Need Help?
Call or text
Show parts
The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells. This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.
This part is discontinued by the manufacturer and is no longer available for purchase.
Replacement bolt fastener for securing washer panels, brackets, and assemblies. Needed when original bolt is missing, loose, or stripped causing rattling.
The Counterweight is an OEM part for Frigidaire washing machines. It is located at the front of the tub, helping to offset the weight of heavily loaded clothes and maintaining the best drum balance during centrifugal spin cycles. The counterweight is cast and matched to each washer model to distribute weight as efficiently as possible.
Causes of a bad counterweight can include cracks or fractures from extensive machine vibrations over time, or damage incurred during removal/installation.
Symptoms of a bad or missing counterweight include:
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Secures the inner bellow seal to the tub in front-load washers. Replace if rusted, broken, or causing seal leakage. Tight installation requires patience.
Flexible gasket sealing washer door to drum, preventing leaks during cycles. Replace when torn, leaking, or showing mold buildup. Confirm fit.
Replacement mounting nut for washers and laundry appliances. Secures internal components and panels. Order if original nut is stripped, missing, or broken.
Usually ships within 4 - 14 days
Suspension spring that supports and stabilizes the washer tub assembly. Replace if spring is broken, stretched, detached, or causing excessive vibration.
Support plate for washer components. Mounts internally to secure parts in place. Replace if cracked, bent, or broken to restore proper structural support.
Outer cabinet shell that houses and protects washer components. Replace if your shell is cracked, dented, rusted, or structurally damaged to restore appearance.
Restores proper tension to washer mechanisms. Replaces worn, broken, or stretched springs causing binding, sagging, or uneven movement in drum suspension.
Hex washer head screw secures panels, brackets, and drum assemblies in washers. Replace rusted, stripped, or missing screws to prevent rattling.
Replaces a cracked, broken, or missing washer drum baffle. Mounts inside the drum to lift and tumble clothes during the wash cycle. Easy installation.
Secures the drum baffle (lifter vane) to your washer drum. Replace missing, stripped, or loose screws to keep baffles firmly attached and prevent rattling.
Washer won't spin or makes loud noises? A faulty drive motor is often the cause. Moderate DIY repair with video guide. Fixes E58 error codes.
Secures the motor housing to its mounting bracket in washers and laundry centers. Replace if screw is missing, stripped, or damaged during service.
Seals washer tub halves to prevent leaks between drum sections. Replace if leaking onto floor or between shell halves. Confirm fit with model number.
Drive belt transfers motor power to drum for tumbling and spinning. Replace when worn, stretched, or broken to restore smooth drum rotation. Verify fit.
Includes: pulley and pulley bolt.
Replacement mounting screw for washers and laundry centers. Secures components like pulleys, brackets, and panels. Replace if missing, stripped, or damaged.
Front shock absorber kit stabilizes the washer tub during spin cycles. Replace worn, loose, or broken dampers to restore smooth operation and stability.
Stabilizes the washer tub during spin cycles. Replace worn or broken rear shock absorbers to restore smooth operation and prevent drum contact with cabinet.
Secures the shock absorber to the outer tub in your washer. Replace if the pin is broken, cracked, or missing to restore proper shock mounting.
Mounting bracket secures components inside your laundry center. Replace if bent, broken, or missing to eliminate rattling and restore stability.
Secures and organizes wires inside your appliance. Replace if broken, loose, or missing to prevent wire damage. Verify fit with your model number.
Fix a washer that won't drain or makes buzzing sounds during drain cycle. This pump assembly removes water from the tub. DIY-friendly repair restores draining.
Screens lint and debris from wash water as it exits the tub. Replace if damaged, missing, or clogged to restore proper draining. Verify fit by model number.
Connects the outer tub to the drain pump in front-load washers. Replace if cracked, torn, leaking, or clogged to stop water damage and restore drainage.
Secures hoses to pumps, tubs, and valves preventing leaks. Replace if worn, loose, or causing drips during cycles. Confirm fit with your model number.
Pressure hose and adapter assembly that connects the air chamber to the water level sensor. Replace if tube is cracked, pinched, or leaking air.
Washer air chamber connects the water level pressure switch to the tub. Replace if cracked, kinked, or disconnected causing water level issues.
Washer hose clamp secures water inlet and drain hoses to prevent leaks. Replace if loose, cracked, or causing water drips. Verify fit with your model number.
Secures the door boot seal to prevent leaks in front-load washers. Replace if rusted, broken, or seal is loose. Verify fit with your model number.
Phillips pan head screw for securing panels and components in appliances. Replace missing, stripped, or corroded screws during repairs or maintenance.
Replacement drain hose for washing machines. Transports water from tub to household drain. Replace if cracked, kinked, leaking, or damaged from wear.
Cable tie secures wiring bundles and hoses inside your laundry center. Prevents loose routing, rubbing, and rattling noises. Replace if broken or missing.
Replacement mounting bracket that secures washer panels and components. Needed when original bracket is cracked, broken, or missing, causing loose or misaligned parts.
10-inch heating element for washers. Mounts on the back of the outer tub assembly under the spinner. Replace if cracked, burned out, or corroded.
Support clip that secures the heating element in place inside your washer drum. Replace if broken, cracked, or missing to properly hold the element.
Replacement #8 x 0.500 inch screw for securing panels, trim, and brackets in appliances. Needed when original fasteners are stripped, lost, or missing.
Tub ring that secures and seals between the outer tub and basket assembly. Replace if cracked, broken, or worn to restore proper tub alignment.
Cushion bumper for washer installation. Absorbs vibration and protects cabinet surfaces. Replace if cracked, compressed, or missing to restore proper support.