Parts for Lg LFX25974SB/05: Other Parts

Reduces sediment and particulates to improve water quality and protect your refrigerator. Replace every 6 months for optimal performance and taste.

Replacement mounting screw for refrigerator assembly. Secures components and panels inside your fridge. Order a new screw if yours is stripped or missing.

This replacement customized screw secures internal panels and components to restore proper fit and reduce movement. A small but essential fastener for repairs that stop rattling and prevent loose parts from causing damage. What it does:

• Fastens panels, brackets, or trim so parts stay aligned and stable
• Stops vibration-related noise caused by loose fasteners
• Helps prevent parts from shifting or falling during operation
• Replaces stripped or missing screws to restore proper assembly

• Disconnect power before servicing the appliance to avoid shock or injury
• Use the correct screwdriver or driver bit to prevent stripping the head
• Tighten until snug—do not overtighten, which can strip threads or crack components
• Inspect mating threads and replace if damaged; replace only with the exact OEM screw

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.

Replacement mounting screw for refrigerator panels, brackets, and assemblies. Needed when original fastener is stripped, worn, or missing.

Lower cover assembly for bottom-mount refrigerators. Replaces cracked, broken, or missing lower covers. Installs at the base of the refrigerator.

Adjustable leveling leg that threads into the refrigerator base frame to support and stabilize the unit. Replace worn, broken, or missing legs.

Internal air duct assembly for bottom-mount refrigerators. Routes airflow from fan housing through cabinet. Replace when cracked, damaged, or leaking air.

Freezer drawer roller assembly enables smooth gliding of your refrigerator's lower drawer. Replace if drawer sticks, wobbles, or is hard to open. Confirm fit with your model number before ordering.

Dual roller wheel assembly that mounts to the rear wall of the freezer drawer. Replace when wheels are missing, broken, or cracked for smooth sliding.

Bottom freezer basket for refrigerators. Organizes frozen foods in the lower freezer compartment. Replace if cracked, broken, or damaged from impact.

Replacement shelf assembly for refrigerators. Installs inside fresh food compartment. Needed when original shelf is cracked, broken, or missing.

Replace your cracked or broken refrigerator shelf assembly. This glass shelf installs inside your fridge to organize and support food items.

Replace your cracked or broken refrigerator shelf assembly. This glass shelf installs inside your fridge to organize and support food items.

Replace your cracked or broken refrigerator shelf assembly. This glass shelf installs inside your fridge to organize and support food items.

Secures and supports shelves inside your refrigerator. Replace if cracked, broken, or missing to properly hold shelves in place and restore stability.

Guides refrigerator drawer or rack for smooth sliding. Replace if bent, broken, or drawer sticks. Confirm fit with your model number before ordering.

Replacement guide rail for refrigerator freezer drawers. Keeps drawers aligned and sliding smoothly. Order if your rail is cracked, broken, or worn.

Internal air duct assembly for bottom-mount refrigerators. Routes airflow from fan housing through cabinet. Replace when cracked, damaged, or leaking air.

Replacement fresh room tray assembly for LG and Kenmore refrigerators. Install this tray if yours is cracked, broken, or has a damaged handle.

Air duct connector for refrigerators. Channels airflow between compartments. Replace if cracked, broken, or missing to restore proper air circulation.

Replace your cracked, warped, or missing refrigerator tray cover. Keeps contents contained and restores clean appearance in tray compartment.

Replaces cracked or damaged crisper drawer in your refrigerator. Restores secure storage for fruits and vegetables with proper support and organization.

Replacement crisper drawer assembly for your refrigerator's fresh food compartment. Restores organized produce storage when original is cracked or missing.

Display cover assembly for your refrigerator control panel. Protects internal components and provides a finished look. Replace if cracked or damaged.

Broken or missing light cover leaving your refrigerator interior dim or exposed? This lens snaps into place in minutes to restore even lighting.

Fix dim or exposed interior lighting with a new light lens cover. Protects the bulb from moisture and impact. Easy 5-minute DIY repair with video guide.

Replacement guide assembly that secures and aligns internal refrigerator components. Use when panels sit loose, or guides are cracked, broken, or missing.

Drawer rail guide assembly for bottom-mount refrigerators. Supports and aligns drawer slides for smooth operation. Replace if cracked, broken, or worn.

Plastic and metal guide assembly that positions and secures internal components in your refrigerator. Replace if cracked, broken, or missing.

Supports and guides refrigerator drawer for smooth opening and closing. Attaches to cabinet wall. Replace if cracked, worn, or causing drawer misalignment.

Supports and aligns pull-out drawer slides for smooth, even gliding. Replace if your rail guide is cracked, broken, or missing to restore stable drawer operation.

Seals refrigerator door to maintain temperature and prevent frost buildup. Replace if torn, cracked, or causing air leaks. Verify fit with model number.

Cap cover for bottom-mount refrigerators. Installs to conceal screws or openings. Replace if cracked, broken, or missing for a finished appearance.

Replacement cap cover for your refrigerator. This plastic cover snaps into place to conceal hardware or protect internal components. Order now if broken or missing.

A replacement hinge cover that hides and protects the door hinge hardware for a clean look and safer operation. Restores a finished appearance and keeps fingers or clothing from catching on exposed hinge parts. What it does:

• Covers and protects exposed hinge components from dirt and damage
• Keeps hinge hardware out of sight for improved appearance
• Reduces the chance of clothing or fingers catching on the hinge
• Helps maintain smooth door movement by protecting hinge area from debris

• Disconnect power to the appliance before attempting any repair; also shut off water supply if working on a unit with water connections.
• Remove any trim or screws securing the old cover; this part typically snaps or screws into place — keep hardware if reusing.
• Wear gloves to protect hands from sharp edges and to avoid cosmetic damage to the cover.

Exterior emblem nameplate that mounts to your refrigerator's front panel. Replaces missing, cracked, or faded badges to restore a clean look.

Restores tight door seal to prevent leaks and maintain consistent temperatures. Replace when seal is cracked, torn, or no longer sealing properly.

Restores a tight seal around your refrigerator door to keep cold air in and warm air out. Replace when worn, torn, or cracked to maintain efficiency.

Mullion plate assembly installs between French doors on bottom-mount refrigerators. Replace if cracked, broken, or spring attachment points are damaged.

Connects French doors on refrigerators. Replace if cracked, broken, or spring-damaged. Installs between doors to maintain proper seal alignment.

Drawer guide rail for refrigerator storage drawers. Ensures smooth gliding operation. Replace if broken, cracked, or missing to restore proper drawer function.

Storage basket that mounts inside your refrigerator door for organizing condiments and small items. Replace if cracked, broken, or missing.

Removable door basket that mounts inside your refrigerator door to hold bottles, condiments, and small items. Replace cracked, broken, or missing bins.

Mounts inside the refrigerator door to hold bottles, jars, and condiments. Replace if cracked, broken, or missing to restore organized storage space.

Replaces broken or missing door bin on your refrigerator. Attaches to inner door rails for secure storage of bottles, jars, and condiments.

Door basket assembly mounts to refrigerator door for secure storage of bottles, jars, and condiments. Replace cracked, loose, or missing bins.

Door basket assembly mounts to refrigerator door for secure storage of bottles, jars, and condiments. Replace cracked, loose, or missing bins.

Door stopper assembly for bottom-mount refrigerators. Installs on door to limit opening angle and prevent damage. Replace if cracked, broken, or missing.

Door stopper assembly cushions and limits refrigerator door travel. Replaces cracked, broken, or worn stoppers causing misalignment or door slamming.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

Plastic door stop that limits refrigerator door swing range. Replaces broken, cracked, or missing stoppers causing doors to swing too wide or close improperly.

Refrigerator door handle assembly that mounts to the exterior door. Replace this handle if yours is cracked, broken, damaged, or no longer secure.

Replacement slide rail for refrigerator drawers. Installs on the side of crisper or deli drawers to enable smooth gliding. Order if cracked or broken.

Plastic holder that secures the drawer rail to the refrigerator frame. Replace if cracked, broken, or missing to properly support and align drawers.

Secures sliding rail assembly for smooth drawer movement in bottom-mount refrigerators. Replace if cracked, broken, or loose to restore alignment.

Protects electrical connectors in your refrigerator from moisture and debris. Replace if the cover is cracked, broken, or missing to restore shielding.

Replace a worn or broken freezer drawer bar connector assembly to restore smooth gliding and proper alignment. Confirm fit with your model number.

Replace a worn or broken freezer drawer bar connector assembly to restore smooth gliding and proper alignment. Confirm fit with your model number.

Replaces cracked or broken control connector housing on your refrigerator. Protects electrical connections from damage and dust. Direct fit replacement.

Replace your refrigerator's handle bar if it's cracked, broken, or worn. This structural component attaches to the door for smooth opening and closing.

Replace a worn or broken freezer drawer bar connector assembly to restore smooth gliding and proper alignment. Confirm fit with your model number.

Replacement door hinge for bottom-mount refrigerators. Installs on the cabinet to support and pivot the door. Needed when hinge is cracked or broken.

Specialized spanner tool for turning slotted nuts and collars on refrigerator components. Replace if lost, worn, or damaged to safely adjust fittings.

Replacement ring for your refrigerator. Installs on internal components to secure or seal parts. Order a new ring if yours is cracked or missing.

Refrigerator mullion door won't close or seal properly? This spring operates the center divider flapper door. DIY-friendly installation in 5 minutes.

Upper door hinge assembly for bottom-mount refrigerators. Mounts at the top of the cabinet to support the door. Replace if cracked, broken, or lost.

Upper door hinge for refrigerators. Mounts on the right side to secure the door. Replace if cracked, broken, or missing to restore proper door support.

Ice freezing in holder or chute not opening fully? This ice dispenser door seals the chute to prevent frost buildup and air leaks. Easy DIY repair.

Ice chute door not opening fully? This dispenser door link connects the actuator to the door for smooth operation. Simple DIY fix for binding doors.

This holder bracket secures internal refrigerator components in place. Replace if your original bracket is cracked, broken, or missing to restore stability.

This display cover is the clear protective lens that fits over the appliance control panel, restoring a clean appearance and protecting the underlying display and buttons from dirt, spills and wear. What it does

• Protects the control board and display from splashes, grease and daily wear.
• Keeps touchpads and button legends visible and readable.
• Helps maintain a finished, factory look for the control panel.
• Replaces a cracked, scratched or discolored lens that affects appearance or usability.

• One display cover (control panel lens)

• Disconnect power to the appliance before starting any work.
• Remove any trim or bezels covering the control panel as required to access the lens.
• Handle the lens carefully to avoid scratches; use a soft cloth and appropriate fasteners.

Fix a refrigerator that won't cool or start with this compressor start device. Works with the PTC thermistor to help your compressor run properly.

Refrigerator stopped cooling after power outage? The compressor overload protector prevents overheating damage. Easy DIY fix when compressor won't run.

Fix erratic temperature readings or sensor errors with this PTC sensor cover. Shields the sensor from debris and damage. Simple 5-minute snap-on repair.

Fix a refrigerator not cooling properly with this compressor sealing pipe. Essential sealed system component for restoring proper refrigeration.

Water pooling under your refrigerator? This defrost drain tray collects and channels condensation water to prevent leaks and buildup beneath the unit.

Front cover panel for your refrigerator door. Snaps into place to restore appearance and protect controls. Replace if cracked, broken, or missing clips.

Replaces broken or missing refrigerator door stop. Limits door travel to prevent over-extension and maintain proper alignment and smooth operation.

Precision pin for refrigerator drawer slide roller bearings. Replaces bent, worn, or missing pins that cause drawers to stick or drag. Restores smooth operation.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

Fix refrigerator not cooling properly or running constantly with a new drier assembly. Removes moisture from refrigerant. Requires EPA-certified technician.

Replacement drip tray for refrigerators. Installs under evaporator coils to catch condensation and defrost water. Replace if cracked, warped, or missing.

Refrigerator not cooling properly? This wire condenser assembly helps dissipate heat for efficient cooling. Common fix for warm fridge issues.

Replace your broken or cracked refrigerator fan grill assembly. Protective cover that installs over the evaporator fan in the freezer compartment.

Covers and protects the interior compartment fan while directing airflow. Replace if cracked, broken, or missing to restore safe air circulation.

Fix error code ER DH or ice buildup in your freezer with a new defrost control assembly. Regulates defrost cycles to prevent frost. Moderate DIY repair.

If your refrigerator light stays on when the door closes, the door switch likely failed. This easy 5-minute DIY fix restores light control.

If your refrigerator is noisy or not cooling evenly, the evaporator fan motor may need replacement. 15-30 minute repair requires freezer panel removal.

Secures and supports the motor assembly in your refrigerator, keeping it aligned and reducing vibration. Replace if cracked, broken, or worn to restore stable mounting.

Fix a refrigerator that won't cool properly or makes unusual noises. This drive motor restores proper operation for consistent temperature control.

Uneven cooling or noisy damper? This damper motor support bracket secures the air control assembly for proper airflow between compartments. DIY fix.

Refrigerator not cooling properly? This damper motor support secures the air damper assembly that controls airflow between compartments. Simple DIY fix.

Fix unresponsive controls or features that won't activate with this refrigerator push button switch. Simple replacement restores button functionality.

Supports and stabilizes your refrigerator door for proper alignment. Replace if bracket is cracked, broken, or causing door misalignment issues.

Replacement mounting bracket that secures internal components to the cabinet frame. Needed when original is cracked, bent, or broken, causing loose parts.

Covers and protects the interior compartment fan while directing airflow. Replace if cracked, broken, or missing to restore safe air circulation.

Fix frost buildup in your freezer with this defrost heater. Solves cooling issues and prevents ice accumulation on evaporator coils. Moderate DIY repair.

LED light assembly restores interior refrigerator illumination. Replace when lights dim, flicker, or fail completely. Verify fit with your model number.

The Light Bulb is an OEM part for LG refrigerators. It can be used in either the fresh food section or freezer compartment, providing illumination for easy visibility of the stored items.

Causes of a faulty light bulb can include regular wear and tear, reaching the end of its lifespan, or accidental breakage. These factors can result in issues such as a dark or poorly lit interior, making it difficult to see the contents of the refrigerator.

Symptoms of a bad light bulb may include:

• No illumination or dim lighting inside the refrigerator
• A flickering or intermittent light
• Visible damage or broken filament inside the bulb

This LG OEM bulb is also compatible with Sears/Kenmore models. 

Refrigerator won't cool or compressor won't start? This run capacitor provides the electrical boost needed for smooth compressor operation. DIY repair.

Refrigerator not cooling or making clicking sounds? The compressor run capacitor provides electrical boost to start and run the compressor motor reliably.

Fixes refrigerator power loss, sparking, or intermittent operation. This power cord assembly restores safe electrical connection from wall outlet to appliance.

Refrigerator not cooling evenly or making loud noises? This evaporator fan motor circulates cold air across coils to maintain consistent temperatures.

Fixes refrigerator not cooling, not responding to controls, or display issues. This main control board restores electronic functions and cycle operation.

If your refrigerator display is dead, shows error codes, or behaves unpredictably, this sub PCB assembly processes inputs and controls specific functions.

Protective cover assembly that shields the printed circuit board (PCB) in your refrigerator. Replace if cracked, broken, or missing to protect electronics.

Replace the interior light housing cover in your refrigerator. Needed when the original lamp case is cracked, broken, or missing. Installs inside the fridge.

Protects and diffuses the interior lamp for even lighting. Replace if cracked, yellowed, or broken to restore visibility and shield the bulb from spills.

Ice maker stopped working or producing misshapen ice? This complete assembly replaces a faulty ice maker. Moderate DIY repair, about 1 hour with basic tools.

Ice won't dispense but ice maker works? The auger motor drives ice from the bin to the chute. Moderately easy repair with our video guide and DIY tips.

Fix inaccurate temperature readings or sensor errors with this refrigerator sensor control board. Restores proper sensor communication and feedback.

Freezer not cooling below 24°F or refrigerator running too warm? This defrost thermostat sensor monitors temperature and signals the control board.

Leaking water from your refrigerator or no water/ice from dispenser? This water inlet valve controls flow to ice maker and dispenser. DIY repair in 30 min.

Stores and supplies water to your refrigerator's dispenser and ice maker. Replace if cracked, leaking, or damaged from mineral buildup or freezing.

Plastic water line tube for refrigerators. Installs in the water supply system. Replace if cracked, split, leaking, or damaged to restore proper fit.

Fix water leaks from your refrigerator with this water line tube assembly. Stops leaks caused by brittle or kinked tubing and restores normal flow.

90-degree elbow connector for 1/4" refrigerator water lines. Replaces cracked, leaking, or broken tube fittings between filter and dispenser.

Replacement spring for refrigerator internal mechanisms. Needed when original spring is broken, stretched, or missing. Restores proper tension and function.

Fix no water or ice issues with this water inlet valve. Common when ice maker won't fill or dispenser trickles. Easy 10-minute DIY with video guide.

Leaking water from your refrigerator or no water/ice from dispenser? This water inlet valve controls flow to ice maker and dispenser. DIY repair in 30 min.

Secures the water filter cartridge and routes water to the dispenser and icemaker. Replace if cracked, leaking, or not seating the filter properly.

Reduces sediment and particulates to improve water quality and protect your refrigerator. Replace every 6 months for optimal performance and taste.

Covers and protects refrigerator tubing inside the cabinet. Replace this tube cover if the original is cracked, broken, or missing to restore proper appearance.

Refrigerator pipe holder bracket secures water lines and tubing in place. Replace if cracked, broken, or missing to properly support pipes inside your fridge.

This replacement pipe holder secures a small appliance pipe or tube in place, reducing movement and vibration to help prevent noise, wear, or accidental disconnection. It restores proper routing and support for the pipe. What it does:

• Secures a pipe or tubing to the appliance frame or chassis to keep it from shifting
• Reduces rattling or vibration caused by loose plumbing or tubing
• Helps maintain proper alignment to avoid chafing or contact with other components
• Useful when a cracked, broken, or missing clip allows pipe movement

• Turn off and unplug the appliance before accessing internal components
• Remove any panels or covers to reach the pipe clip location
• Snap the clip over the pipe into the existing mounting tab; replace any damaged mounting hardware

Home bar cover panel for bottom-mount refrigerators. Replaces cracked, broken, or missing exterior home bar covers. Restores appearance and finish.

Seals the refrigerator door to keep cold air in and moisture out. Replace when worn or deformed to restore proper cooling and reduce frost buildup.

Roller component for the ice dispenser door handle on bottom-mount refrigerators. Replaces broken, worn, or missing rollers. Ensures smooth handle operation.