Parts for Crosley CME1645TDA: Oven,Cabinet Parts

The Wave Guide Cover is an OEM part for Frigidaire microwaves. The cover prevents food particles and moisture from entering the wave guide, helping to maintain the efficiency and safety of the microwave.

Causes of a bad wave guide cover can include exposure to high heat, splatters from food and liquids, or regular wear and tear. 

Symptoms of a bad wave guide cover include:

• Sparks or arcing inside the microwave
• Uneven cooking or heating
• Visible burns, cracks, or discoloration on the cover
• Noise or rattling sounds during operation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This mounting kit secures the appliance or a related component to its intended surface or frame, restoring a firm, stable installation. Replace worn or missing mounting parts to correct looseness, rattling, or misalignment.

• Anchors the unit/component to designated mounting points for proper support and alignment
• Helps reduce shifting, vibration, and noise from loose or failing mounts
• Replaces damaged, stripped, corroded, or missing brackets/fasteners
• Common signs: the unit feels loose, rattles, sags, or mounting hardware is broken

• Disconnect power at the breaker and shut off water or gas, if applicable, before servicing
• Support the appliance/component during removal and reinstallation to prevent tipping or damage
• Follow your model's installation instructions/template to locate mounting points and hardware
• Tighten hardware evenly; avoid overtightening into thin sheet metal or plastic

This mounting nut kit secures a threaded connection or component inside your appliance, keeping it tight and stable during operation. Replacing a worn or stripped nut restores a solid hold and helps prevent leaks, rattling, and poor performance. What it does:

• Fastens a component or fitting to its mating surface, maintaining proper alignment
• Restores grip when original threads are stripped, cracked, or worn
• Helps prevent vibration-related loosening during cycles
• Can resolve symptoms such as a loose/wobbly assembly, rattling noises, seepage at the joint, or visible thread damage

• One mounting nut kit

• Disconnect power; shut off water supply if the joint carries water
• Support the mating component while installing to avoid strain on plastic parts
• Start threads by hand to prevent cross-threading; tighten only until snug—do not overtighten
• Inspect any related gasket/O-ring and replace if worn or damaged

The Microwave Turntable tray is an OEM replacement part for Frigidaire microwaves. As the foundation of the microwave's cooking surface, the turntable tray is responsible for ensuring even cooking of foods by rotating slowly during the cooking process. This allows different areas of food to absorb equivalent amounts of energy. 

Causes of a bad turntable tray can include cracks or chips that develop due to repeated use over time. The motor that powers rotation may also fail due to normal wear. 

Symptoms of a bad turntable tray include:

• Uneven or incomplete cooking of foods
• The tray no longer rotates properly during cook cycles 
• Loud noises or vibration occurring when the microwave is in use
• Cracks, chips or other visible damage to the turntable surface

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This Support Ring is an OEM part for Frigidaire microwaves. This support ring is an integral component that sits beneath the microwave's turntable, providing stable and balanced support. It ensures the smooth rotation of the turntable, which is essential for even cooking and heating food. 

The support ring can become worn or damaged due to regular use, leading to issues with the turntable's rotation. Common causes of deterioration include mechanical stress, uneven weight distribution from dishes, or accidental damage.

Symptoms of a faulty support ring include:

• Unsteady or wobbly turntable movement.
• The turntable struggling to rotate or not rotating at all.
• Noises such as scraping or clicking when the microwave is in operation.
• Uneven cooking or heating of food, indicating a disruption in turntable motion.
• Visible cracks, breaks, or warping of the support ring.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

The Coupler is an OEM part for Frigidaire microwaves. It is responsible for providing a secure connection between the motor and the glass tray.  It enables the smooth rotation of the glass tray turntable, ensuring even heat distribution during the cooking process.

A bad coupler can occur due to wear and tear over time, accidental damage, or improper handling. Signs of a faulty coupler include the glass tray not rotating or turning unevenly during operation.

Symptoms of a bad coupler include:

• The glass tray not rotating 
• Uneven heating  
• Unusual noises  

Replace your faulty microwave glass tray turntable coupler with this genuine OEM Frigidaire part to restore your microwave. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This Turntable Motor is an OEM part for Frigidaire microwaves. Responsible for the rotation of the microwave's turntable, which ensures even cooking and heating of food. This motor ensures that the turntable operates smoothly and reliably, maintaining the efficiency of your microwave.

A malfunctioning motor can lead to uneven heating or cooking of food, as the turntable is integral to the microwave's ability to distribute heat uniformly.

Symptoms of a faulty turntable motor include:

• The turntable does not rotate when the microwave is in use.
• Intermittent or erratic movement of the turntable.
• Unusual noises coming from the turntable area during operation.
• Food is unevenly cooked or heated, indicating inconsistent turntable motion.
• The microwave operates normally except for the turntable function.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
 

This replacement frame restores the outer trim around the appliance door to its original fit and appearance, helping keep door components aligned and protecting internal parts from damage. What it does

• Replaces a cracked, warped, or visibly damaged door trim piece
• Secures door glass and inner components in place for proper operation
• Restores a finished look to the appliance front after impact or wear
• Helps prevent drafts and debris from entering around the door edge

• Disconnect power to the appliance before starting any repair
• Remove the door or necessary panels per the service manual to access mounting screws
• Keep track of screws and clips; work on a soft surface to avoid scratching

The Grease Filter is an OEM part for Frigidaire microwaves. This part traps grease and other particles generated during cooking, preventing them from accumulating on the internal components and the exhaust system.

Common causes of a bad grease filter include prolonged use without cleaning or replacement, accumulation of grease and food particles, and damage from high temperatures or physical impacts.

Symptoms of a bad Grease Filter include:

• Reduced ventilation efficiency
• Excessive smoke or odors during cooking
• Visible grease buildup on or around the filter
• The filter appearing clogged or damaged

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This temperature control thermostat regulates refrigerator temperature to keep food safely chilled. It replaces a faulty control to restore proper cycling and temperature stability for the fresh food compartment. What it does:

• Senses cabinet temperature and opens/closes the compressor/coolant circuit to maintain set temperature
• Can stop excessive cooling or prevent the compressor from running continuously when failing
• Commonly used when the refrigerator is too warm, too cold, or runs nonstop
• Works with mechanical temperature dials and capillary-sensor assemblies on compatible units

• Disconnect power to the appliance before servicing to avoid shock
• Handle any attached capillary sensor tube gently; avoid kinks or sharp bends
• Verify correct mounting and electrical connections; match terminals to the old thermostat

This Fuse is an OEM part for Frigidaire microwaves. It's a critical safety component designed to protect the microwave from electrical overload by breaking the circuit if the current is too high. This fuse is specifically tailored to fit and function properly with Frigidaire microwave models, ensuring safety and reliability.

Fuses in microwaves can blow due to power surges, electrical faults within the appliance, or overheating caused by restricted airflow or malfunctioning components. A blown fuse prevents the microwave from operating as a safeguard against potential electrical damage or fire hazards.

Symptoms of a blown fuse include:

• The microwave suddenly stops working and doesn't turn on.
• No response from the microwave's control panel or display.
• The microwave is completely unresponsive, even when the door is opened or closed.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

This mesh grease filter captures grease and food particles from exhaust air in your over-the-range ventilation system, helping protect the blower and keep the area around your cooktop cleaner. Replace a bent or saturated filter to restore proper airflow. What it does:

• Traps grease and particulates from cooking exhaust
• Helps maintain airflow through the venting system
• Common signs of replacement: torn/warped mesh, broken tabs, heavy grease saturation, or the filter falling out

• 1 mesh grease filter

• Disconnect power before servicing and let surfaces cool
• Wear gloves; filter edges can be sharp
• Access the filter from the bottom, release the latch or tabs, slide out the old filter, and seat the new one securely in the same orientation
• Do not operate the appliance without the grease filter installed

This capacitor helps the refrigerator compressor start and run smoothly, restoring reliable motor operation and improving cooling performance when the original capacitor fails. It's a direct-replacement electrical component used on compatible Frigidaire appliances. What it does:

• Supplies the brief electrical boost the compressor motor needs to start
• Supports continuous motor operation to maintain consistent cooling
• Commonly linked to symptoms such as the compressor struggling to start, loud humming, or reduced cooling
• Helps prevent hard starts that can lead to overheating or repeated cycle failures

• One capacitor

• Disconnect power to the appliance before service to avoid electric shock
• Capacitors can hold a charge—discharge safely before touching terminals
• Verify terminal connections match the original and secure all wiring after replacement

This replacement cover is a molded protective housing that shields internal appliance components from dirt and accidental contact, helping keep parts secure and maintain safe operation. What it does:

• Protects internal wiring, connectors, or small components from dust and debris
• Helps prevent accidental contact with components while servicing or using the appliance
• Keeps parts held in place to reduce rattles or movement
• Restores missing or cracked covers that expose internal areas

• Disconnect power to the appliance before beginning any work
• Typically installed with a few screws or clips after removing the access panel
• Handle gently to avoid snapping mounting tabs; replace any damaged fasteners

The Latch Hook is an OEM replacement part for Frigidaire microwaves. It is an internal component that helps securely latch and lock the microwave door during operation. The latch hook works with the door handle mechanism to ensure the door is properly fastened to prevent leaks of microwave energy and for safety. 

Causes of a bad latch hook can include wear and tear over time, damage from repeated use of the door latch, or issues with the latch hook spring or connecting components. 

Symptoms of a bad latch hook include:

• The microwave door not closing or latching securely  
• Difficulty closing or popping open the door during a cycle
• Leaks of microwave energy from around the door seals
• Error codes related to door-latching problems

This OEM Frigidaire replacement part is also compatible with Electrolux, Westinghouse, and Kelvinator microwaves. 

This door release lever connects the push-button to the latch assembly inside the microwave. Replacing a worn lever restores smooth, reliable door opening so the button works on the first press.

• Transfers motion from the door-open button to the latch hooks to release the door
• Helps resolve a door that won't open when the button is pressed
• Addresses a button that feels loose, sticks, or lacks resistance
• Replaces a cracked or broken lever causing intermittent door operation

• Unplug the microwave and discharge the high-voltage capacitor before servicing
• Remove the grille and control panel to access the interlock/latch area
• Note spring and pivot orientation and transfer any reusable hardware
• Test door release action before completing reassembly

The Door Switch is an OEM part for Frigidaire microwaves, designed to ensure the appliance operates safely by signaling when the door is securely closed. This switch is critical for preventing the microwave from running if the door is open, a key safety feature that protects users from exposure to microwave radiation.

Causes of a bad Door Switch can include mechanical failure due to normal wear and tear from repeated opening and closing of the microwave door. 

Symptoms of a bad Door Switch include:

• The microwave not starting or heating when the door is closed.
• The appliance continuing to operate when the door is opened.
• Intermittent operation or sudden stopping during use.
• Displaying error messages related to the door or switches.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Door Switch is an OEM part for Frigidaire microwaves. It plays a crucial role in the microwave's overall function by detecting when the door is open or closed. The door switch communicates this information to the control board, enabling it to safely operate the microwave's electronic components and magnetron when the door is shut.

Symptoms of a bad door switch include:

• The microwave failing to operate or function properly with the door closed  
• Inability to start or pause operation when the door is opened
• Error codes or failure messages appearing on the display related to door functionality

Causes of a bad door switch can be wear and tear over time, damage from repeated opening and closing of the microwave door, or impact from accidental mishandling. 

This OEM replacement is also compatible with Electrolux, Admiral, Crosley, White-Westinghouse, and Kenmore models.
 

This thermostat is a temperature-sensitive switch used in select appliances to regulate heat or provide over-temperature protection. Replacing a failed thermostat restores consistent temperature control and helps protect internal components from heat-related damage.

• Monitors temperature at its mounting point and opens/closes the circuit at a factory-set threshold
• Regulates heating cycles or functions as a high-limit safety cutoff (application-dependent)
• Failure open can cause no heat or premature shutdown
• Failure stuck closed can lead to overheating, erratic temperatures, or extended run times

• Disconnect power and allow the appliance to cool before servicing
• Note wire locations; transfer one lead at a time to the new thermostat
• Mount flush and secure to the mating surface/bracket for accurate sensing; ensure firm terminal connections
• After installation, run and observe an initial cycle to confirm normal operation

This evaporator fan motor circulates cold air across the freezer evaporator and through the fridge, helping maintain even temperatures and proper cooling. Replaces a failed fan motor to restore airflow and reduce frost buildup. What it does:

• Spins the evaporator fan blade that moves cold air through the freezer and fresh-food compartments
• Restores airflow when the fan has stopped running or runs intermittently
• Helps prevent uneven cooling and excessive frost on the evaporator coil
• Can reduce unusual noise if the old motor is noisy or worn

• Disconnect power to the appliance before starting any repair
• Access typically requires removing interior freezer panels or back panels; use proper tools and keep fasteners organized
• Handle sharp sheet metal and insulated components carefully; wear gloves and eye protection

This fan blade mounts to the refrigerator fan motor to move air through the appliance for proper cooling and temperature circulation. Replaces a worn or damaged blade to restore airflow and improve cooling efficiency. What it does:

• Spins on the fan motor to circulate air across the evaporator or condenser coils
• Restores proper airflow when a cracked or broken blade causes reduced cooling
• Helps stop vibration or rattling caused by bent or missing blades
• Can reduce motor strain from an imbalanced or damaged blade

• Disconnect power to the appliance before starting any repair
• Remove access panels and fan shroud to reach the blade; keep track of mounting hardware
• Replace carefully to avoid bending the blade; ensure correct orientation on the motor shaft

The Thermostat is an OEM part for Frigidaire microwaves. This thermostat monitors and regulates the temperature within the microwave, ensuring that it operates within safe limits and prevents overheating.

Causes of a bad thermostat can include wear and tear from regular use, electrical issues, or damage from power surges or overheating events, which can impair its ability to regulate temperature.

Symptoms of a bad Thermostat include:

• The microwave not heating properly
• The microwave shutting off unexpectedly
• The unit not turning on at all
• Overheating or burning smells during operation

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Thermal Cut Off is an OEM part for Frigidaire microwaves. It is located inside the microwave cavity or near the magnetron tube. It is designed to monitor the temperature and interrupt the electrical current if it exceeds a safe limit. This prevents the microwave from overheating and potentially causing damage or hazards.

Causes of a faulty or damaged thermal cut off can include regular wear and tear, electrical malfunctions, or overheating due to excessive use or blocked airflow. These factors can result in issues such as the microwave not heating food properly, frequent shutdowns during operation, or complete failure to function.

Symptoms of a bad thermal cut off may include:

• The microwave not generating heat
• The microwave turning off abruptly during operation
• The microwave not starting or experiencing intermittent operation

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This replacement capacitor restores reliable starting power to a refrigerator's compressor and fans, helping the appliance reach and maintain proper cooling. Use it to address start-up failures and intermittent cooling issues. What it does:

• Provides the electrical boost needed for compressor and fan motors to start reliably.
• Stabilizes motor operation during run cycles to prevent frequent cycling or poor cooling.
• Common symptoms of a failing capacitor: compressor humming without starting, fridge not cooling, or intermittent compressor operation.
• Designed to match the original part's function for proper motor start and run performance.

• Always disconnect power to the appliance before testing or replacing the capacitor.
• Capacitors can hold a charge; discharge safely.
• Verify replacement matches the original capacitor's ratings and mounting style before installation.

This high-voltage diode rectifies AC to DC in the microwave's high-voltage circuit so the magnetron can generate heat. When it fails, the oven may run normally but won't heat or may blow fuses.

• Converts high-voltage AC to DC for magnetron operation
• Maintains correct polarity and protects the HV circuit
• Common failure symptoms: runs but no heat, loud hum then shutdown, blown internal fuse, or tripping breaker
• Visible burn or damage on the diode or leads may be present

• Disconnect power before servicing; high voltage is present even when unplugged
• Safely discharge the high-voltage capacitor before touching HV components
• Match orientation to the original—polarity matters; ensure tight, insulated connections

This is a replacement air vent/grille that restores proper airflow through the appliance cabinet. It directs cooling/heating air where needed to help maintain consistent temperatures and efficient operation. What it does

• Directs air through the cabinet or duct to maintain even airflow and temperature distribution
• Helps prevent restricted airflow that can cause warm spots or longer run cycles
• Reduces airflow obstructions that can lead to frost build-up in cooling systems
• Restores a finished opening where a damaged or missing vent allowed dust or debris entry

• Disconnect power to the appliance before beginning any service
• Typically installs by snapping into a cabinet opening or fastening with screws; remove minimal panels as needed
• Handle carefully to avoid damaging plastic tabs or surrounding trim

This mounting plate secures internal components to the appliance chassis, restoring proper support and alignment for reliable operation. It's a simple replacement that helps stop rattling and keeps parts positioned correctly. What it does:

• Provides a stable mounting surface for internal parts and assemblies
• Restores correct alignment to reduce vibration and noise
• Prevents components from shifting or contacting other parts
• Supports safe, continued operation by keeping parts secured

• Disconnect power to the appliance before beginning any repair
• This is a mechanical replacement; basic hand tools are typically required
• Handle edges carefully; metal parts can be sharp
• Verify part fit and orientation against the existing piece before final fastening

This replacement rubber cushion cushions contact points to reduce noise, dampen vibration and help protect cabinet or door surfaces from wear. It restores the soft stop and reduces rattling where rubber bumpers are used. What it does:

• Absorbs impact and prevents hard metal-on-metal contact
• Reduces squeaks and rattling from doors, drawers, or panels
• Helps keep aligned parts from chipping or scuffing adjacent surfaces
• Durable rubber design resists compression and repeated use

• Disconnect power or unplug the appliance before servicing when applicable
• Typically installs by pressing into a hole or over a stud; no special tools required for most applications
• Inspect mounting area for debris or damage before installing

This outer cabinet is the main housing that supports and encloses the refrigerator compartment, restoring the unit's structural support and finished appearance. Replaces a damaged, dented, or corroded outer shell to help maintain proper door alignment and insulation coverage. What it does

• Provides the main structural enclosure for the refrigerator, holding interior components in place.
• Restores a smooth exterior surface and protects internal insulation from moisture and damage.
• Helps maintain proper door alignment and sealing by supporting hinge and trim locations.
• Addresses symptoms such as visible dents, rusted or damaged outer panels, or gaps between panels and trim.

• One outer cabinet housing (quantity: 1), as specified by the OEM part number.

• Disconnect power and remove food from the appliance before beginning work.
• Cabinet replacement may require removal of doors, trim, and internal components.
• Use proper lifting assistance and protective gloves—cabinet panels can be large and have sharp edges.

The Vent Damper is an OEM part for Frigidaire microwaves. It is designed to control the flow of air through the microwave’s ventilation system, ensuring proper ventilation during operation. This component helps to prevent the backflow of air, keeping the microwave's interior and its surroundings free from unwanted odors and heat.

Causes of a bad vent damper can include wear and tear over time, accumulation of grease or debris, or damage from external impact. 

Symptoms of a bad vent damper include:

• Poor ventilation
• Unusual odors lingering around the microwave
• Excessive heat buildup
• Increased noise during operation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Damper is an OEM part for Frigidaire microwaves. This part regulates airflow within the microwave, ensuring that steam and odors are properly vented out during cooking.

Causes of a bad damper can include wear and tear over time, buildup of grease and debris, or damage from high temperatures.  

Symptoms of a bad Damper include:

• Poor ventilation during cooking, leading to lingering odors and steam
• The microwave overheating or not ventilating properly
• Unusual noises coming from the damper area
• The damper not opening or closing as it should

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Mounting Bracket is an OEM part for Frigidaire microwaves. This part securely attaches the microwave to the wall or cabinetry. This bracket is designed to ensure that your microwave is mounted safely and remains stable during operation, preventing any potential movement that could lead to damage or operational issues. 

Causes of a bad Mounting Bracket can include physical damage from improper installation or accidents, wear and tear over time that weakens the bracket's integrity, and corrosion due to exposure to moisture or kitchen vapors, which can compromise its strength and stability.

Symptoms of a bad Mounting Bracket include:

• The microwave tilting or sagging
• Unusual vibrations or noise during operation, indicating that the microwave is not securely fastened
• Visible damage or rust on the bracket itself, which could weaken its support

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This replacement power cord restores the appliance's connection to household power so it can operate safely and reliably. It replaces a worn, damaged or missing cord to help eliminate power interruptions and visible cord damage. What it does

• Provides the electrical connection between the appliance and the wall outlet.
• Restores power when the original cord is frayed, cut, melted or otherwise damaged.
• Helps stop intermittent power or no-power conditions caused by a faulty cord or plug.
• Maintains safe insulation and strain-relief at the appliance entry point when installed correctly.

• Disconnect the appliance from power before inspecting or replacing the cord.
• Route the cord using the appliance's built-in strain relief or cord retainer to prevent pinching.
• Replace damaged strain reliefs or terminal covers; secure all connections firmly.

This replacement vent covers the appliance's vent opening and directs airflow out of the cabinet. Replace a broken, loose, or missing vent to restore proper ventilation and maintain a clean, finished appearance.

• Channels exhaust air to help release heat and moisture from the unit
• Shields internal components from debris while allowing proper airflow
• Helps reduce rattling or vibration when secured correctly
• Common signs: cracked or missing louvers, loose fit, noise, or poor ventilation

• Disconnect power and allow the appliance to cool before servicing
• Remove screws or clips securing the old vent; retain hardware for reuse
• Align the new vent and secure without overtightening to prevent damage
• Restore power and verify proper airflow