounting location; use manufacturer-recommended adhesive only if original design requires it

If your microwave won't start or makes a buzzing sound before dying, the motor capacitor may have failed. This part restores reliable motor operation.

Replace cracked, broken, or damaged door glass for your microwave. This transparent glass panel installs in the door frame, restoring appearance.

This side heater plate is the oven's replacement heating plate that helps direct and radiate heat inside the oven cavity for consistent baking and roasting. Replaces a damaged or worn side heater to restore even heating performance. What it does:

• Radiates heat along the oven side to help maintain even internal temperatures
• Commonly used when one side of the oven is heating weakly or unevenly
• Works with the oven's heating system to support bake/broil cycles
• Helps prevent hot spots caused by a cracked or corroded side heater plate

• One side heater plate

• Disconnect power to the appliance before beginning work to avoid shock
• Handle the plate carefully to avoid bending or damaging mounting tabs and insulation
• Inspect connector wires and terminal block; replace any damaged wiring or fasteners
• After installation, restore power and test oven heat in a controlled bake cycle

Metal mounting plate for over-the-range microwaves. Installs between wall/cabinet and microwave unit to anchor and stabilize. Replace if missing or damaged.

Installation kit provides mounting hardware to securely attach your microwave to the wall and cabinet. Replaces missing, damaged, or worn brackets and fasteners.

Holds the damper assembly in place inside the microwave cavity above the wave stirrer. Replace if bracket is bent, broken, or missing during installation.

Exhaust damper for microwave venting systems. Installs on rear exhaust to regulate airflow. Replace if cracked, broken, missing, or not sealing properly.