Parts for Lg LMXC23796S/00: Other Parts

Replacement mounting screw for securing panels, brackets, and assembliance components. Needed when original screws are missing, stripped, or damaged.

Secures the hinge to your refrigerator cabinet or door. Replace this bolt if stripped, missing, or corroded to restore proper door alignment and stability.

Replacement mounting screw secures panels, brackets, and components inside your refrigerator. Needed when original screw is missing, stripped, or worn.

Replacement mounting screw for refrigerators. Secures internal components and panels. Order when original hardware is stripped, lost, or damaged.

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.

Replacement screw for securing refrigerator panels and trim pieces. Restores proper fit when original fasteners are damaged, missing, or stripped.

Secures panels, brackets, and components inside your refrigerator. Replace this fastener if worn, missing, or stripped to restore proper assembly.

Replacement freezer door handle for bottom-mount refrigerators. Installs on the freezer compartment door. Order if your handle is cracked or broken.

Water pooling under your refrigerator? A damaged drain tube assembly causes leaks and water buildup. This direct-fit part restores proper drainage.

Fix water pooling or leaking inside your refrigerator by replacing a cracked or clogged drain tube assembly. Channels defrost water to the drain pan.

Adjustable leveling leg that threads into the refrigerator base frame to support and stabilize the unit. Replace worn, broken, or missing legs.

Fixes uneven cooling and temperature issues in your refrigerator. This air duct assembly restores proper airflow between compartments for consistent temps.

Small protective cap covers component connections or openings in your refrigerator. Replace when cracked, missing, or worn to protect against dirt and moisture.

Drawer tray assembly for bottom-mount refrigerators. Replaces cracked, broken, or worn drawer trays. Installs in fresh food compartment drawers.

Refrigerator drawer tray assembly that holds items in the fresh food or crisper drawer. Replace if cracked, broken, warped, or missing from your unit.

Replacement door basket for refrigerator door storage. Installs on the door interior to hold bottles and small items. Replaces cracked or broken bins.

Replacement drawer tray assembly for refrigerator drawers. Restores support and containment when original tray is cracked, warped, or damaged.

Replace your refrigerator door shelf net basket if damaged, cracked, or missing. This wire basket organizer installs on the door to hold items securely.

Glass shelf assembly installs in the fresh-food compartment to provide stable storage for food and containers. Replace when cracked, chipped, or missing.

Replace a cracked, broken, or missing glass shelf in your bottom-mount refrigerator. Restores flat storage surface for organized food placement.

Replaces cracked, broken, or worn glass shelf in your refrigerator's fresh-food compartment. Restores sturdy storage space and visibility.

Replaces cracked, broken, or worn glass shelf in your refrigerator's fresh-food compartment. Restores sturdy storage space and visibility.

Replaces cracked, broken, or worn glass shelf in your refrigerator's fresh-food compartment. Restores sturdy storage space and visibility.

Plastic cover assembly that sits on top of refrigerator crisper drawers. Replace if cracked, broken, or missing. Cover only; pans sold separately.

Rail guide assembly for refrigerator sliding racks and drawers. Installs on track to guide smooth movement. Replace if cracked, broken, or worn out.

Replacement rail guide assembly for refrigerator drawers. Installs on sliding drawer mechanism to keep drawers aligned and moving smoothly. Needed when cracked or broken.

Secures slide rail to mounting point in refrigerator drawers. Replace if cracked, worn, or missing to restore proper alignment and smooth drawer operation.

Connects and supports your refrigerator's freezer drawer to the hinge assembly. Replace this connector if it's cracked, broken, or missing to restore drawer alignment.

Supports and guides refrigerator drawers for smooth opening and closing. Replace when worn or cracked to restore proper alignment and prevent binding or tilting. Confirm fit with your model number.

Tray cover for bottom-mount refrigerators. Installs over interior storage tray. Replace if cracked, broken, or missing to restore appearance.

Secures and aligns refrigerator components to prevent shifting during use. Replace if bracket is cracked, broken, or missing to restore stable mounting.

Molded exterior panel that shields internal components. Replace when cracked or missing to restore proper fit and protection. Verify fit with your model.

Refrigerator drawer cover panel that sits on the front of your crisper or storage drawer. Replace if cracked, broken, discolored, or missing.

Drawer guide rail for bottom-mount refrigerators. Installs along the drawer sides to help drawers slide smoothly. Replace if cracked, broken, or worn.

Replacement drawer cover for your bottom-mount refrigerator. Covers the front of the drawer assembly. Order a new one if yours is cracked or damaged.

Guides your refrigerator drawer for smooth, aligned movement. Replace if drawer sticks, wobbles, or makes noise. Verify fit with your model number.

Replacement vegetable crisper drawer assembly for bottom-mount refrigerators. Installs in lower compartment to store produce. Needed when original is cracked or broken.

Replaces cracked or broken crisper drawer pan in your refrigerator. Provides sturdy surface for fruits and vegetables. Restores storage support.

Replace your cracked, broken, or missing refrigerator crisper drawer. This vegetable tray assembly restores produce storage in bottom-mount models.

Plastic cover assembly that sits on top of refrigerator crisper drawers. Replace if cracked, broken, or missing. Cover only; pans sold separately.

Fix a refrigerator not cooling properly or running too warm with this temperature sensor. Monitors internal temps to maintain proper cooling.

Guide assembly for refrigerator drawers. Mounts inside the cabinet to support smooth drawer gliding. Replace if cracked, broken, or causing drawer misalignment.

Door guide assembly for bottom-mount refrigerators. Replacement needed when the guide is cracked, broken, or worn. Ensures proper door alignment.

Rail guide assembly for refrigerator drawer systems. Mounts to cabinet interior to support smooth drawer gliding. Replace if cracked, broken, or worn.

Refrigerator drawer rail guide that attaches to the drawer frame and slides along the track. Replace if cracked, broken, or causing drawer misalignment.

Guide rail that keeps your refrigerator freezer drawer aligned and sliding smoothly. Replace this track component if worn, bent, or broken.

Fix refrigerator door misalignment or poor sealing with this door alignment magnet. Restores magnetic retention to keep panels and components secure.

Freezer door foam insulation assembly for bottom-mount refrigerators. Replaces damaged, cracked, or worn foam that provides thermal insulation.

Insulating foam assembly that installs inside your refrigerator's freezer door. Replace if cracked, compressed, or deteriorated for proper insulation.

Seals your refrigerator door to maintain temperature and reduce energy loss. Replace when worn, cracked, or causing frost buildup. Confirm fit with model.

Restore a tight door seal and prevent air leaks with this refrigerator door gasket. Replace when you notice frost buildup, condensation, or warm temps inside. Confirm fit with your model number.

This cover cap conceals screws or mounting hardware on your refrigerator. Replace if cracked, broken, missing, or discolored to restore a clean appearance.

Cover cap for bottom-mount refrigerators. Conceals screws or mounting points on interior or exterior surfaces. Replace if cracked, broken, or missing.

Refrigerator cover cap conceals screws or fasteners for a finished appearance. Replace if cracked, broken, or missing to restore clean look.

Plastic cover cap for refrigerators. Snaps onto shelves, hinges, or trim to conceal screws and mounting hardware. Replace if cracked, broken, or missing.

Left-side door handle trim for refrigerators. Restores finished appearance and edge protection. Replaces cracked, scratched, or missing trim pieces.

Exterior trim piece for refrigerator door handle. Replaces cracked, scratched, or worn decorative trim to restore original appearance and finish.

Covers and protects the refrigerator door hinge assembly. Replace this cap if cracked, missing, or worn to restore a finished appearance and keep hinges clean.

Snap-on hinge cover assembly that restores your refrigerator's finished appearance. Replaces cracked, broken, or missing trim pieces around the hinge area.

Exterior emblem nameplate that mounts to your refrigerator's front panel. Replaces missing, cracked, or faded badges to restore a clean look.

Replacement freezer door handle for bottom-mount refrigerators. Installs on freezer compartment door. Replace if broken, cracked, bent, or missing.

Fix no water dispensing or water leaking under the ice maker door with this refrigerator water inlet valve. Controls water flow to dispenser and ice maker.

Door foam assembly that insulates your refrigerator door. Replaces worn, compressed, or damaged foam that reduces energy efficiency and temperature control.

Secures the door handle firmly to your refrigerator door. Replace this bracket assembly if it's cracked, stripped, or causing handle wobble or misalignment.

Cushions and limits refrigerator door movement to prevent slamming. Replace this stopper if cracked, worn, or missing to protect cabinet and hinges.

Replaces worn, cracked, or non-responsive control panel buttons on your refrigerator. Restores tactile feedback and proper panel appearance.

Replace your worn home bar door gasket to restore an airtight seal and maintain proper cooling. Prevents cold air loss and condensation. Confirm fit with your model.

Seals the refrigerator door to keep cold air in and warm air out. Replace if worn, torn, or moldy to restore proper temperatures and efficiency.

Replaces worn door gasket to restore airtight seal, prevent warm air leaks, reduce frost and condensation. Check your model number for proper fit.

Refrigerator drawer tray assembly that holds items in the fresh food or crisper drawer. Replace if cracked, broken, warped, or missing from your unit.

Replaces damaged or warped front cover assembly on your refrigerator. Restores finished appearance and protects internal components. Verify fit with model number.

Chipped or cracked dispenser lever? This cover protects the mechanism and restores a clean pressing surface. Simple snap-on installation in minutes.

Replaces cracked or broken refrigerator door bin. Securely holds bottles, jars, and small items on the door to keep contents organized and prevent spills.

Refrigerator door shelf bin installs on the refrigerator door for storing condiments and beverages. Replace if cracked, broken, or damaged.

Replacement hinge for refrigerator home bar door. Installs on the door assembly to secure and support the home bar compartment. Needed when cracked or broken.

Replacement door stopper for refrigerators. Cushions door closure to prevent slamming and reduce noise. Install if your original is cracked, broken, or missing.

Hinge-mounted stopper that controls your refrigerator door's opening angle. Replace if cracked, broken, or missing to restore smooth movement.

Mounts at the hinge to control door opening range and promote smooth closing. Replace if cracked, broken, or worn to restore proper door swing.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

Replace your cracked, scratched, or discolored refrigerator door handle. Installs on fresh food or freezer doors for a secure grip and updated look.

Replace a cracked, broken, or damaged refrigerator door handle. Installs on the refrigerator door to provide a secure grip for opening and closing.

This connector rail is a small replacement connector used to join or secure the wiring/harness along the appliance rail, helping maintain proper electrical routing and stable connections for reliable operation. What it does:

• Provides a secure connection point along a mounting rail to keep wiring harnesses routed and supported
• Helps prevent wires from snagging, rubbing, or becoming disconnected during use or door movement
• Reduces strain on terminals and harness ends by keeping wiring aligned and restrained
• Commonly replaced when cracked, broken, or when the connector no longer holds the harness securely

• One connector rail

• Disconnect power to the appliance before inspecting or replacing wiring components
• Replace only the listed connector;
• Use basic hand tools and avoid stretching or pinching the harness when installing
• If you find damaged wiring or terminals, repair or replace those parts before restoring power

Slide rail that guides and supports refrigerator drawers for smooth opening and closing. Replace if worn, bent, cracked, or causing noisy operation.

Restores smooth drawer operation in your refrigerator. Replace when drawers stick, sag, or don't glide properly. Verify fit with your model number.

Decorative cover cap for bottom-mount refrigerators. Replaces cracked, broken, or missing caps on door handles, hinges, or trim areas.

Ice maker won't eject ice cubes? This drive gear transfers motor power to rotate the ejector arm and harvest ice. Simple repair restores ice production.

Ice maker grinding or not ejecting cubes? This gear drives the ejector blades to push ice from the tray into the bin. Restores harvest cycles quickly.

Complete home bar door assembly for refrigerator replacement. Installs on bottom-mount models. Replace when door is cracked, damaged, or missing.

Refrigerator not responding to controls or components not working? This wire harness assembly restores electrical connections between the control board and parts.

Replace a cracked or broken cover support bracket in your bottom-mount refrigerator. Secures the internal cover panel in place. Direct fit part.

Center hinge assembly for bottom-mount refrigerators. Mounts between upper and lower doors to support and align proper closure. Replace if cracked or worn.

Lower hinge assembly secures the refrigerator door to the cabinet. Replace if hinge is cracked, broken, or worn causing door misalignment or instability.

Adjusts refrigerator door height for proper alignment and sealing. Replace if door doesn't close easily or seal correctly. Verify fit with model number.

Secures components inside your refrigerator. Replace if broken or missing to prevent rattling and ensure proper part alignment. Confirm fit with model.

Spanner wrench tool for adjusting refrigerator door hinges. Enables precise up-and-down door alignment in tight spaces. Replace if lost or damaged.

Handle bar for bottom-mount refrigerator doors. Replaces cracked, broken, or missing handle bars. Installs on door exterior for secure grip.

Secures and aligns your refrigerator door for smooth opening and proper sealing. Replace if door sags or closes unevenly. Verify fit with your model number.

Secures and aligns the top refrigerator door for smooth opening and proper sealing. Replace when door sags or won't close properly. Verify fit with your model.

Ice freezing in chute or water dripping from dispenser? This ice dispenser door assembly restores proper sealing. 15-minute DIY repair with video guide.

Microwave door won't latch or release properly? This lever holder bracket secures the door lever assembly to restore smooth door operation. Easy DIY fix.

This holder bracket secures internal refrigerator components in place. Replace if your original bracket is cracked, broken, or missing to restore stability.

Ice dispenser door spring maintains tension for smooth opening and closing of the ice compartment door. Replace if door won't seal or spring shows wear.

Secures the dispenser lever in place on your refrigerator. Replace if retainer is cracked, broken, or missing to restore proper lever stability.

Spring that tensions the ice dispenser door for proper closing and airtight seal. Replace if door won't close or ice gets stuck. Verify fit with model.

Fix dispenser drips and spills with this refrigerator dispenser funnel. Guides water flow cleanly to prevent messes. Simple 5-minute installation.

Ice stuck in dispenser door or won't dispense? This ice dispenser door lever controls ice release. DIY repair in under 15 minutes with video guide.

Fix unresponsive or stuck control panel buttons with this direct-fit button assembly. Restores reliable tactile input and control responsiveness.

Protective cover assembly for refrigerator electronic display panel. Replacement needed when original is cracked, broken, or discolored from impact or wear.

Clear protective lens that covers the control panel display. Replaces cracked, scratched, or yellowed covers to restore clean appearance and protect electronics.

Covers and protects the dispenser area on your refrigerator. Replace if cracked, broken, or scratched from repeated use and moisture exposure.

Ice won't dispense or keeps flowing? This ice dispenser button replaces broken levers causing continuous dispensing. DIY-friendly repair in 30-45 minutes.

Replaces a broken, cracked, or missing water dispenser button on your refrigerator. This snap-on part installs on the dispenser housing panel.

Refrigerator door handle assembly for models with decorative exterior finish. Replace if handle is cracked, broken, or buttons have fallen off.

Rubber cap for bottom-mount refrigerators. Installs on various internal components. Replace if cracked, worn, missing, or damaged to restore appearance.

Water pooling under your dispenser? This drip tray catches overflow and spills. Cracked or stained trays are easy to replace with basic tools.

Replace a cracked or missing control board cover to protect your refrigerator's PCB from dust and moisture. Simple snap-in installation restores proper enclosure.

NOTE: This part also requires software update kit CJT30000002. DO NOT INSTALL WITHOUT UPDATING SOFTWARE. Call for more information.

Refrigerator not cooling properly? This condenser coil assembly releases heat to keep your fridge cold. Professional installation recommended for evacuation.

Refrigerator not cooling or freezing over? This evaporator assembly circulates refrigerant to absorb heat and restore proper temperatures in your fridge.

Fix a freezer that won't cool or has excessive frost buildup. This evaporator assembly restores cold-air circulation and defrost performance.

Refrigerator not cooling or running warm? This compressor start relay and overload assembly regulates temperature and controls cooling cycles. DIY-friendly fix.

Refrigerator stopped cooling after power outage? The compressor overload protector prevents overheating damage. Easy DIY fix when compressor won't run.

Fix erratic temperature readings or sensor errors with this PTC sensor cover. Shields the sensor from debris and damage. Simple 5-minute snap-on repair.

Vibration-isolating grommet that mounts between the compressor and chassis. Replace if cracked, worn, or missing to restore proper cushioning.

Water pooling inside your refrigerator? This drip tray collects condensate and defrost water to prevent leaks. Direct-fit replacement part.

Fixes uneven cooling and scraping noises by directing airflow from the fan. This guide restores proper air circulation throughout your refrigerator.

Fix a refrigerator not cooling properly with this compressor sealing pipe. Essential sealed system component for restoring proper refrigeration.

Cosmetic cover panel for refrigerator home bar compartment. Replaces cracked, broken, or missing covers that affect appearance and door aesthetics.

Protective front cover panel for refrigerators. Installs on the exterior to conceal components. Replace if cracked, broken, or missing.

Outer front cover assembly panel for refrigerators. Protects internal components and restores appearance. Replaces cracked, damaged, or worn covers.

Replaces broken or missing refrigerator door stop. Limits door travel to prevent over-extension and maintain proper alignment and smooth operation.

Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

Drier assembly for refrigerators. Installs in the sealed refrigerant system to remove moisture and contaminants. Replace if damaged or worn during repair.

Fix uneven cooling or frozen food in fresh food section with this refrigerator air damper. Controls airflow between compartments to balance temperatures.

Fix a refrigerator that won't turn off the light or runs constantly with this door switch magnet. Works with reed switches. Simple DIY replacement.

Fix a dispenser that won't stop running or fails to dispense ice or water. This switch activates your dispenser when pressed. DIY-friendly repair.

Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.

Fix uneven cooling or noisy fan operation with a new circulation fan motor. This DC motor restores proper airflow across coils. Moderate DIY repair.

Fix a noisy refrigerator with this evaporator fan motor assembly. Replaces broken fans causing loud operation. DIY-friendly repair with basic tools.

Fix a refrigerator not cooling properly or displaying ER RF codes with this evaporator fan motor. Ensures even cooling throughout your fridge. DIY repair.

Replace your refrigerator's shroud cover if it's cracked, broken, or missing. This protective cover installs over internal components to provide a clean finish.

Fix unusual noise or vibration from your refrigerator with this motor bracket. Secures the motor assembly for quiet operation. DIY-friendly repair.

Protects your refrigerator's light bulb from moisture and damage. Replace if cracked, discolored, or broken to maintain proper lighting and safety.

Replace a damaged or broken motor cover in your refrigerator. This protective cover shields the motor assembly from dust and debris. Simple repair.

Cracked or missing light cover causing dim fridge lighting? This interior light lens protects the bulb and restores even illumination. Easy 5-minute fix.

Fix noisy refrigerator operation with this evaporator motor grommet. Reduces vibrations and quiets motor noise. Moderately easy DIY repair.

Replaces a worn or broken evaporator fan motor grommet in your refrigerator. Cushions the motor to reduce vibration and noise during operation.

Controls ice dispenser door opening and closing. Replace if door won't open, stays open, or motor makes no sound when dispensing. Mounts behind dispenser trim.